Server User Manual

ManualsBrandsIBM ManualsNetwork CardAS/400e

ibm.com/redbooks

Redpaper

First

IBM eServer iSeries and

AS/400e System Builder:

IBM OS/400 Version 4 Release 3 - Version 5 Release 2

ITSO Residents

The authoritative source for iSeries and

AS/400e models

Facts and rules for established

AS/400e features

Product numbers, prerequisites,

storage, software at a glance

Summary of content (526 pages)

PAGE 1
First IBM eServer iSeries and AS/400e System Builder: IBM OS/400 Version 4 Release 3 - Version 5 Release 2 The authoritative source for iSeries and AS/400e models Facts and rules for established AS/400e features Product numbers, prerequisites, storage, software at a glance ITSO Residents ibm.
PAGE 2
PAGE 3
International Technical Support Organization IBM eServer iSeries and AS/400e System Builder: IBM OS/400 Version 4 Release 3 - Version 5 Release 2 March 2007
PAGE 4
Note: Before using this information and the product it supports, read the information in “Notices” on page ix. First Edition (March 2007) This edition applies to Version 5 Releases 1 and 2 of OS/400 (product number 5722-SS1), and Version 4 Releases 3, 4, and 5 of OS/400 (product number 5769-SS1). © Copyright International Business Machines Corporation 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007. All rights reserved. Note to U.S.
PAGE 5
Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi The team that wrote this IBM Redpaper . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.6.3 #5064/#9364 system unit expansion with #9330 PCI integrated expansion unit 5.7 9406 Model 730 system unit schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.8 9406 Model 740 system unit with #9251 Base I/O Tower schematic . . . . . . . . . . . . . 5.9 9406 System Unit Expansion Towers for Models 720, 730, and 740 schematics. . . . 5.9.
PAGE 7
servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 9.1 External disk storage for iSeries and AS/400e systems . . . . . . . . . . . . . . . . . . . . . . . 308 9.1.1 9336 and 9337 DASD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308 9.1.2 Disk model identifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 9.1.3 Versatile Storage Server . . . . .
PAGE 8
13.4 Communication cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466 Chapter 14. Summary of IBM AS/400 CISC models . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1 AS/400 Model P02, P03, and 10S capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1.1 Model P02 capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1.2 Model P03 and 10S capacities . . . . . . . . . . . . . . .
PAGE 9
IBM Redbooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Online resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to get IBM Redbooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 10
viii iSeries and AS/400e System Builder
PAGE 11
Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used.
PAGE 12
Trademarks The following terms are trademarks of the International Business Machines Corporation in the United States, other countries, or both: Redbooks (logo) ™ eServer™ iSeries™ i5/OS® pSeries® xSeries® zSeries® Advanced Function Printing™ AFP™ AIX 5L™ AIX® AS/400e™ AS/400® CICS® DataPropagator™ Domino® DB2 OLAP Server™ DB2 Universal Database™ DB2® DS6000™ DS8000™ Electronic Service Agent™ Enterprise Storage Server® ESCON® FlashCopy® FICON® ImagePlus® Infoprint® Intelligent Miner™ IBM® IBMLink™ IPDS™ Lo
PAGE 13
Preface This IBM eServer iSeries and AS/400e System Builder: IBM OS/400 Version 4 Release 3 Version 5 Release 2 IBM® Redpaper offers a comprehensive guide to IBM eServer® iSeries™ and AS/400e™ hardware and associated IBM software. This document offers detailed information about the IBM iSeries Models 250, 270, 820, 830, 840, SB2 and SB3, as well as the IBM AS/400e Models 170, 250 package, 720, 730, and 740.
PAGE 14
The team that wrote this IBM Redpaper Susan Powers is a Consulting I/T Specialist at the International Technical Support Organization (ITSO), Rochester Center. She has been the project manager for the iSeries Handbook and System Builder suite of IBM Redbooks™ since 1997. Her work is made possible through the work of the dedicated team of individuals, some of whom are acknowledged in this preface.
PAGE 15
Become a published author Join us for a two- to six-week residency program! Help write an IBM Redbook that deals with specific products or solutions, while getting hands-on experience with leading-edge technologies. You will team with IBM technical professionals, Business Partners, or clients. Your efforts will help increase product acceptance and client satisfaction. As a bonus, you will develop a network of contacts in IBM development labs, and increase your productivity and marketability.
PAGE 16
xiv iSeries and AS/400e System Builder
PAGE 17
1 Chapter 1. IBM AS/400e 170 models This chapter identifies the features that are associated with each IBM AS/400e 170 server, such as the processor features, power and packaging, main storage, and workstation controllers. It also identifies the related communications—including wide area network (WAN), local area network (LAN), and asynchronous transfer mode (ATM), disk units, internal tape units, and magnetic media controllers.
PAGE 18
1.1 AS/400e Model 170 overview The following tables provide the minimum and maximum capacities for the Model 170. Model 170 (February 1998) Processor feature #2159 #2160 #2164 #2176 #2183 Relative system performance (CPW)1 Client/server environment 75.0 114.0 210.0 319.0 319.0 Interactive environment 16.0 23.0 29.0 39.0 65.
PAGE 19
Disk storage (GB) Minimum internal Maximum internal (V4R2) Maximum internal (V4R3 and later) System I/O card slots Low-speed PCI Low-speed IPCS PCI High-speed DASD IOA PCI High-speed tape IOA PCI High-speed Ethernet or ATM3 Maximum communication lines4 ATM adapters6 Maximum LAN/ATM adapters6 Non-Integrated Server LAN Low-Speed TR/Ethernet Non-Integrated Server LAN 100/10 Ethernet Integrated Server LAN Low-Speed TR/Ethernet Integrated Server LAN 100/10 Ethernet Maximum workstation controllers Twinaxial (only
PAGE 20
1.2 AS/400e Dedicated Server for Domino overview The following table provides the Model 170 Dedicated Server for Domino minimum and maximum capacities.
PAGE 21
1.
PAGE 22
Model 170 Main Storage Riser Card (M02) for Processors #2385, #2386, #2388, #2408, #2409 4b 4b 3b 3b 2b 2b 1b 1b 4a 4a 3a 3a 2a 2a B a s e M e m o ry 1 a B a s e M e m o ry 1 a Notes: 1. DIMMS should be plugged in pairs in a sequential order, without leaving a gap. 2. Base memory cannot be upgraded. 3. When the upper half of the riser card is used (slot b), all DIMMS in those slots must match the corresponding bottom (a) slots (that is, quad).
PAGE 23
9406 Model 170 #7101/#7102 System Expansion Unit Notes: Disk Unit F11 350 Watt Power Supply Disk Unit F12 Disk Unit F13 Disk Unit F14 Disk Unit F15 PCI Cards Disk Unit F16 Low Speed PCI Slot E14 Low Speed PCI Slot E13 Low Speed PCI Slot Low Speed PCI Slot E12 Base Controller E10 Tape Controller #2729/#2718 LAN/ATM Adapter (Note 6) Feat. Controller #2809/#2824 E09 Integrated Server LAN Slot E06 Integrated Server LAN Slot Int.
PAGE 24
PCI Card Cage For #7101 System Expansion Unit #2824/Base CCIN 2824 Slot E14 2-Line WAN IOA #2721/#2745 or Twinaxial IOA #2722 / #2746 E13 2-Line WAN IOA #2721/#2745 or Twinaxial IOA #2722 / #2746 E12 #2721 / #2722 / #2723 / #2724 / #2745 / #2746 E11 #2721 / #2722 / #2723 / #2724 / #2745 / #2746 E10 Base Controller (CCIN 2809) E09 Tape Controller #2729/#2718 E08 High Speed LAN / ATM Adapter (Note 8) E07 Feature Controller Slot #2824 E06 Integrated Server LAN IOA #2723 / #2724 E05 Integrate
PAGE 25
PCI Card Cage for the #7102 System Expansion Unit #2824/Base CCIN 2824 Slot E14 #2721/#2722/#2723/#2724/#2745/#2746 E13 #2721/#2722/#2723/#2724/#2745/#2746 E12 #2721/#2722/#2723/#2724/#2745/#2746 E11 #2721/#2722/#2723/#2724/#2745/#2746 E10 Base Controller (CCIN 2824) E09 #2729/#2718/#2745/#2746/#2750/#2751/#2761/#4800 (Note 9) E08 #2723/#2724/#2745/#2746/#2750/#2751/#2761/#281x/#2838/#4800 (Note 9) E07 Feature Controller Slot #2824 E06 Integrated Server LAN IOA #2723 / #2724 E05 Integrate
PAGE 26
1.4 AS/400e Model 170 processors The AS/400e Model 170 systems are Customer Setup (CSU). 170 Processors #2159 75.0 RSP CPW Processor in Client/Server Environment (Unconstrained), 16.0 RSP CPW Processor in Interactive Environment (Constrained and Unconstrained). Base Memory 64 MB. #2160 114.0 RSP CPW Processor in Client/Server Environment (Unconstrained), 23.0 RSP CPW Processor in Interactive Environment (Constrained and Unconstrained). Base Memory 64 MB. #2164 210.
PAGE 27
1.5 AS/400e Model 170 features This section identifies the supported features for the AS/400e Model 170. PCI cards are subject to plugging rules. See PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for details. Power and packaging #1402 Line cord 9-ft 120 volt Feature #1402 specifies 9 ft (2.8 m), 15 Amp, and 120 volt (U.S. default). The #1402 specify feature provides up to two line cords: one for the system and one for the expansion unit.
PAGE 28
#3004 256 MB Main Storage (DIMM) The #3004 plugs directly into the CPU board or memory riser card depending on the processor feature. Must be added in pairs. Mixing of #3003 and #3004 within pairs (or quads on the #2385, #2386 and #2388 processors when more than eight memory features are installed) is not allowed.
PAGE 29
Base IOP #2720 #9720 Base Controller for #7102 System Expansion Unit One LAN/WAN/Workstation IOP (CCIN 2824) is supplied as standard within the #7102, and is installed in slot E10. It provides support for two high-speed PCI card slots E08 and E09, and two low-speed PCI card slots E13 and E14.
PAGE 30
#2824 #2824 PCI Feature Controller The #2824 PCI Feature Controller for LAN/WAN/Workstation has 32 MB of memory. In the #7101 System Expansion Unit, one #2809 PCI LAN/WAN/Workstation IOP is supplied as standard with no feature required. In the #7102 System Expansion Unit, one #2824 PCI Feature Controller is supplied as standard with no feature required. See “Base IOP” on page 12. It can be installed in slot E07 in the #7101 and #7102 System Expansion Unit.
PAGE 31
#2745 #2745 PCI 2-Line WAN IOA The #2745 supports up to two multiple protocol communications ports when one or two of the following cables are attached: 򐂰 #0348 V.24/EIA232 20-ft. (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft. (15 m) PCI cable 򐂰 #0353 V.35 20ft/6 m PCI cable 򐂰 #0354 V.35 50ft/6 m PCI cable 򐂰 #0355 V.35 80ft/6 m PCI cable 򐂰 #0356 V.36 20ft/6 m PCI cable 򐂰 #0358 V.36 150ft/45 m PCI cable 򐂰 #0359 X.21 20ft/6 m PCI cable 򐂰 #0360 X.21 50ft/15 m PCI cable 򐂰 #0365 V.
PAGE 32
#2761 #2761 Integrated Analog Modem The #2761 Integrated Analog Modem allows the modem function to be integrated into the IOA and supports multiple analog modem ports (eight phone lines). The #2761 runs the following protocols without the need for an external modem: 򐂰 SLIP/PPP uses V.90, so maximum line speed is 56 Kbps. 򐂰 SDLC uses V.34, so maximum line speed is 33.6 Kbps. 򐂰 Fax uses V.17 to achieve a 14.4 Kbps maximum line speed.
PAGE 33
#9745 #9745 Base PCI 2-Line WAN IOA The #9745 two-line communications adapter supports ECS and Client Access Console or Client Access Console. One of the following cables must be specified for ECS: 򐂰 #0348 V.24/EIA232 20-ft. (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft. (15 m) PCI cable 򐂰 #0353 V.35 20-ft/6 m PCI cable 򐂰 #0354 V.35 50-ft/6 m PCI cable 򐂰 #0355 V.35 80-ft/6 m PCI cable 򐂰 #0356 V.36 20-ft/6 m PCI cable 򐂰 #0358 V.36 150-ft/45 m PCI cable 򐂰 #0359 X.21 20-ft/6 m PCI cable 򐂰 #0360 X.
PAGE 34
