Technical information

IBM Europe, Middle East, and Africa Hardware
Announcement ZG12-0059
IBM is a registered trademark of International Business Machines Corporation
25
The BladeCenter HS23 is supported in the BladeCenter chassis.
Note: Consult specific chassis announcements for more information on setup and
redundancy.
Cable orders
Each BladeCenter blade contains onboard Ethernet connections. An optional
BladeCenter Ethernet Switch Module must be installed in the BladeCenter to support
external Ethernet connections.
Cabling is not included with the server. Consult the Ethernet Switch module
documentation for external cabling requirements.
Installability
Each BladeCenter HS23 requires approximately 10 minutes for installation.
Installation includes unpacking, setting up, and powering on the system. Additional
time is required to install an operating system, additional options, or features.
Packaging
BladeCenter HS23
Product Package description Boxes
BladeCenter BladeCenter Carton 1
Contents:
BladeCenter HS23 1
Publications/CD Package 1
BladeCenter Publications Package 1
Contents:
Documentation CD-ROM
(softcopy of publications)
Important Notices
Warranty Flyer
The BladeCenter HS23 blades are shipped in a single package. The approximate
shipping dimensions and weight are:
Single pack dimensions: 60.32 x 33.4 x 15.57 cm (23.75 x 13.13 x 6.13 in)
Single pack weight: 4.2 kg (9.2 lb)
Note: Above dimensions and weights refer to a single-wide HS23. Addition of one or
more Expansion Blades increases dimensions and weight.
Security, auditability, and control
Security and auditability features include:
A power-on password function helps provide control of who has access to the
data and server setup program on the server.
A set unattended boot mode allows the system keyboard to be locked to all
entries except the password and at the same time allows other computers on the
network to access the system disk drive.
A selectable boot sequence can be used to help prevent unauthorized installation
of software or removal of data.
The BladeCenter HS23 blades have no security intrusion detection. Therefore, they
should be installed in a rack environment that provides security through lockable