Hub/Switch Installation Guide

Chapter 6 HPSS Configuration
304 September 2002 HPSS Installation Guide
Release 4.5, Revision 2
Figure 6-13 Remote HPSS Site Configuration Window
To add a new Remote Site, enter the information about the remote HPSS system and click on the
Add button.
ToupdateanexistingRemoteSite,modifythedesiredfieldsandclickontheUpdatebuttontowrite
the changes to the SFS file.
To delete an existing Remote Site, click on the Delete button to delete the policy.
To load an existing policy click on the Load Existing button.
To clear out the fields on the screen in order to add a new Remote Site, click on the Start New
button.
Refertothewindow'shelpfileformoreinformationontheindividualfieldsandthebuttonsaswell
as the supported operations available from the window.
Once a Remote Site is created or updated, it may take several minutes for the Location Server to
noticethechangeandcontact thesite.Tospeedupthisprocess,reinitializeorshutdownandrestart
the Location Server.
Table 6-10 Remote HPSS Site Configuration Fields
Field Description Acceptable Values Default Value
Site ID The unique DCE
UUID which
identifies the remote
HPSS site.
You must obtain this
information from the remote
site’s administrator.
None