#2811 #2811 PCI 25 Mbps UTP ATM IOA The #2811 PCI 25 Mbps UTP ATM IOA provides attachment into an ATM network using Unshielded Twisted Pair (UTP) cabling. The #2811 is typically used where 25 Mbps speeds are required over distances of less 100 meters. Technical specifications and industry standards supported are available at the ATM Forum Web site at: http://www.atmforum.com High-speed PCI slots required: One The #2811 is a Customer Install Feature for an MES that only includes CIF features.
PAGE 35
#2838 #9738 #2838/#9738 PCI 100/10 Mbps Ethernet IOA The #2838/#9738 provides attachment to standard 100 Mbps high-speed Ethernet LANs and allows attachment to existing 10 Mbps Ethernet LANs. The #9738 is a base LAN. If a #2838/#9738 PCI 100/10 Mbps Ethernet IOA is selected to run on a #2857 Integrated PC Server or #2866 PCI Integrated Netfinity Server, then one specify #0222 100/10 Mbps Ethernet on IPCS/Integrated Netfinity Server is required. The IOA is capable of operating in half or full duplex mode.
PAGE 36
#2866 #2866 PCI Integrated Netfinity Server The #2866 PCI Integrated Netfinity Server contains a 333 MHz Pentium II Processor, two LAN IOA slots for high performance serving to LAN-attached PCs, and four main storage slots. The four main storage slots can each contain one of the following features, giving a maximum of 1024 MB. No base main store memory is supplied.
PAGE 37
#6831 #6831 1.6 GB Read Cache Device The #6831 provides 1.6 Gb of capacity for large read cache function. It is mutually exclusive with DASD compression. The system arrives in performance mode with the compression function turned off on the disk controller. Mirroring is not supported on the #6831. Prerequisites: #2748 PCI RAID Disk Unit Controller One DASD slot Maximum: One per #2748 PCI RAID Disk Unit Controller Minimum operating system level: OS/400 V4R4 #8813 8.
PAGE 38
#6383 #6383 16 GB ¼-inch Cartridge Tape Unit The #6383 is mounted in the system unit. With a data rate of 1.5 Mbps and capacity of 16 GB per cartridge (3 Mbps and 32 GB per cartridge with data compaction), the #6383 provides a growth path for the large number of iSeries and AS/400e servers that use QIC tape technology for save/restore. The #6383 is controlled by the MFIOP.
PAGE 39
Magnetic media controllers #2718 #2718 PCI Magnetic Media Controller The #2718 is an Ultra SCSI Tape IOA that provides attachment capability for the IBM 7207-122 QIC-SLR Tape Bridge Box. The #2718 can attach one tape drive. Prerequisite: #7101/#7102 System Expansion Unit. Minimum operating system level: OS/400 V4R2 The #2718 is a Customer Install Feature for an MES that only includes CIF features.
PAGE 40
#9728 #9728 Base Disk Unit Controller CCIN 2728 The #9728 is the base IOA for the system unit. Provides Ultra SCSI attachment for up to four disk units, one CD-ROM drive (standard), and one internal tape drive. Does not support RAID. Supports #6381, #6382, #6384, or #6385 tape units. Mutually exclusive with #2740 and #2741. The #9728 does not support integrated hardware disk compression. The #9728 is not required for the #2289, #2290, #2291 and #2292 processors for up to four disk drives.
PAGE 41
2 Chapter 2. IBM iSeries SB2 and SB3 models This chapter identifies the features that are associated with each SB2 and SB3 system, such as the processor features, power and packaging, main storage, workstation controllers, and communications. This includes local area networks (LANs) and asynchronous transfer mode (ATM), disk units, internal tape units, CD-ROM, DVD technology, and magnetic media controllers.
PAGE 42
2.1 iSeries Model SB2 and SB3 overview The following tables provide Model SB2 and SB3 minimum and maximum capacities.
PAGE 43
Note 1 Commercial Processing Workload (CPW) is used to measure the performance of all iSeries and AS/400e processors announced from September 1996 onward. The CPW value is measured on maximum configurations. The type and number of disk devices, the number of workstation controllers, the amount of memory, the system model, other factors, and the application running determine what performance is achievable. Note 2 The total number of tape drives does not increase.
PAGE 44
2.3 iSeries Model SB2 and SB3 processors IBM Service Representatives perform iSeries Models SB2 and SB3 initial installation and model upgrades.
PAGE 45
2.4 iSeries Model SB2 and SB3 features This section identifies the supported features for the iSeries Model SB2 and SB3. PCI cards are subject to plugging rules. See PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for details. Power and packaging #0141 #0141 HSL OptiConnect Specify The #0141 is used to specify that this system is to be part of a cluster using HSL OptiConnect.
PAGE 46
#0551 (cont.) #0551 iSeries Rack The following PDUs are available: 򐂰 #5160 Power Distribution Unit 1 Phase NEMA The following line cords are supported on the #5160 for connection to utility power: – – – – – – – #1424 - 200V 6-ft Locking Line Cord #1425 - 200V 6-ft Watertight Line Cord #1426 - 200V 14-ft Locking Line Cord #1427 - 200V 14-ft Watertight Line Cord #1446 - 4.3 m 200V/30A Power Cord Korea #1447 - 4.3 m 200V/30A Power Cord AU #1448 - 4.
PAGE 47
#5077 #5077 Migration Tower II The #5077 is an I/O tower that supports two SPD I/O cards. The #5077 can be ordered to support clustering on the Models SB2 and SB3. In this case, the #5077 is shipped as a new tower and is supplied with a base optical link card (CCIN 2696) and base CD-ROM. One or two #2695 Optical Bus Adapters can be ordered for the #5077. Up to two SPD cards can be ordered. The #5077 supports up to thee internal tape or CD devices.
PAGE 48
#9074 #9074 Base I/O Tower The #9074 is the “base” I/O tower shipped on the Model SB2. The #9074 supports up to four disk units, when installed in the SB2, up to two removable media units, one battery backup, and redundant or hot swap power supplies. The #9074 has a #9943 Base PCI IOP and a #9748 Base PCI RAID Disk Unit Controller. The 11 PCI input/output adapters (IOAs) are supported (driven) by the base #9943 Base PCI IOP and by #2843 PCI IOPs.
PAGE 49
Main storage There are no memory features on Models SB2 and SB3. PCI IOP controllers PCI Rules PCI cards are subject to plugging rules. PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 describes the configuration and card placement rules that you must understand and follow to develop valid configurations. Use these IBM Redpapers as guides when configuring IOAs and input/output processors (IOPs) so that the system is sized to meet client expectations. Refer to 7.
PAGE 50
#2790 #2791 #2799 (cont.) #2790 PCI Integrated Netfinity Server or #2791/#2799 PCI Integrated xSeries Server The #2790, #2791, and #2799 do not require a #2843 or #9943. However, placement is limited to specific slots within the specific system tower and expansion tower. The #2790, #2791, and #2799 support only the Windows NT, Windows 2000 and Windows Server® 2003 operating systems. The Windows 2003 Server operating system is supported at OS/400 V5R2 with PTFs.
PAGE 51
#2843 #9943 #2843 #9943 #2843 PCI IOP The #2843/#9943 is a PCI I/O processor with 64 MB of memory that drives PCI IOA adapters on Models SB2 and SB3. The #2843 can drive up to four IOAs.
PAGE 52
#2844 #2844 PCI IOP The #2844 PCI IOP is a PCI I/O processor, which drives PCI IOA adapters in the iSeries system units and their expansion towers, #0578/#5078 PCI Expansion Unit, #0588/#5088 PCI Expansion Unit, #0595/#5095 PCI-X Expansion Tower, #5074/#5079 PCI Expansion Tower, #5075 PCI Expansion Tower, #5078 PCI Expansion Unit, #5094 PCI-X Expansion Tower, #5294 1.8m I/O Tower, #8079 Optional Base 1.8 M I/O Rack, and #8094 Optional 1.8 M I/O Rack.
PAGE 53
#4710 #4710 PCI Integrated xSeries Server The #4710 PCI Integrated xSeries Server has a 2 GHz processor and four memory slots. Each server memory slot can contain one of the following features, providing a total main storage capacity from 1024 MB to 4096 MB. The feature numbers of the server memory cards are: 򐂰 #0426 - 512 MB Server Memory 򐂰 #0427 - 1 GB Server Memory A minimum of two server memory cards are required and must be installed in identical capacity pairs.
PAGE 54
#5546 #5546 System Console on 100 Mbps Token Ring A system console specify code had to be selected on each order. When the #5546 is on the order, the system console is LAN attached to a #2744 PCI 100 Mbps Token Ring IOA. The #2744 must be dedicated to the LAN console and cannot be used for any other purpose. Corequisite: One #0367 Operations Console PCI Cable on the order or present on the system.
PAGE 55
#2743 #2743 1 Gbps PCI Ethernet IOA The #2743 PCI 1 Gbps Ethernet IOA feature allows the iSeries server to attach to IEEE standard 802.3Z high speed Ethernet LANs (1 Gbps). It can also be used to connect to existing 100 Mbps Ethernet LANs using switches with 10/100/1000 Mbps ports. The adapter supports multi-mode fiber media attachment to client-supplied cabling.
PAGE 56
#2772 #2772 PCI Dual WAN/Modem IOA The #2772 is a 2-line WAN adapter with two ports (RJ11) with internal modems. Telephone cable is used to connect to the ports. This is the non-Complex Impedance Matching (CIM) version of the IOA. Supported protocols are: 򐂰 V.90 56K Async PPP 򐂰 Fax applications at data rates up to 14.4K Corequisite: Country- or region-specific telephone cables must be ordered. A minimum of one modem cable and a maximum of two must be selected for each #2772.
PAGE 57
#2793 #9793 #2793 2-line WAN IOA with Modem The #2793/#9793 is a 2-line WAN with Modem adapter and is the non-CIM version that is offered in all countries or regions except Australia and New Zealand. Port 0 is the modem port and supports V.92 56K Async PPP, V.92 data modem, V.44 data compression, and V.34 Fax modem and Fax functions such as ECM and 2D/1D conversion. Port 0 does not provide sync modem capabilities (SDLC and Sync PPP). Port 1 is the RVX port and supports multiple communications protocols.
PAGE 58
#2794 #9794 #2794 2-line WAN IOA with Modem The #2794/#9794 is a 2-line WAN with Modem adapter and is the CIM version, which is offered only in Australia and New Zealand. Port 0 is the modem port and supports V.92 56K Async PPP, V.92 data modem, V.44 data compression, and V.34 Fax modem and Fax functions such as ECM and 2D/1D conversion. Port 0 does not provide sync modem capabilities (SDLC and Sync PPP). Port 1 is the RVX port and supports multiple communications protocols.
PAGE 59
#2805 #2805 PCI Quad Modem IOA The #2805 is a 4-line WAN adapter with four WAN ports with internal modems. Telephone cable (RJ-11) is used to connect to the ports. This is the non-CIM version of the IOA. The supported protocols are: 򐂰 V.92 56K Async PPP 򐂰 Fax applications at data rates up to 33.6K The V.92 functions offer increased upload throughput, improved V.44 data compression, and shortened modem synchronization periods. Corequisite: Country- or region specific telephone cables must be ordered.
PAGE 60
#2817 #2817 PCI 155 Mbps MMF ATM IOA The #2817 is a 155 Mbps ATM PCI card that allows the server to be attached to an ATM network using the Multi- Mode Fiber (MMF) 62.5 micron interface. This interface is intended for connection to both local area switches and direct connection to service provider equipment. The #2817 is used typically where 155 Mbps speeds are required over distances of less than 2 km.
PAGE 61
#4750 #4750 PCI ISDN BRI U IOA The #4750 is a four-port (eight channel) ISDN BRI (basic rate) full sized PCI card. Each port consists of 2B+D configuration. The #4750 is the “U”-bus (2-wire) version of the ISDN BRI PCI card. The #4750 supports the following protocols: 򐂰 SLIP/PPP 򐂰 IDLC 򐂰 Fax Four 30-ft (9.3 m) RJ-45 to RJ-45 network cables are shipped with each #4750. This counts as eight lines toward the system communication maximums. Requires long PCI card slot.
PAGE 62
