User Manual

10 IBM® xSeries 33 0: Installation Guide
d. Push down on the blue adapter retention latch until it clicks into place,
securing the adapter.
e. Replace the expansion slot clip by s liding it down until it latches into place
and holds the adapter securely.
9. Connect the internal cables to the adapter.
Attention: Route cables so that they do not block the flow of air from the fans.
10. If you have other options to install, install them now.
11. Replace the cover on the server; then, reinstall the server in the rack and connect
all external cables. For mo re informa tion on r eplacing the cover, refe r to the Us er’s
Reference on the IBM xSeries Documentation CD.
12. Tu rn on the server.
Working with memory
Your xSeries 330 server supports 128 MB, 256 MB, 512 MB , and 1 GB DIMMs. See the
ServerProven list at http://www.ibm.com/pc/compa t for a lis t of memory modules
for use with your server.
Memory considerations
Before you install memory, review the following:
Install additional DIMMs in the following order: DIMM connector 2, then 3, then 4.
(See the following illustration for memory conn ector locations.)
Note: The illustratio ns in this documen t might differ slightly from your hardware.
SCSI connector
(J4)
Extra cable
length
ServeRAID
adapter card