Hub/Switch Installation Guide

Chapter 6 HPSS Configuration
HPSS Installation Guide September 2002 263
Release 4.5, Revision 2
6.5.1 Configure the Basic Server Information
A basic server configuration entry can be created using the Basic Server Configuration window.
Aftertheconfiguration entryiscreated,itcan be viewed,updated, ordeletedthroughthiswindow.
From the HPSSHealth and Status window (shownin Figure 6-1), clickon the Admin menu, select
the Configure HPSS option and click on the Servers option. The HPSS Servers window will be
displayed as shown in Figure 6-5.
To configure a new server, clickon theNew Server... buttononthe HPSS Servers window. Ablank
Basic Server Configuration window is displayed along with the server-type popup list. Select the
desired type of server and the Basic Server Configuration window will be filled in as shown in
Figure 6-6 with default values. If the default data is not desired, change the field with the desired
value. Click on the Add button to create the configuration entry.
To update an existing configuration, select the desired server entry on the HPSS Servers window
and click on the Basic... button from the Configuration button group. The Basic Server
Configuration window will be displayed with the configured data. After modifying the
configuration, click on the Update button to write the changes to the appropriate SFS file.
To delete an existing configuration, select the desired server displayed on the HPSS Servers
window and click on the Basic... button from the Configuration button group. The Basic Server
Configuration window will be displayed with the configured data. Verify that the associated
server- specific configuration, if exists, is already deleted then click on the Delete button to delete
the basic configuration entry.
Refertothe window’shelpfile formoreinformationon the individualfields andbuttonsaswell as
the supported operations available from the window.