#4801 #4801 PCI Cryptographic Coprocessor The #4801 is a hardware cryptography solution. The #4801 is a half-length PC form-factor PCI card that offers a rich cryptography function, secure storage of cryptographic keys, and 12 Mbps performance (at the card level) for bulk data encryption and triple DES capability. Select the #4801 PCI Cryptographic Coprocessor for applications requiring a FIPS 140-1 certified, tamper-resistant module for storing cryptographic keys or for financial PIN processing.
PAGE 63
#4818 #4818 PCI ATM 155 Mbps SMF OC3 The #4818 is a 155 Mbps ATM PCI card that allows the iSeries or AS/400e server to be attached into an ATM network using the Single-Mode Fiber (SMF) 9 micron interface. This interface is intended primarily for direct connection to service provider equipment. The #4818 is used typically where 155 Mbps speeds are required over distances of from 16 to 40 km. Technical specifications and industry standards supported are available at the ATM Forum Web site at: http://www.
PAGE 64
#5701 #5701 PCI 1 Gbps Ethernet UTP IOA The #5701 PCI 1 Gbps Ethernet UTP IOA allows an iSeries server to attach to IEEE standard 802.3Z high-speed (1 Gbps) Ethernet LANs. It can also be used to connect to existing 10 Mbps or 100 Mbps Ethernet LANs by using switches with 10, 100, or 1000 Mbps ports. It cannot directly attach to 10 Mbps or 100 Mbps LANs. The adapter supports a UTP CAT 5 media interface. Cross over cables are not supported. The #5701 can be run under a #2792 PCI Integrated xSeries Server.
PAGE 65
#9771 #9771 Base PCI 2-line WAN with integrated modem The #9771 is a 2-line WAN adapter. One port supports V.90 56K async data on PPP by way of an internal modem. The second port supports multiple protocol communications (WAN). Connection to the V.90 port uses a telephone cable. Connection to the WAN communication port is with one of the following cables: 򐂰 #0348 V.24/EIA232 20-ft (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft (15 m) PCI cable 򐂰 #0353 V.35 20-ft PCI cable 򐂰 #0354 V.35 50-ft PCI cable 򐂰 #0356 V.
PAGE 66
#4317 #4317 8.58 GB 10k RPM Disk Unit (Ultra2 SCSI) The #4317 provides an additional 3 ½-inch single disk unit with 8.58 GB capacity. Maximum: Four on SB2; six on SB3 #2316; eight on SB3 #2618 Minimum operating system level: OS/400 V4R4 The #4317 is a Customer Install Feature. The #4317 was withdrawn from marketing on 03 December 2002 for new orders. Feature conversions to #4317 remain available. #4318 #4318 17.
PAGE 67
#4482 #4482 4 GB ¼-inch Cartridge Tape Device The #4482 4 GB ¼-inch Cartridge Tape Device is a 4 GB ¼-inch cartridge tape unit that can be mounted in the system unit. The #4482 can be used for save/restore, alternate IPL, program distribution, migration, and ¼-inch cartridge tape exchange using the appropriate media and density. This tape unit is not compatible with System/36 ¼-inch cartridge tape units. Refer to 9.
PAGE 68
#4684 #4684 30 GB ¼-inch Cartridge Tape Device The #4684 30 GB ¼-inch Cartridge Tape Device can be mounted in a removable media device slot of a system unit or an expansion tower. The #4684 can be used for save/restore, alternate IPL, program distribution, migration, and ¼-inch cartridge tape exchange. Refer to 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for additional characteristics.
PAGE 69
#2749 #2749 PCI Ultra Magnetic Media Controller The #2749 is an Ultra SCSI IOA that provides attachment capability for external tape devices and external optical devices. The #2749 can attach one tape drive or one optical drive.
PAGE 70
#2765 #2765 PCI Fibre Channel Tape Controller The #2765 provides Fibre Channel attachment capability for external tape devices. The #2765 supports point-to-point and arbitrated loop topologies and has an LC type cable connector. Each #2765 is shipped with a wrap connector (P/N 05N6767).
PAGE 71
#5702 #5702 PCI-X Ultra Tape Controller The #5702 PCI-X Ultra Tape Controller provides a SCSI Ultra PCI attachment capability for external tape devices, and removable media devices. The #5702 has two ports that can attach two external tape devices.
PAGE 72
#9778 #9778 Base PCI RAID Disk Unit Controller–104 MB Cache The #9778 is an Ultra2 SCSI controller with a 104 MB write-cache that provides RAID-5 protection and compression for internal disk units and supports internal tape units and CD-ROM units. The #9778 supports both compression and non-compression modes. The mode of operation is determined by a hardware jumper. The #9778 is shipped in non-compression mode. By moving the hardware jumper, the controller functions in compression mode.
PAGE 73
3 Chapter 3. IBM iSeries and AS/400e 250 models and packages This chapter identifies the features that are associated with each IBM iSeries and IBM AS/400 250 server, such as the processor features, power and packaging, main storage, and workstation controllers. It also identifies the related communications—including wide area network (WAN), local area network (LAN), and asynchronous transfer mode (ATM), disk units, internal tape units and CD-ROM, and magnetic media controllers.
PAGE 74
3.1 AS/400e Model 250 overview The following table provides the minimum and maximum capacities for the Model 250.
PAGE 75
3.2 iSeries Model 250 package overview The following table provides the minimum and maximum capacities for the Model 250 Package configurations.
PAGE 76
Note 4 Package configuration reflects system as shipped from IBM. No modification of the hardware configuration is allowed on a new order. Optional features can be added through IBM Business Partners after system installation. Note 5 Package configuration includes two drives shipped with Disk Level Mirroring active. Minimum internal disk storage refers to available disk with mirroring active. Maximum internal disk storage refers to unprotected disk capacity.
PAGE 77
Notes: 1. No high-speed LAN is allowed in slot C09. 2. If any LAN is in slot C03, no LAN card is allowed in slot C09. 3. A maximum of three LAN cards is allowed on the MFIOP (including Integrated Server slots C05 and C06). 4. Communications cards #2750, #2751, and #2761 are only allowed in high-speed slot C03. The #2750, #2751, and #2761 are not supported after OS/400 V5R2. 5. The processors include an embedded #9728 Base Disk Unit Controller (CCIN 9728). A separate #9728 is not needed. 6.
PAGE 78
Notes: 1. A maximum of one high-speed LAN or ATM or a maximum of two low-speed LANs is allowed per controller. 2. If an Integrated Server is in slots E02/E04, E03 must remain empty. 3. A maximum of one LAN in E11 or E12 with Integrated Server in E02/E04 is allowed. 4. The disk units in the expansion unit are controlled by the #2763 or #2748 PCI RAID Disk Unit Controller in the system unit. 5. The #2750, #2751, and #2761 communications cards are allowed in slots E03, E08, and E09 (maximum one per IOP).
PAGE 79
3.5 iSeries and AS/400e Model 250 overview The following table provides the minimum and maximum capacities for the Model 250 Package configurations. PCI cards are subject to plugging rules. See PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for details. Power and packaging #1402 Line cord 9-ft 120 volt The #1402 specifies a 9-ft (2.8 m), 15 Amp, and 120 volt (U.S. default). The #1402 specify feature provides one line cord.
PAGE 80
Workstation controllers Base MFIOP Base IOP Base Multifunction IOP The MFIOP (CCIN 6757) and the processor are combined together on the planar board. It also includes the embedded Base Disk Unit Controller CCIN 9728. A separate #9728 Base Disk Unit Controller is not required. The MFIOP drives two low-speed slots C08 and C09 and two high-speed PCI slots C03 and C07. 򐂰 Slot C07 supports disk drive controllers #2763 or #2748 when there are more than four disk drives, or RAID-5 is required.
PAGE 81
#2824 #2824 PCI Feature Controller The #2824 PCI Feature Controller for LAN/WAN/Workstation has 32 MB of memory. In the #7102 System Expansion Unit, one Base Controller (CCIN 2824) is supplied as standard with no feature required. See “Base IOP” on page 64. It can be installed in slot E07 in the #7102 System Expansion Unit. The #2824 PCI Feature Controller provides support for two low-speed PCI card slots E11 and E12, and one high-speed PCI card slot E03.
PAGE 82
#2750 #2750 PCI ISDN BRI U Adapter (available in the United States and Canada only) The #2750 PCI ISDN BRI U Adapter is a 4-port (8-channel) ISDN BRI (basic rate) full-sized PCI card. Each port consists of 2B+D configuration. The #2750 is the “U”-bus (2-wire) version of the ISDN BRI PCI card. The #2750 feature supports the following protocols: 򐂰 PPP (communicates with remote analog modems (V.90) as well as with remote ISDN devices) 򐂰 IDLC 򐂰 Fax Four 30-ft (9.
PAGE 83
#4801 #4801 PCI Cryptographic Coprocessor The #4801 is a hardware cryptography solution. The #4801 is a half-length PC form-factor PCI card that offers rich cryptography function, secure storage of cryptographic keys, and 12 Mbps performance (at the card level) for bulk data encryption. The level of cryptographic function is determined by the Cryptographic Access Provider Licensed Program, which is downloaded to the adapter.
PAGE 84
LANs and ATM Comm. Restrictions See “Comm. Restrictions” on page 103, for communications rules and restrictions. #2723 #9723 #2723 PCI Ethernet IOA The #2723 provides a single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network. Consists of an adapter card and internal code that supplies Ethernet Version 2 and IEEE 802.3 Media Access Control (MAC), plus IEEE 802.2 Logical Link Control (LLC) functions.
PAGE 85
#2818 #2818 PCI 155 Mbps SMF OC3 ATM IOA The #2818 PCI 155 Mbps SMF OC3 ATM IOA provides attachment into an ATM network using the Single Mode Fibre (SMF) 9 micron interface. This interface is intended primarily for direct connection to service provider equipment, but can be used for local area switches. You can find technical specifications and industry standards supported on the ATM Forum Web site at: http://www.atmforum.
PAGE 86
Disk units #6813 #6813 8.58 GB Additional Two-byte Disk Unit (Ultra SCSI) The #6813 provides a 3 ½-inch single disk unit with 8.58 GB capacity for an additional disk unit (7200 RPM). The #6813 is a Customer Install Feature. #6817 #6817 8.58 GB 10k RPM Disk Unit (2-byte) (Ultra SCSI) The #6817 provides a 3 ½-inch single disk unit with 8.58 GB of high-performance (10k RPM) capacity. The #6817 is a Customer Install Feature. #6818 #6818 17.
PAGE 87
#6383 #6383 16 GB ¼-inch Cartridge Tape Unit The #6383 is mounted in the system unit. With a data rate of 1.5 Mbps and capacity of 16 GB per cartridge (3 Mbps and 32 GB per cartridge with data compaction), the #6383 provides a growth path for iSeries or AS/400e models that use QIC tape technology for save/restore. The #6383 is controlled by the MFIOP.
PAGE 88
#2729 #2729 PCI Magnetic Media Controller The #2729 provides SCSI attachment for one 3490E C11/C22/C1A/C2A with feature #5040, 3590 Exx/Bxx, 3490E Exx, 3490E Fxx, 3494 D1x or L1x, 3570, 3590, 7208, 9348 or 9427 Tape Subsystem models or 3995 Optical Library Dataserver (C4x). Prerequisite: #7102 System Expansion Unit High-speed PCI slots required: One Maximum: Two The #2729 is a Customer Install Feature.
PAGE 89
3.6 Supported upgrades for the Model 250 All upgrades to, from, and within the 250 systems are withdrawn from marketing. Refer to the Upgrade topic in the Find and Compare Tool (FACT) at the following Web site to determine the supported upgrade paths for a given processor: http://www-919.ibm.com/servers/eserver/fact/ Chapter 3.
PAGE 90
74 iSeries and AS/400e System Builder
PAGE 91
4 Chapter 4. IBM iSeries 270 models This chapter identifies the features that are associated with each IBM iSeries 270 server, such as the processor features, power and packaging, main storage, workstation controllers, and communications—including wide area network (WAN), local area network (LAN), and asynchronous transfer mode (ATM), disk units, internal tape units and CD-ROM, and magnetic media controllers.
