User manual

Chapter 1. Supported hardware 3
򐂰 Sserver pSeries 620 Models 6F0 or 6F1
򐂰 Sserver pSeries 630 Models 6C4 or 6E4
򐂰 Sserver pSeries 640 Model B80
򐂰 Sserver pSeries 650 Model 6M2
򐂰 Sserver pSeries 655 Model 651
򐂰 Sserver pSeries 660 Models 6H0, 6H1 or 6M1
򐂰 Sserver pSeries 670
򐂰 Sserver pSeries 680 Model S85
򐂰 Sserver pSeries 690
At the time of writing, Dassault Systemes AIX 5L support is only for Version 5.1. However, the
support for AIX 5L Version 5.2 is planned for the future.
1.2 Supported hardware for CATIA and ENOVIA
Dassault Systemes supports different processor architectures for RS/6000, IntelliStation
POWER series, and pSeries. These include the PowerPC 604e, POWER2, POWER3, and
POWER4.
Different graphic accelerators are supported along with the workstation hardware, such as the
GXT2000P, GXT3000P, GXT4000P, GXT4500P, GXT6000P, and GXT6500P, to name several.
Refer to the latest program directories of the various CATIA and ENOVIA products for a list of
the hardware requirements. The program directories can be obtained from:
http://techsupport.services.ibm.com/engineering/techknow?expanded=catiacfg#catia
1.3 Supported software levels for CATIA and ENOVIA
Table 1-2 lists a brief overview of the minimum required software levels for CATIA.
Table 1-2 Minimum required software levels for CATIA
Note: With AIX 5L Version 5.2 all RS/6000 models that are Micro Channel or Power
Reference Platform systems are no longer supported.
Hardware AIX level Compiler/runtime
level
Additional PTFs
IntelliStation POWER
275 (9114-275)
workstation
AIX 5L Version 5.1
ML 04 or higher
C Set ++ Runtime for
AIX 5.0 at level 6.0.0.1
XL Fortran Runtime
Environment at 7.1.1.3
IY45738 - Pointer
Markers Disappear In
CATIA
pSeries 630 Model
6E4 (7028-6E4)
workstation
AIX 5L Version 5.1
ML 03 or higher
C Set ++ Runtime for
AIX 5.0 at level 6.0.0.1
XL Fortran Runtime
Environment at 7.1.1.3
IY35110 - Shared Lib
Segment Nearly Full
Can Crash System
IY37937 -
VEOTEXTURE
Application Hangs
When Using Multiple
Textures