PAGE 92
4.1 iSeries Model 270 overview The following tables provide the minimum and maximum capacities for the Model 270.
PAGE 93
The following tables provide the minimum and maximum capacities for Model 270 Dedicated Server for Domino.
PAGE 94
Summary Base system Disk storage (GB) Integrated minimum Integrated maximum External maximum Total maximum DASD arms maximum Internal arms External LUNs Physical packaging External HSL ports External HSL loops #5075 PCI Expansion Tower #5095 PCI-X Expansion Tower #5074 PCI Expansion Tower External IBM eServer xSeries Servers Embedded IOP PCI card slots Maximum PCI IOA cards Communication lines4 LAN ports Integrated xSeries Servers7 Twinaxial workstation controllers Twinaxial workstations Internal CD-ROM/D
PAGE 95
Note 5 5250 CPW (Interactive) is an approximate value that reflects the amount of Processor CPW that can be used for workloads performing 5250-based tasks. 򐂰 Task that use a 5250 data stream are considered 5250 online transaction processing (OLTP) work and require some amount of 5250 CPW to process regardless of how the task was started. 򐂰 Tasks submitted through a 5250 session (5250 device, 5250 emulation) that do display or printer I/O require 5250 CPW.
PAGE 96
4.2 9406 Model 270 system unit schematic Multi-Adapter Bridge Bus Number PCI C07 C06 C05 C04 # PCI Cards 1 Embedded IOP 2 2-Line WAN w/Modem short 4 Console short 5 IOP/IOA 6 IOP/IOA/Int. xSeries Svr. PCI PCI DISK IOA C03 C02 C01 7 IOP/IOA 8 IOA 3 DISK IOA PCI PCI Short PCI Short PCI EMBED Tape/CD CD/DVD OP Panel OP Panel Fan B02 Fan B02 Fan B01 Fan B01 (C07 is Short if Int. xSeries Svr.
PAGE 97
Model 270 Processor and Memory #2248, #2250, #2422 DIMM CONN - J0A DIMM CONN - J0B DIMM CONN - J0C DIMM CONN - J0D Processor w/o Cache SMI A C E G SMI DIMM CONN - J1D H DIMM CONN - J1C SMI Processor M01 CPU Memory Riser Card D B DIMM CONN - J0A DIMM CONN - J0B DIMM CONN - J0C DIMM CONN - J0D #2252, #2423 Regulator F DIMM CONN - J1B DIMM CONN - J1A Processor Regulator or A C E G SMI DIMM CONN - J1D H DIMM CONN - J1C DIMM CONN - J1B DIMM CONN - J1A F D B Memory Riser Card DIMM CONN -
PAGE 98
Model 270 #7104 System Unit Expansion DASD Sidecar D20 D19 D18 D17 D16 D15 Disk Unit Cage Fan B03 #7123 Fan B03 DISK SLOTS D14 D13 D12 D11 D10 D09 Disk Unit Cage 625W 625W Power Supply Power Supply PO2 PO2 DISK SLOTS Front Back Right #5075 PCI Expansion Tower Multi-Adapter Bridge Bus Number OP Panel OP Panel Fan #5156 B02 Fan #5156 B02 Fan B01 Fan B01 # 7,8 Multi5,6 Adapter 3,4 Bridge Boundary 1,2 PCI Cards IOA Short 1 IOP/IOA IOP/IOA 1 IOP/IOA/Int. xSeries Svr.
PAGE 99
#5094 PCI Expansion Tower Note: The total number of disk bays is 45. FAN B01 DB1 DB2 #5108 DISK SLOTS DISK SLOTS Note: All slots are 3.
PAGE 100
#5095/#0595 PCI-X Expansion Tower D06 DASD D09 DASD D10 DASD D11 DASD D12 7,8 C08 5,6 C07 3,4 C06 #9886 / #9887 1,2 C05 IOP/IOA 7,8 C04 5,6 C03 IOP/IOA IOP/IXS (#9844) 3,4 C02 1,2 C01 IOA B04 D08 Fan DASD IOA IOP/IOA IOP/IOA Fan D07 DB2 DASD MAB 0 DASD B03 D05 Fan DASD NB1 D04 MAB 1 D03 DASD Front B02 D02 CB1 D01 B01 DASD Op Panel DASD Fan DB1 DASD Power Supply P01 Power Supply P02 #5138 Right (when stand-alone) Top (when rack mounted) 4.
PAGE 101
#2252 950 CPW Uni-Processor in Client/Server Environment 򐂰 Includes eight DIMM memory positions (plug directly into the processor – direct attach). Optional priced #2884 Main Storage Expansion Riser Card is available that supports 16 DIMM memory positions. The client can select direct attach or purchase a memory riser feature, but cannot use both.
PAGE 102
#2432 1070 CPW Uni-Processor in Client/Server Environment 򐂰 Includes 2 MB L2 Cache 򐂰 Includes eight DIMM memory positions (plug directly into the backplane – direct attach) 򐂰 Includes 32 MB embedded base IOP (CCIN 286C) 򐂰 Includes Common Service Processor (CSP) (CCIN 25B9) Minimum operating system level: OS/400 V5R1 #1516 Optional 0 CPW in Interactive Environment The #2432-1516 is represented by Processor Feature Code 23F0.
PAGE 103
4.4 iSeries Model 270 features This section identifies the supported features for the iSeries Model 270. PCI cards are subject to plugging rules. See PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for details. Power and packaging #0006 #0006 LPAR Restrict Build Process The #0006 is added to an initial order where #0140 Logical Partitioning Specify is requested. This #0006 instructs manufacturing to only load SLIC on the minimum number of disk drives.
PAGE 104
#0133 #0133 Plant Install in Rack The #0133 Plant Install in Rack feature is used to mount a Model 270 system unit in a #0551 iSeries Rack either in the plant or in the field. If the system order received at the plant contains (all four of the following) a system unit, #7104 System Unit Expansion, #0551 rack and #0133, the system is mounted in the #0551 at the plant. If any of those four components are missing from the order, the system is not mounted in the #0551 at the plant.
PAGE 105
#0142 Linux Partition Specify The #0142 is used to specify that this system is to be logically partitioned with a Linux partition. Specify one #0142 for each Linux partition required. Only Linux direct attached features are allowed within a Linux partition. There are no minimum number of Linux direct attached features required per Linux partition. A Linux partition can exist without any Linux direct attached features in it (in this case, all I/O is virtualized by way of the iSeries server).
PAGE 106
#0299 #0299 MES Conversion Analysis for #5580/5581 MES The #0299 provides additional ordering/scheduling steps for Customers adding Auxiliary Write Cache IOA to existing large cache disk controllers (converting #2757, #2780, to #5580, #5581). The marketing configurator adds no-charge #0299 feature to order to indicate a conversion. Automated tool analyzes current MRPD configuration to determine if simple MES or potentially more complex MES.
PAGE 107
#0551 #0551 iSeries Rack The #0551 iSeries Rack provides an empty 1.8 m rack which contains 36 EIA units of space. The following features specify the means of populating the #0551: 򐂰 򐂰 򐂰 򐂰 򐂰 򐂰 #0121 Lower Unit in Rack Specify #0122 Upper Unit in Rack Specify #0127 - 270 Field Install in Rack #0133 Plant Install in Rack #0137 Field Install in Rack #0595 PCI-X Expansion Unit in Rack For complete placement information, refer to “#0551 iSeries Rack” on page 228.
PAGE 108
#5094 #5094 PCI-X Expansion Tower The #5094 PCI-X Expansion Tower is a PCI expansion tower which provides I/O capability for iSeries servers. The #5094 has 15 disk unit slots, with an additional 30 slots available with the #5108 30-Disk Expansion Feature. The #5094 has two removable media slots and 14 PCI-X IOP/IOA card slots. A #9844 Base PCI IOP is included as base and needs to be listed on an initial order for a #5094 PCI-X Expansion Tower.
PAGE 109
#0595 PCI-X Tower Unit in Rack The #0595 PCI-X Tower Unit in Rack is a 5 EIA high racked version of the #5095 PCI-X Expansion Tower which provides I/O capability for iSeries systems. The #0595 has identical functional capabilities to the #5095. The #0595 has seven PCI-X IOP/IOA slots. The #0595 also supports up to 12 disk units. A #9844 Base PCI IOP is included as “base” and should be on an initial order #0595. The #0595 includes a bus adapter to provide the HSL-2 interface to the system.
PAGE 110
#5075 (cont.) #5075 PCI Expansion Tower Select one of the following SPCN cables per tower: 򐂰 #1463 - 2m SPCN Cable 򐂰 #1464 - 6m SPCN Cable 򐂰 #1465 - 15m SPCN Cable 򐂰 #1466 - 30m SPCN Cable One #14xx power cord must be specified (geography dependent). Maximum: One #5075 PCI Expansion Tower or one #5095 PCI-X Expansion Tower The #5075 is a Customer Install Feature. The #5075 was withdrawn from marketing on 21 November 2003.
PAGE 111
#5294 #5294 1.8 m I/O Tower The #5294 1.8 m I/O Tower has space for 90 disk units, has 28 PCI-X IOP/IOA slots, and has four removable media bays. The #5294 is equivalent to two #5094 PCI-X Expansion Towers, with covers and casters removed and positioned in a 1.8 m rack. It includes two bus adapters to provide the HSL interface to the system.
PAGE 112
Main storage Base There is no base memory on the 270 models. Model 270 Main Memory Rules Processors #2248, #2250, #2252, #2253, #2422, #2423, and #2424 All main storage cards must be added in pairs when attached directly to the Processor or quads when attached to the #2884 Main Storage Expansion Riser Card. The pair or quad set must be of the same feature code.
PAGE 113
#3024 256 MB Main Storage (DIMM, 128 Mb technology, unstacked) Supported on the #2248, #2250, #2252, #2253, #2422, #2423, #2424, #2434, and #2454 processors Refer to “Model 270 Main Memory Rules” on page 96 for memory restrictions. The #3024 is a Customer Install Feature. The #3024 was withdrawn from marketing on 01 June 2006.
PAGE 114
PCI IOP controllers PCI Rules PCI cards are subject to plugging rules. PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 describes the configuration and card placement rules that you must understand and follow to develop valid configurations. Use these IBM Redpapers as guides when configuring IOAs and input/output processors (IOPs) so that the system is sized to meet client expectations. Refer to Chapter 7.
PAGE 115
#2844 #2844 PCI IOP The #2844 PCI IOP is a PCI I/O processor which drives PCI IOA adapters in the Model 270 system unit, and the #5075 and #0595/#5095 PCI-X Expansion Tower.
PAGE 116
#2890 #2891 #2899 (cont.) #2890 PCI Integrated Netfinity Server, #2891 PCI Integrated xSeries Server, #2899 PCI Integrated xSeries Server The #2890, #2891, or #2899 can support PCI 100/16/4 Mbps Token Ring IOAs, PCI 100/10 Mbps Ethernet IOAs, or PCI 1 Gbps Ethernet IOAs in any combination. A minimum of one LAN IOA is required.
PAGE 117
#2892 (cont.) #2892 PCI Integrated xSeries One #0223 100 Mbps Token-Ring Specify is required for each #2744 selected to run on the #2892. One #0226 1 Gbps Ethernet Specify is required for each #5700 or #5701 selected to run on the #2892. The #2892 PCI Integrated xSeries Server does not require a #2843, #2844, #9943 or #9944 IOP, but placement is limited to specific slots within the various system towers and expansion towers.
PAGE 118
#4810 (cont.) #4810 PCI Integrated xSeries Server The #4810 requires two PCI card slots. Does not hang over a third slot. The #4810 ships with a standard keyboard/mouse splitter cable and can support either standard or USB 1.1 keyboard, mouse, or both. The #4810 supports only Windows 2000 Server and Windows 2003 Server operating systems. The following rules apply: 򐂰 #0325 (IPCS Extension Cable for Windows) is the default (but can be removed).
PAGE 119
LAN and WAN adapters Comm. Restrictions apply when using specific adapters and I/O processors. Basic communications restrictions when using the Restrictions MFIOP, #2629, #2699, #2720, #2721, #2745, #2809, #2824, and other communications functions are identified here. This information is a brief summary. 򐂰 Maximum protocol speeds on the EIA-232/ITU V.24 electrical interfaces: – 64 Kbps for Synchronous PPP, BSC, SDLC, and X.25 – 115.
PAGE 120
򐂰 Comm. Restrictions 򐂰 (cont.) 򐂰 Not allowed on the #2720/#9720 if this combination of adapters is installed on the base MFIOP: – #2722 or #2746 plus one #2723 or #2724 No more than seven #2629s can be placed into each #5072 1063 Mbps System Unit Expansion Tower. Bisync is always limited to a maximum of 64 Kbps. Additional restrictions include: 򐂰 V.25 autocall cable is not supported. 򐂰 Select standby mode is not supported. 򐂰 #2750, #2751, #2761, #4750, #4751, #4761 are not supported after OS/400 V5R2.
PAGE 121
#2743 #2743 1 Gbps PCI Ethernet IOA The #2743 PCI 1 Gbps Ethernet IOA feature allows the iSeries server to attach to IEEE standard 802.3Z high speed Ethernet LANs (1 Gbps). It can also be used to connect to existing 100 Mbps Ethernet LANs using switches with 10/100/1000 Mbps ports. The adapter supports multimode fiber media attachment to client-supplied cabling. The multi-mode interface has a 62.5/125 micron or 50.0/125 micron cable requirement with an SC connector.
PAGE 122
#2760 #2760 PCI 1 Gbps Ethernet UTP Adapter The #2760 PCI 1 Gbps Ethernet UTP Adapter feature allows the iSeries server to attach to IEEE standard 802.3Z high-speed Ethernet LANs (1 Gbps) using a UTP CAT 5 media interface. The #2760 can directly attach to 10 Mbps or 100 Mbps networks. The #2760 is supported as a LAN adapter for the #2890/#2891.
PAGE 123
#2773 #2773 PCI Dual WAN/Modem IOA The #2773 is a 2-line WAN adapter with two ports (RJ11) with internal modems. Telephone cable is used to connect to the ports. This is the CIM version of the IOA. Supported protocols are: 򐂰 V.90 56K Async PPP 򐂰 Fax applications at data rates up to 14.4K Corequisite: Country- or region-specific telephone cables must be ordered. A minimum of one modem cable and a maximum of two must be selected for each #2773. All modem cables on a system must be the same feature number.
PAGE 124
#2793 #9793 (cont.) #2793 2-Line WAN IOA with Modem The #0367 cable ships with a 25-pin to 9-pin adapter. Multiple #0367 cables can be ordered (but only one per #2793) to serve as consoles for secondary partitions when logical partitioning (#0140) is specified. ECS is supported from the RVX port and one of the following cables is required to support ECS: #0348, #0349, or #0365. ECS is supported from the Modem (V.92) port. The #9793 supports the #5544 System Console on Operations Console on the V.
PAGE 125
#2805 #2806 #2806/#2805 PCI Quad Modem IOA The #2805/#2806 is a WAN modem adapter with four ports (RJ11). Telephone cable is used to connect to the ports. The #2806 is the CIM version of the IOA, while the #2805 is non-CIM. The supported protocols are: 򐂰 V. 92 56 K Async SLIP/PPP 򐂰 V.34 Fax applications at data rates up to 33.6K A minimum of one modem cable must be ordered for each #2805/#2806 and are country- or region-specific. All modem cables on a system must be the same feature number.
PAGE 126
#4723 #4723 PCI 10 Mbps Ethernet Adapter The #4723 PCI 10 Mbps Ethernet Adapter provides single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network. The #4723 consists of an adapter card and internal code, which supplies Ethernet version 2 and IEEE 802.3 MAC plus IEEE 802.2 LLC functions. The Ethernet/IEEE 802.3 IOA is capable of operating in half or full duplex mode. The #4723 has an RJ-45 connector and a 15-pin D-Shell connector for attachment to client-supplied cabling.
PAGE 127
#4751 #4751 PCI ISDN BRI S/T IOA The #4751 is a four-port (eight channel) ISDN BRI (basic rate) full sized PCI card. Each port consists of 2B+D configuration. The #4751 is the “S/T”-bus (four wire) version of the #4750 PCI ISDN BRI U IOA . The #4751 requires a network terminating device in the circuit. In the United States and Canada, this must be provided by the client. In other countries or regions, it is most likely provided by the telephone company.
PAGE 128
#4805 #4805 PCI Cryptographic Accelerator The #4805 provides improved performance for high transaction rate secure Web applications, which use the Secure Sockets Layer (SSL) or Transport Layer Security (TLS) protocols. The process of using SSL/TLS secure Web connections, is very compute intensive. The Cryptographic Accelerator can be used to off-load cryptographic processing from main CPU.
PAGE 129
#4838 #4838 PCI 100/10 Mbps Ethernet IOA The #4838 PCI 100/10 Mbps Ethernet IOA feature allows the iSeries or AS/400e server to attach to standardized 100 Mbps high-speed Ethernet LANs and allows attachment to existing 10 Mbps Ethernet LANs. The adapter comes standard with an RJ45 connector for attachment to UTP-5 media. Cabling for 10 Mbps must be CAT-3 or CAT-5, and cabling for 100 Mbps must be CAT-5 that meets or exceeds Industry Standard EIA/TIA T568A or T568B. Maximum cable length is 100 meters.
PAGE 130
#5701 #5701 PCI 1 Gbps Ethernet UTP IOA The #5701 PCI 1 Gbps Ethernet UTP IOA allows an iSeries server to attach to IEEE standard 802.3Z high-speed (1 Gbps) Ethernet LANs. It can also be used to connect to existing 10 Mbps or 100 Mbps Ethernet LANs by using switches with 10/100/1000 Mbps ports. It cannot directly attach to 10 Mbps or 100 Mbps LANs. The adapter supports a UTP CAT 5 media interface. Cross over cables are not supported. The #5701 can be run under a #2892 PCI Integrated xSeries Server.
PAGE 131
#9771 #9771 Base PCI Two-Line WAN with integrated modem The #9771 is a 2-line WAN adapter. One port supports V.90 56K async data on PPP with an internal modem. The second port supports multiple protocol communications (WAN). Connection to the V.90 port uses a telephone cable. Use one of the following cables to connect to the WAN communication port: 򐂰 #0348 V.24/EIA232 20-ft. (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft. (15 m) PCI cable 򐂰 #0353 V.35 20-ft PCI cable 򐂰 #0354 V.35 50-ft PCI cable 򐂰 #0355 V.
PAGE 132
#9793 #9794 #9793 Two-Line WAN IOA with Modem The #9793 feature is a base 2-line WAN with Modem adapter and is the non-CIM version which is offered in all countries or regions except Australia and New Zealand. The #9794 feature is a base 2-line WAN with Modem adapter and is the CIM version, which is offered only in Australia and New Zealand. Port 0 is the modem port and supports V.92 56K Async PPP, V.92 data modem, V.44 data compression, V.34 Fax modem, and Fax functions such as ECM and 2D/1D conversion.
PAGE 133
#4317 #4317 8.58 GB 10k RPM Disk Unit (Ultra2 SCSI) The #4317 provides an additional 3 ½-inch single disk unit with 8.58 GB capacity. Minimum operating system level: OS/400 V4R4 The #4317 is a Customer Install Feature. The #4317 was withdrawn from marketing on for new orders on 03 December 2002. Feature conversion to #4317 remain available. #4318 #4318 17.54 GB 10k RPM Disk Unit (Ultra2 SCSI) The #4318 provides an additional 3 ½-inch single disk unit with 17.54 GB capacity.
PAGE 134
RPQ 847102 RPQ 847102 ships the disk mounting hardware and instructions required to convert a #6717/#6817 to a #4317, and a #6718/#6818 to a #4318. One RPQ is required for each disk unit to be converted. See “RPQ 847102” on page 277 for a full description. Internal tape units and CD-ROM Supported media See 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for the supported media for each tape device.
PAGE 135
#4583 #4583 16 GB ¼-inch Cartridge Tape Device The #4583 16 GB ¼-inch Cartridge Tape Device can be used for save/restore, alternate IPL, migration, and ¼-inch cartridge tape exchange using the appropriate media and density. This tape unit is not compatible with System/36 ¼-inch cartridge tape units. The #4583 can be mounted in the system unit of the Model 270. Minimum operating system level: OS/400 V4R5 (OS/400 V4R4 for the #4483) Refer to 9.
PAGE 136
#4587 #4587 50 GB ¼-inch Cartridge Tape Device The #4587 50 GB ¼-inch Cartridge Tape Device can be used for save/restore, alternate IPL, program distribution, migration, and ¼-inch cartridge tape exchange using the appropriate media and density. The #4587 is not compatible with System/36 ¼-inch cartridge tape units. The #4587 can be mounted in the system unit of the Model 270. Prerequisite: A disk unit controller in system unit or tower where device is mounted.
PAGE 137
#2749 #2749 PCI Ultra Magnetic Media Controller The #2749 is an Ultra SCSI IOA that provides attachment capability for external tape devices and external optical devices. The #2749 can attach one tape drive or one optical drive.
PAGE 138
#2757 (cont.) #2757 PCI-X Ultra RAID Disk Controller The number of arrays and size of each array can be influenced by specifying an optimization of either Balance, Performance, or Capacity in iSeries Navigator when starting arrays. An optimization of Balance is used by default when starting arrays from DST or SST options. If disk units are included in an existing array, parity might be spread across less than the preferred number of disk units.
PAGE 139
#2766 #2766 PCI Fibre Channel Disk Controller The #2766 provides Fibre Channel attachment capability for external disk devices. The #2766 supports point-to-point and arbitrated loop topologies and has an LC type cable connector. Each #2766 is shipped with a wrap connector (P/N 05N6767).
PAGE 140
#2780 #2780 PCI-X Ultra4 RAID Disk Controller The #2780 PCI-X Ultra4 RAID Disk Controller is an Ultra4 (u320) SCSI controller with a maximum compressed write cache size of 757 MB and maximum compressed read cache of one GB. The #2780 provides RAID-5 protection for internal disks and also supports internal tape units, CD-ROM, and DVD units. The #2780 has four Ultra4 SCSI buses.
PAGE 141
#2782 #2782 PCI-X RAID Disk Unit Controller-40 MB cache The #2782 is a PCI-X SCSI controller with a 40 MB cache that provides RAID-5 protection for internal disks and also supports internal tape units, CD-ROM and DVD devices. #2782 has two SCSI buses that support up to 12 disk units. Hardware data compression is not supported. In addition to providing RAID-5 protection for disks, #2782 also works as a high-performance controller for disks protected by system mirroring, or disks with no protection.
PAGE 142
#4748 #4748 PCI RAID Disk Unit Controller–26 MB Cache The #4748 is an Ultra2 SCSI controller with a 26 MB write-cache that provides RAID-5 protection and compression for internal disk units and supports internal tape units and CD-ROM units. The #4748 supports both compression and non-compression modes. The mode of operation is determined by a hardware jumper. The #4748 is shipped in non-compression mode. By moving the hardware jumper, the controller functions in compression mode.
PAGE 143
#5580 #5580 - 2780 Controller with Auxiliary Write Cache The #5580 provides a disk controller with auxiliary write cache to improve cache data redundancy. The #5580 includes a #2780 PCI-X Ultra4 RAID Disk Controller and a secondary IOA with 757MB of auxiliary maximum compressed write cache. The #2780 and the secondary IOA each require one PCI-X slot and must be installed together in the same system unit or I/O unit/drawer/tower.
PAGE 144
#5703 #5703 PCI-X RAID Disk Unit Controller The #5703 PCI-X RAID Disk Unit Controller is an Ultra3 SCSI controller with a cache size of 40 MB that provides RAID-5 protection for internal disks and internal tape units, CD-ROM, DVD-RAM and DVD-ROM units. The #5703 has two Ultra3 SCSI buses. In addition to providing RAID-5 protection for disks, the #5703 is designed to work as a high performance controller for disks protected by system mirroring or disks with no protection.
PAGE 145
5 Chapter 5. IBM AS/400e 720, 730, and 740 models This chapter identifies the capacities that are associated with each IBM AS/400e Model 720, 730, and 740 system. It also describes the features, such as the processor, power and packaging, main storage, workstation controllers, and communications—including local area networks (LAN) and asynchronous transfer mode (ATM), disk units, internal tape units, CD-ROM, and magnetic media controller features.
PAGE 146
5.1 AS/400e Model 720 overview The following tables provide the minimum and maximum capacities for the Model 720.
PAGE 147
5.2 AS/400e Model 730 overview The following tables provide the minimum and maximum capacities for the Model 730.
PAGE 148
5.3 AS/400e Model 740 overview The following tables provide the minimum and maximum capacities of the Model 740.
PAGE 149
5.4 Notes for AS/400e Models 720, 730, and 740 overview Note 1 The Commercial Processing Workload (CPW) is now used to measure the performance of all iSeries and AS/400e processors. The CPW value is measured on maximum configurations. The type and number of disk devices, the number of workstation controllers, the amount of memory, the system model, other factors, and the application being run determine the performance that is achievable.
PAGE 150
5.5 9406 Model 720 system unit schematics 5.5.
PAGE 151
5.5.
PAGE 152
6. For the #2809 in C03: – Slot C01 supports #2838/#9738 PCI 100/10 Mbps Ethernet IOA or #281x ATM. – Slot C02 supports the #2718 or #2729 PCI Magnetic Media Controller. – Slots C04/C05 support #2721, #2722, #2723, #2724, #2745, or #2746. 7. For the #2824 PCI Feature Controller in C03: – – – Slot C01 supports the #281x ATMs or #2838/#9738 PCI 100/10 Mbps Ethernet IOA. Slot C02 supports the #2718, #2729, #2750, #2751, #2761, #2838, #281x, or #4800.
PAGE 153
5.6.
PAGE 154
5.6.
PAGE 155
3. The #2838/#9738 PCI 100/10 Mbps Ethernet IOA is normally located in slot E06 or E11. However, if it is driven by the #2865 PCI Integrated Netfinity Server, one #2838/#9738 PCI 100/10 Mbps Ethernet IOA is located in slot E17. 4. Base PCI LAN/WAN/workstation IOP (CCIN 2824) in #9330 PCI integrated expansion unit slot E15 supports: – In slots E16 (high-speed slot): • It supports the #2726, #2741 PCI RAID Disk Unit Controller, or #2748 PCI RAID Disk Unit Controller.
PAGE 156
6. The #2824 PCI Feature Controller in the #9330 PCI integrated expansion unit slots E05 or E10 supports: – In slots E06 or E11 (high-speed slots): • It supports the #2718, #2729, #2745, #2746, #2750, #2751, #2761, #281x, #2838, or #4800. – In slots E02, E03, E04 or E07, E08, and E09 (low-speed slots): • It supports the #2721, #2722, #2723, #2724, #2745, #2746, #2750, #2751, or #2761. • It supports three cards in any combination.
PAGE 157
5.
PAGE 158
5.
PAGE 159
5.9 9406 System Unit Expansion Towers for Models 720, 730, and 740 schematics 5.9.
PAGE 160
5.9.2 #5072 and #5073 1063 Mbps System Unit Expansion Tower The #5072 1063 Mbps System Unit Expansion Tower and #5073 1063 Mbps System Unit Expansion Tower have the ability to control up to four tape devices or three tape devices and one CD-ROM (in positions D01, D02, and D03 only). There is a maximum of one CD-ROM device per #5072 or #5073 tower.
PAGE 161
5.9.
PAGE 162
5.10 AS/400e Models 720, 730, and 740 processors The AS/400e Models 720, 730, and 740 initial installation and model upgrades are performed by IBM Service Representatives. 720 processors #2061 #2062 #2063 #2064 146 Interactive feature 240 RSP CPW 1-way Processor in Client/Server Environment Base Memory 256 MB 1500 Base 35 RSP CPW in Interactive Environment The #2061-1500 is represented by Processor Feature Code 206A.
PAGE 163
730 processors #2065 #2066 #2067 #2068 Interactive feature 560 RSP CPW 1-way Processor in Client/Server Environment Base Memory 512 MB 1506 Base 70 RSP CPW in Interactive Environment The #2065-1506 is represented by Processor Feature Code 2A6A. 1507 Optional 120 RSP CPW in Interactive Environment The #2065-1507 is represented by Processor Feature Code 2A6B. 1508 Optional 240 RSP CPW in Interactive Environment The #2065-1508 is represented by Processor Feature Code 2A6C.
PAGE 164
740 processors #2069 #2070 Interactive feature 3660 RSP CPW 8-way Processor in Client/Server Environment Base Memory 1024 MB 1514 Base 120 RSP CPW in Interactive Environment The #2069-1514 is represented by Processor Feature Code 2D6B. 1510 Optional 1050 RSP CPW in Interactive Environment The #2069-1510 is represented by Processor Feature Code 2D6C. 1511 Optional 2000 RSP CPW in Interactive Environment The #2069-1511 is represented by Processor Feature Code 2D6D.
PAGE 165
#2695 #2695 Optical Bus Adapter The #2695 allows for the addition of up to three #2686 or #2688 Optical Link Processors in any combination. Card slots used: One Maximum: Two #2730 #2730 Programmable Regulator The #2730 is required when five or more main storage cards are installed. Uses slot R12. Supported on Model 730. #5043 #5043 Primary to Secondary Rack Conversion The #5043 is used for the conversion of a 9406 F Model system unit rack to a #9171 type rack.
PAGE 166
#5066 #5066 1.8 M I/O Tower The #5066 provides two additional buses. The #5066 is actually two #5065 Storage/PCI Expansion Towers installed in a 1.8M I/O Tower. The #5066 reports to the system as two #5065s. The #5066 1.8 M I/O Tower includes two 1063 Mbps optical bus cards, various cables (including optical cables) and the 1.8M I/O Tower.
PAGE 167
#5153 #5153 Redundant Power Supplies The #5153 consists of two power supplies: a 950 watt (re-rated to 970 at OS/400 V4R3) and a 650 watt (re-rated to 700 at OS/400 V4R3). The #5153 provides redundancy for the power supplies in the system unit and system unit expansion. The #5153 physically resides in the #5064/#9364 system unit expansion.
PAGE 168
Main storage Base There are no features to specify the base memory 256 MB on all of the Model 720 processors. For main storage must be added in pairs, and feature codes must be installed in pairs. The same rules apply to quads. #2830 Main Storage Expansion Riser Card The #2830 mounts additional main storage DIMMs. It contains 16 sockets for placement of 32 MB DIMMs or 128 MB DIMMs.
PAGE 169
#3192 1024 MB Main Storage Card Must be added in pairs on Model 730 processor features #2065, #2066, and #2067. Must be added in quads on Model 730 processor feature #2068 and on the Model 740. Requires one dedicated memory card slot. Maximum: Five pairs on Model 730 #2065, #2066, and #2067; three quads on Model 730 #2068; four quads on Model 740 Supported on Models 730 and 740 #3193 2048 MB Main Storage Card Must be added in pairs on Model 730 processor features #2065, #2066, and #2067.
PAGE 170
Workstation controllers Base MFIOP Base Multifunction IOP (PCI) The MFIOP on the 720 is part of the planar and does not occupy a PCI card slot. The base system includes this MFIOP, which has three low-speed slots (C08, C09, C10) and one high-speed PCI card slot C11 used for the base system disk controller #2726, #2740, #2741 PCI RAID Disk Unit Controller, #2748 PCI RAID Disk Unit Controller, or #9728. The MFIOP also drives one Integrated PC Server or a PCI Integrated xSeries Server.
PAGE 171
#2722 #2722 Twinaxial Workstation IOA (PCI) The #2722 is an 8-port attachment provided to support 40 active twinaxial devices. PCI slots required: One (low-speed only) #2746 #2746 PCI Twinaxial Workstation IOA (PCI) The #2746 is an 8-port attachment provided to support 40 active twinaxial devices.
PAGE 172
#2824 (cont.) #2824 PCI Feature Controller Maximum: One in the system unit, two in the #9329/#9330 PCI integrated expansion unit, two in the #5065 Storage/PCI Expansion Tower See PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for additional restrictions. Also supported on the #5034 and #5035 Migration Tower I, the #5055 Storage Expansion Unit and the #5066 1.8 M I/O Tower. It is supported for migration only on the #503x Migration Tower.
PAGE 173
#9754 #9754 MFIOP with RAID (Ultra SCSI) CCIN 6754 The #9754 is an Ultra SCSI controller that provides unprotected, mirrored, or RAID-5 protection for internal disk units. It includes a 4M write cache for better performance and improved device utilization. The #9754 controls the internal CD-ROM drive and one internal tape unit. It contains three IOA slots for communications, LAN, and twinaxial I/O adapters.
PAGE 174
#2612 #2612 EIA 232/V.24 One-Line Adapter (SPD) The #2612 connects to #2623 to support one communication line using Async, BSC, SDLC, or X.25 protocols. One cable must be specified: 򐂰 #9023 EIA 232/V.24 20-ft (6 m) enhanced cable 򐂰 #9835 EIA 232/V.24 50-ft (15 m) enhanced cable 򐂰 #9022 EIA 232/V.24 20-ft (6 m) cable 򐂰 #9836 EIA 232/V.24 50-ft (15 m) cable SPD slots required: None Prerequisite: #2623 6-line Communications Controller #2613 #2613 V.
PAGE 175
#2655 #2655 EIA 232/V.24 2-Line Adapter with 20-foot Cable The #2655 connects to #2623 to support two communications lines supporting Async, BSC, SDLC, or X.25 protocols using two EIA 232/V.24 20-ft (6.2 m) cables. SPD slots required: None Prerequisite: #2623 6-Line Communications Controller #2656 #2656 X.21 2-Line Adapter with 20-foot Cable The #2656 connects to #2623 to support two communications lines to attach to a X.21 or X.25 network using 20-ft (6.2 m) cables.
PAGE 176
#2699 #2699 Two-Line WAN IOA (SPD) The #2699 supports up to two multiple protocol communications ports when one or two of the following cables are attached: 򐂰 #0328 Operations Console 20-ft (6 m) cable 򐂰 #0329 V.24/EIA232 80-ft (24 m) cable 򐂰 #0330 V.24/EIA232 20-ft (6 m) cable 򐂰 #0331 V.24/EIA232 50-ft (15 m) cable 򐂰 #0332 V.24/EIA232 20-ft (6 m) enhanced cable 򐂰 #0333 V.24/EIA232 50-ft (15 m) enhanced cable 򐂰 #0334 V.24/EIA232 80-ft (24 m) enhanced cable 򐂰 #0335 V.36/EIA449 20-ft (6 m) cable 򐂰 #0336 V.
PAGE 177
#2745 #2745 PCI 2-Line WAN IOA The #2745 supports up to two multiple protocol communications ports when one or two of the following cables are attached: 򐂰 #0348 V.24/EIA232 20-ft. (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft. (15 m) PCI cable 򐂰 #0350 V.24/EIA232 20-ft (6 m) enhanced PCI cable 򐂰 #0351 V.24/EIA232 50-ft (15 m) enhanced PCI cable 򐂰 #0352 V.24/EIA232 80-ft (24 m) enhanced PCI cable 򐂰 #0353 V.35 20-ft (6 m) PCI cable 򐂰 #0354 V.35 50-ft (15 m) PCI cable 򐂰 #0355 V.
PAGE 178
#2761 #2761 Integrated Analog Modem The #2761 allows the modem function to be integrated into the IOA and supports multiple analog modem ports (eight phone lines). The #2761 runs the following protocols without the need for an external modem: 򐂰 SLIP/PPP uses V.90, so the maximum line speed is 56 Kbps. 򐂰 SDLC uses V.34, so the maximum line speed is 33.6 Kbps. 򐂰 Fax uses V.17 to achieve a 14.4 Kbps maximum line speed. An asynchronous line description is required for Fax and can only be used for Fax.
PAGE 179
#9699 #9699 Base 2-Line WAN IOA The #9699 supports up to two multiple protocol communications ports when any one or two if the following cables are attached: 򐂰 #0328 20-ft (6 m) Operations Console Cable (OS/400 V4R3 required) 򐂰 #0329 V.24/EIA 232 80-ft (24 m) cable 򐂰 #0330 V.24/EIA232 20-ft (6 m) cable) 򐂰 #0331 V.24/EIA232 50-ft (15 m) cable) 򐂰 #0332 V.24/EIA232 20-ft (6 m) enhanced cable 򐂰 #0333 V.24/EIA232 50-ft (15 m) enhanced cable 򐂰 #0334 V.24/EIA232 80-ft (24 m) enhanced cable 򐂰 #0335 V.
PAGE 180
#9745 #9745 Base PCI 2-Line WAN IOA The #9745 is a two line communications adapter which supports ECS and Client Access Console. Select one of the following cables for ECS: 򐂰 #0348 V.24/EIA232 20-ft (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft (15 m) PCI cable 򐂰 #0350 V.24/EIA232 20-ft (6 m) Enhanced PCI cable 򐂰 #0351 V.24/EIA232 50-ft (15 m) Enhanced PCI cable 򐂰 #0352 V.24/EIA232 80-ft (24 m) Enhanced PCI cable 򐂰 #0353 V.35 20-ft (6 m) PCI cable 򐂰 #0354 V.35 50-ft (15 m) PCI cable 򐂰 #0355 V.
PAGE 181
#9754 #9754 MFIOP with RAID (Ultra SCSI) CCIN 6754 The #9754 is an Ultra SCSI controller that provides unprotected, mirrored, or RAID-5 protection for internal disk units. It includes a 4M write cache for better performance and improved device utilization. The #9754 controls the internal CD-ROM drive and one internal tape unit. It contains three IOA slots for communications, LAN, and twinaxial I/O adapters. IOA slot A is reserved for attaching one #2699 2-Line WAN IOA or one #6149 or #6181 LAN IOA.
PAGE 182
#2663 #2663 I/O Attachment Processor (SPD) The #2663 is an I/O processor required when attaching the #2668 Wireless LAN Adapter. The #2663 and #2668 are integrated in a single hardware package to operate as a unit. SPD slots required: One (with #2668 Wireless LAN Adapter) #2665 Shielded Twisted-Pair Distributed Data Interface Adapter (SPD) The #2665 provides one interface to connect to an FDDI LAN, which is constructed of IBM Cabling System Type 1, 2, 6, or 9 shielded twisted-pair wiring.
PAGE 183
#2811 #2811 PCI 25 Mbps UTP ATM IOA (PCI or SPD) The #2811 provides attachment into an ATM network using Unshielded Twisted Pair (UTP) cabling. The #2811 is used typically where 25 Mbps speed is required over distances of less than 100 meters.
PAGE 184
#2838 #9738 #2838 PCI 100/10 Mbps Ethernet IOA (PCI or SPD) The #2838/#9738 PCI 100/10 Mbps Ethernet IOA provides attachment to standard 100 Mbps high-speed Ethernet LANs and allows attachment to existing 10 Mbps Ethernet LANs. The Ethernet/IEEE 802.3 IOA is capable of operating in half or further duplex mode. The adapter comes standard with an RJ45 connector for attachment to UTP-5 media #9738 is a base LAN adapter.
PAGE 185
#2865 #2865 PCI Integrated Netfinity Server The #2865 contains an Intel 333 MHz Pentium II Processor, four main storage slots, and two LAN IOA slots. The #2865 provides high performance serving to LAN attached PCs. The four main storage slots can each contain one of the following features, giving a maximum of 1024 MB.
PAGE 186
#6181 #9381 #6181 ASCII Workstation Controller (SPD) The #6181 provides a single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network. It consists of an adapter card and internal code, which supplies Ethernet Version 2 and IEEE 802.3 MAC plus 802.2 LLC functions. It has a RJ45 connector and a 15-pin D-shell connector for attachment of client-supplied cabling. Cabling must meet or exceed Industry Standard EIA/TIA T568B. The #9381 is a base LAN adapter specify.
PAGE 187
#6617 #6617 Integrated PC Server (SPD) The #6617 contains a 200 MHz Pentium Processor, four main storage slots, and three LAN IOA slots for high performance serving to LAN-attached PCs. The four main storage slots can each contain one of the following features, for a maximum of 512 MB. A minimum of one main storage feature is required: 򐂰 #2861 32 MB Integrated PC Server Memory 򐂰 #2862 128 MB Integrated PC Server Memory Up to three of the following LAN IOAs are supported.
PAGE 188
#6618 (cont.) #6618 Integrated Netfinity Server (SPD) A #0221 Ethernet on IPCS is required for each #2723/#9723 selected to run on the #6618. A #0220 Token-ring on IPCS is required for each #2724/#9724 selected to run on the #6618. A #0222 100/10 Mbps Ethernet on IPCS is required for each #2838/#9738 selected to run on the #6618. When running Windows NT on the #6618, then: 򐂰 A minimum of 64 MB IOP memory is required. The maximum total memory is 1024 MB.
PAGE 189
Disk units #1312 1-byte 1.03 GB Disk Unit Conversion Kit The #1312 provides the hardware for migrating one 1.03 GB one-byte SCSI disk unit. It is supported only in the system unit or the #5064/#9364 system unit expansion. One #1312 migrates the #6601, #6602, #6701, #6802, #9601, or #9602 disk. Supported on Model 720 #1313 1-byte 1.96 GB Disk Unit Conversion Kit The #1313 provides the hardware for migrating one 1.96 GB one-byte SCSI disk unit.
PAGE 190
#1337 2-byte 4.19 GB Disk Unit Conversion Kit (Ultra SCSI) The #1337 provides the hardware for migrating one 4.19 GB 2-byte SCSI disk unit. Supported on Model 720 The #1337 was withdrawn from marketing on 31 October 2000. #1602 1-byte 1.03 GB Disk Unit Conversion Kit The #1602 provides the hardware for migrating one 1.03 GB one-byte SCSI disk unit. It is supported only in #5052, #5057, or #5058 Storage Expansion Unit positions 1 through 7. The #1602 was withdrawn from marketing on 31 March 1999.
PAGE 191
#4331 #4331 1.6 GB Read Cache Device The #4331 provides 1.6 GB of capacity for large read cache function. It is mutually exclusive with DASD compression. The system arrives in performance mode with compression function turned off on the #4748/#4778 PCI RAID Disk Unit Controller. For placement rules, see the full description of “#4331” on page 277.
PAGE 192
#6717 #6717 8.58 GB 10k RPM Disk Unit (Ultra SCSI) The #6717 2-byte disk unit provides a 3 ½-inch single disk unit with 8.58 GB capacity for additional disk storage. Supported in the #5052 Storage Expansion Unit, #5055 Storage Expansion Unit, #5057 Storage Expansion Unit, #5058 Storage Expansion Unit, #5082 Storage Expansion Tower, or #5083 Storage Expansion Tower, and in #9251 Base I/O Tower or Model 730 system tower.
PAGE 193
#6831 #6831 1.6 GB Read Cache Device The #6831 provides 1.6 GB of capacity for large read cache function. Is mutually exclusive with DASD compression. The system arrives in performance mode with compression function turned off on the #2748 PCI RAID Disk Unit Controller. Mirroring is not supported on the #6831. Prerequisite: #2748 PCI RAID Disk Unit Controller One DASD slot 1.
PAGE 194
#8818 #8818 17.54 GB Optional Base Two-byte Disk Unit 10k RPM (Ultra SCSI) The #8818 provides a 3 ½-inch single disk unit with 17.54 GB capacity as the base disk unit in place of the #9707. It is supported only in the system unit or #5064/#9364 system unit expansion. It is not supported on the #9364 with the #6502, #6512, or #6530. Supported on Model 720 Minimum operating system level: OS/400 V4R4 The #8818 was withdrawn from marketing on 28 December 2001. #8824 17.
PAGE 195
#1355 13 GB ¼-inch Cartridge Tape Unit Conversion Kit The #1355 provides the hardware for migrating #6385 13 GB ¼-inch cartridge tape unit. It is supported only in the system unit or the #5064/#9364 system unit expansion. Supported on Model 720 #1360 7 GB 8 mm Cartridge Tape Unit Conversion Kit The #1360 provides the hardware for migrating a #6390 7 GB 8 mm cartridge tape unit. It is supported only in the system unit or the #5064/#9364 system unit expansion. Supported on Model 720 #1379 1.
PAGE 196
#4486 #4486 25 GB ¼-inch Cartridge Tape Device The #4486 can be used for save/restore, alternate IPL, migration and ¼-inch cartridge tape exchange using the appropriate media and density. This tape unit is not compatible with System/36 ¼-inch cartridge tape units. Supported only in the #5065 Storage/PCI Expansion Tower Minimum operating system level: OS/400 V4R4 Refer to 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for additional characteristics.
PAGE 197
#6381 #6381 2.5 GB ¼-inch Cartridge Tape The #6381 can be used for save/restore, alternate IPL, migration and ¼-inch cartridge tape exchange using the appropriate media and density. Refer to 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for additional characteristics. Supported only in the #5072, #5073, or #9251 Base I/O Towers and in the Model 730 system tower.
PAGE 198
#6425 #6425 Optional CD-ROM Feature Prerequisite: #2626 16/4 Mbps Token Ring Adapter/A, #2740 PCI RAID Disk Unit Controller, #2741 PCI RAID Disk Unit Controller, #2748 PCI RAID Disk Unit Controller, or #9728 Base Disk Unit Controller with the #9329 PCI Card Expansion Unitt/#9330 PCI integrated expansion unit. Maximum: One CD-ROM is allowed in the base system unit and one optional in the integrated expansion unit.
PAGE 199
#6485 13 GB ¼-inch Cartridge Tape Unit The #6485 can be used for save/restore, alternate IPL, migration and ¼-inch cartridge tape exchange using the appropriate media and density. This tape unit is not compatible with System/36 ¼-inch cartridge tape units. Refer to 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for additional characteristics. Supported in the system unit of the Model 720 and in the #5064/#9364 system unit expansion.
PAGE 200
#2726 PCI RAID Disk Unit Controller — 4 MB Cache (RAID/Mirrored/Unprotected) (Ultra SCSI) The #2726 is an Ultra SCSI controller which provides RAID protection and a 4 MB write-cache for up to 15 disks installed in the system unit or #5064/#9364 system unit expansion. A minimum of four drives and a maximum of 10 drives are supported in each array. A maximum of three arrays is allowed for each #2726.
PAGE 201
#2748 #2748 PCI RAID Disk Unit Controller — 26 MB Cache (RAID Mirrored/Unprotected) (Ultra2 SCSI) The #2748 PCI RAID Disk Unit Controller is Ultra2 SCSI capable when installed in the #5065 Storage/PCI Expansion Tower is Ultra SCSI capable when installed in the Model 720 system unit or a #5064/#9364 system unit expansion. The #2748 has a 26 MB write-cache and provides RAID-5 protection and compression for internal disk units. It supports up to 15 disks.
PAGE 202
#6501 #6501 Tape/Disk Device Controller (SPD) The #6501 provides attachment for the 2105 Versatile Storage Server™. The #9728 provides attachment for up to two 9337 2xx, 4xx or 5xx Models. Also supports up to two 3490E Cxx, 3490E Exx, 3490E Fxx, 3494 Lxx or Dxx, 3570, 3575, 3580, 3581, 3582, 3583, 3584 or 3590-Bxx/Exx drives, and attachment for the 2105 Versatile Storage Server. DASD and tape units cannot be mixed on the same #6501.
PAGE 203
#6534 #6534 Magnetic Media Controller (Ultra SCSI) (SPD) The #6534 provides attachment for one 3490E Cxx with #5040, 3490E Exx, 3490E Fxx, 3494 D1x or L1x, 3570, 3575, 3580, 3581, 3582, 3583, 3584, 3590, 7208, 9348, and 9427 tape drives or 3995 Optical Library Dataserver - Model C4x. SPD slots required: One Minimum operating system to support 3995: OS/400 V4R2 #9728 #9728 Base Disk Unit Controller (Ultra SCSI) CCIN 2728 The #9728 is the Base IOA for the system unit.
PAGE 204
188 iSeries and AS/400e System Builder
PAGE 205
6 Chapter 6. IBM iSeries 820, 830, and 840 models This chapter provides the summary charts and diagrams and identifies the processor features that are associated with each IBM iSeries 820, 830, and 840 server. You can find the feature descriptions, including details about power and packaging and main memory, in Chapter 7, “IBM iSeries 820, 830, and 840 features and placement” on page 223.
PAGE 206
6.1 iSeries Model 820 overview The following tables provide the system minimum and maximum capacities in the Model 820.
PAGE 207
The following tables provide system minimum and maximum capacities in the Model 820 Dedicated Server for Domino.
PAGE 208
Numbers are for all 820 processor features Base system #5075, #5095, #0595 PCI Expansion Tower #5074, #5079, #5094, #5294, #5078, #0578, #5088, #0588 PCI Expansion Tower13 Migrated total with #503x5a, 5c New system maximum6 Disk storage (GB)12 Internal minimum Internal maximum External maximum10 Total maximum DASD arms maximum Internal arms External LUNs10 8.58 421.9 4501.1 4923.1 140 12 128 210.9 4501.1 4712.1 134 6/12 128/96 1582.4/3175.2 6751.6 8298.9 236 45 192 1625.9 1595.3 1625.
PAGE 209
6.2 iSeries Model 830 overview The following tables provide the system minimum and maximum capacities for the Model 830.
PAGE 210
Numbers are for all 830 processor features #9074 Base system #5095, #0595 PCI Expansion Tower #5074, #5079, #5094, #5294, #5078, #0578, #5088, #0588 PCI Expansion Tower 13 Migrated total with #5034, #5035 5a Migrated total with #5077 5b New system max 6 Disk storage (GB)12 Internal minimum Internal maximum External maximum Total maximum10 DASD arms maximum10 Internal arms External LUNs10 8.58 1582.4 5626.4 7208.8 205 45 160 210.9 4501.1 4712.1 134 6/12 96 1582.4/3175.2 6751.6 8298.
PAGE 211
6.3 iSeries Model 840 overview The following tables provide the system minimum and maximum capacities for the Model 840.
PAGE 212
Numbers are for all 840 processor features #5074, #5079, #5094, #5294, #5078, #0578, #5088, #0588 PCI Expansion Tower 12 #5095, #0595 PCI Expansion Tower #9079 Base system Migrated total with #5077 5b New system max 6 Disk storage (GB)13 Internal minimum Internal maximum External maximum Total maximum10 DASD arms maximum10 Internal arms External LUNs 8.58 1582.4 5626.4 7208.8 205 45 160 210.9 4501.1 4712.1 134 6/12 96 1582.4/3175.2 6751.6 8298.9 205 45 192 4294.9 4260.6 4294.9 596 596 595 37978.
PAGE 213
6.4 Notes for iSeries Models 820, 830, and 840 overview Note 1 Commercial Processing Workload (CPW) is used to measure the performance of all iSeries and AS/400e processors announced from September 1996 onward. The CPW value is measured on maximum configurations. The type and number of disk devices, the number of workstation controllers, the amount of memory, the system model, other factors, and the application running determine what performance is achievable.
PAGE 214
Note 11a Model 820 Software group is determined by the combination of processor feature and edition feature. Display the QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value. This value is also shown for the Capacity Card CCIN value when using SST to perform a Capacity Upgrade on Demand.
PAGE 215
Note 11a Model 820 (cont.
PAGE 216
Note 11b Model 830 (cont.) Note 11c Model 840 Processor feature Interactive feature Software group Processor feature code or QPRCFEAT value #2403 #1531 P40 23D8 #1532 P50 23D9 #1533 P50 23DA #1534 P50 23DB #1535 P50 23DC #1536 P50 23DD #1537 P50 23DE Software group is determined by the combination of processor feature and edition feature. Display the QPRCFEAT system value or DSPHDWRSC TYPE(*AHW) to display the processor feature code value.
PAGE 217
Note 11c Processor feature Model 840 #2416 (cont.
PAGE 218
Note 11c Software group is determined by a combination of the processor and interactive feature. The following table provides a cross reference. Model 840 Processor feature Interactive feature Software group Processor feature (cont.) #2461 #1540 P40 26D0 #1541 P50 26D1 #1542 P50 26D2 #1543 P50 26D3 #1544 P50 26D4 #1545 P50 26D5 #1546 P50 26D6 #1547 P50 26D7 #1548 P50 26D8 Note 12 The #5078, #0578, #5088, and #0588 expansion units contain PCI slots only. Disk is not supported.
PAGE 219
6.5 9406 Model 820 system unit schematic D14 REM. MEDIA CD/DVD Panel D13 OP REM.
PAGE 220
Model 820 Processor and Memory #2395 and #2435 M03 Processor A DIMM CONN - J0B E DIMM CONN - J0C I DIMM CONN - J0D M SMI CPU Regulator DIMM CONN - J0A SMI DIMM CONN - J1D N DIMM CONN - J1C J DIMM CONN - J1B F DIMM CONN - J1A B #2396, #2425, #0150, #2436, #2456 A DIMM CONN - J0B DIMM CONN - J0C E I DIMM CONN - J0D CPU Processor Regulator M03 DIMM CONN - J0A SMI M02 Memory Riser Card M SMI DIMM CONN - J1D N DIMM CONN - J1C J DIMM CONN - J1B F DIMM CONN - J1A B or Me
PAGE 221
P05 B03 B03 1100 W Power Supply 2/4-Way Processor Card M03 P04 DB3 DB2 #5101 DISK SLOTS DISK SLOTS D21 D22 D23 D24 D25 D26 D27 D28 D29 D30 DISK SLOTS DISK SLOTS D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 DISK SLOTS IOP 2-Line WAN w/Modem DISK IOA Console DB1 1,2 3,4 5,6 7,8 D31 D32 D33 D34 D35 D36 D37 D38 D39 D40 C01 C02 C03 C04 DISK SLOTS Multi-Adapter Bridge Bus Number DISK SLOTS PCI Cards D46 D47 D48 D49 D50 AC Input DISK SLOTS D01 D02 D03 D04 D05 D06 D07 D08 D09 D10 Front 2 1
PAGE 222
Model 830 Main Storage Card (CCIN 2881) 7 Y Q G 5 W N E 3 U L C 1 S J A 8 Z R H 6 X P F 4 V M D 2 T K B Legend Base Feature Required Feature Unavailable if Integrated xSeries Server is installed Note 1: If C05 has an Integrated xSeries Server, slot C06 is unavailable, and slot C07 is available only as a short slot. Note 2: If C11 has an Integrated xSeries Server, slot C12 is unavailable, and slot C13 is available only as a short slot.
PAGE 223
6.7 9406 Model 840 system unit schematic Legend Processor Processor Regulator Processor A A A Processor Regulator Base Feature M01-03 M04 M05 Required Feature Unavailable if Integrated xSeries Server is installed B B B M06 M07 M08-10 MS MS Rem Media D42 DISK SLOTS OP Panel Programmable Programmable CD/DVD D41 Program 24-Way Programmable Programmable Programmable 2.
PAGE 224
Legend Note 1: If C05 has an Integrated xSeries Server, slot C06 is unavailable, and slot C07 is available only as a short slot. Unavailable if Integrated xSeries Server is installed B C C C C Note 3: The position of the cards may change depending on the console and other features selected.
PAGE 225
6.9 iSeries Models 820, 830, and 840 processors The iSeries Model 820 initial installation is Customer Setup (CSU). Model upgrades are performed by IBM Service Representatives. The iSeries Model 830 and 840 initial installation and model upgrades are performed by IBM Service Representatives.
PAGE 226
#2396 #2397 210 5250 features 950 CPW Uni-Processor in Client/Server Environment 򐂰 Includes eight DIMM memory positions (plug directly into the backplane – direct attach). If more than eight DIMMs total are required, a #2884 Main Storage Expansion Riser Card must be used and all DIMMs must then reside on the #2884.
PAGE 227
#2398 5250 features 3200 CPW 4-way Processor in Client/Server Environment 򐂰 Includes 16 DIMM memory positions by way of the base main storage expansion card (CCIN 2884) 򐂰 Includes base I/O backplane and 32 MB embedded base IOP (CCIN 284C) with CSP (CCIN 282D) 򐂰 Provides support for the Service Processor, nine 32-bit and three 32- or 64-bit PCI slots 򐂰 Processor CCIN 244E The #2398 was withdrawn from marketing 03 December 2002.
PAGE 228
#2435 #2436 #2437 212 5250 features 600 CPW Uni-Processor in Client/Server Environment 򐂰 Includes eight slots for main storage DIMMs that plug directly into the processor 򐂰 Includes base I/O backplane with CSP (CCIN 282D) 򐂰 Provides support for the Service Processor, nine 32-bit and three 32- or 64-bit PCI slots 򐂰 Processor CCIN 25BC The #2435 was withdrawn from marketing 21 November 2003. #1521 Base 35 CPW in 5250 Environment The #2435-#1521 is represented by Processor Feature Code 249B.
PAGE 229
#2438 5250 features 3700 CPW 4-way Processor in Client/Server Environment 򐂰 Includes 16 DIMM memory positions by way of the base main storage expansion card (CCIN 2884) 򐂰 Includes base I/O backplane with CSP (CCIN 282D) 򐂰 Provides support for the Service Processor, nine 32-bit and three 32- or 64-bit PCI slots 򐂰 Processor CCIN 25BE The #2438 was withdrawn from marketing 21 November 2003. #1521 Base 35 CPW in 5250 Environment The #2438-#1521 is represented by Processor Feature Code 24B8.
PAGE 230
#2349 #2400 214 5250 features 4200/7350 CPW 4/8-way Processor in Client/Server Environment; required minimum memory 1 GB Base features include: 򐂰 Main Storage Expansion Card (Slot M02) (CCIN 2881) 򐂰 #9754 Bus Expansion Clock Card—Eight HSL Ports Cluster Enabled (CCIN 2754) Specify with processor #2349 򐂰 Processor Capacity Card (CCIN 2349) 8-way 򐂰 Processor 0 (CCIN 245D) 򐂰 Processor 1 (CCIN 245D) #1605 is the IBM eServer Capacity Upgrade on Demand (CUoD) activation code (up to four on the #2349) Minimum
PAGE 231
#2402 #2403 5250 features 4200 CPW 4-way Processor in Client/Server Environment Base features include: 򐂰 Main Storage Expansion Card (Slot M02) (CCIN 2881) 򐂰 #9733 Bus Expansion/Clock Card—Eight HSL Ports (CCIN 25AD) Specify with processors #2402 for OS/400 V4R5 򐂰 #9754 Bus Expansion Clock Card—Eight HSL Ports Cluster Enabled (CCIN 2754) Specify with processor #2402 for OS/400 V5R1 and later 򐂰 Processor Capacity Card (CCIN 2402) 򐂰 Processor 0 (CCIN 245D) The #2402 was withdrawn from marketing on 03 Decem
PAGE 232
840 processors #0158 5250 features 12000 CPW 12-way Processor in Client/Server Environment 򐂰 Processor Capacity Card (CCIN 0158) 򐂰 Processor 0 (CCIN 245F) 򐂰 Processor 1 (CCIN 245E) 򐂰 Processor 2 (CCIN 245E) 򐂰 Processor 3 (CCIN 245E) The #0158 was withdrawn from marketing on 21 November 2003.
PAGE 233
#2353 #2354 5250 features 12000/16500 CPW 12/18-way Processor in Client/Server Environment 򐂰 Processor Capacity Card (CCIN 2353) 򐂰 Processor 0 (CCIN 245F) 򐂰 Processor 1 (CCIN 245E) 򐂰 Processor 2 (CCIN 245E) The #1604 is the CUoD activation code (up to six on the #2353) The #2353 was withdrawn from marketing on 21 November 2003. #1540 Optional 120 CPW in 5250 Environment The #2353-#1540 is represented by Processor Feature Code 26B8.
PAGE 234
#2416 #2417 218 5250 features 7800/10000 CPW 8/12-way Processor in Client/Server Environment The standard features include: 򐂰 Processor Capacity Card (CCIN 2416) 򐂰 Processor 0 (CCIN 245F) 򐂰 Processor 1 (CCIN 245E) The #1604 is the CUoD activation code (up to four on the #2416) The #2416 was withdrawn from marketing on 03 December 2002. #1540 Optional 120 CPW in 5250 Environment The #2416-#1540 is represented by Processor Feature Code 24C0.
PAGE 235
#2418 #2419 5250 features 10000 CPW 12-way Processor in Client/Server Environment Standard features include: 򐂰 Processor Capacity Card (CCIN 2418) 򐂰 Processor 0 (CCIN 245F) 򐂰 Processor 1 (CCIN 245E) The #2418 was withdrawn from marketing on 03 December 2002. #1540 Optional 120 CPW in 5250 Environment The #2418-#1540 is represented by Processor Feature Code 23E8. #1541 Optional 240 CPW in 5250 Environment The #2418-#1541 is represented by Processor Feature Code 23E9.
PAGE 236
#2420 #2461 220 5250 feature 16500 CPW 24-way Processor in Client/Server Environment The standard features include: 򐂰 Processor Capacity Card (CCIN 2420) 򐂰 Processor 0 (CCIN 245F) 򐂰 Processor 1 (CCIN 245E) 򐂰 Processor 2 (CCIN 245E) 򐂰 Processor 3 (CCIN 245E) The #2420 was withdrawn from marketing on 03 December 2002. #1540 Optional 120 CPW in 5250 Environment The #2420-#1540 is represented by Processor Feature Code 23F8.
PAGE 237
6.10 iSeries Models 820, 830, and 840 features You can find feature descriptions, including details about power and packaging and main memory, in Chapter 7, “IBM iSeries 820, 830, and 840 features and placement” on page 223. 6.11 Supported upgrades for Models 820, 830, and 840 Upgrades to, from, and within the iSeries 820, 830, and 840 servers are not supported.
PAGE 238
222 iSeries and AS/400e System Builder
PAGE 239
7 Chapter 7. IBM iSeries 820, 830, and 840 features and placement This chapter describes the features that are supported in the IBM iSeries 820, 830, and 840 system units and towers, such as the power and packaging, main storage, workstation controllers, and communications features. This includes local area networks (LANs), disk units, internal tape units, CD-ROM, DVD-RAM, DVD-ROM, and magnetic media controllers.
PAGE 240
7.1 PCI card placement for iSeries servers The implementation of Peripheral Component Interconnect (PCI) architecture in iSeries servers provides flexibility in the placement of input/output processors (IOPs) and input/output adapters (IOAs). This can result in a more efficient use of card slots, which in turn can lower the cost of implementation. For example, a specific PCI IOP can support two high-performance IOAs, or four slower IOAs.
PAGE 241
#0123 #5074 Lower Unit in Rack The #0123 feature specifies that one #5074 PCI Expansion Tower is to be mounted in the bottom of a #0551 iSeries Rack. The #0123 can be specified on initial orders and on Miscellaneous Equipment Specification (MES) orders, but support for field merging a #5074 into a #0551 iSeries Rack is not offered (due to the weight of the #5074). A line cord for the #5074 must be ordered with the #5074.
PAGE 242
#0142 #0142 Linux Partition Specify The #0142 is used to specify that this system is to be logically partitioned with a Linux partition. Specify one #0142 for each Linux partition required. There are no minimum number of Linux direct attached features required per Linux partition. A Linux partition can exist without any Linux direct attached features in it (in this case, virtual storage, virtual LAN and virtual console is virtualized by way of the iSeries server).
PAGE 243
#0142 (cont.) #0142 Linux Partition Specify See the descriptions of the individual feature to understand the capabilities and PCI slot limitations of the features attached directly to Linux partitions. Linux direct attach features do not use or require PCI IOPs. They are only supported in a secondary LPAR partition and require OS/400 V5R1 or later running in the primary partition. Corequisite: #0140 Logical Partition Specify.
PAGE 244
#0550 #0550 iSeries Rack - 830 Rack The #0550 iSeries Rack provides a 1.8 m rack for housing the Model 830 system unit. The #5101 30 Disk Unit Expansion is included in the system unit (no #5101 is required on the order). 10 EIA units of space remains. This space is filled with one 5-EIA unit filler panel, one 3-EIA unit filler panel and two 1-EIA unit filler panels. The IBM marketing configurator does not manage space in the #0550. One to two PDUs can be ordered with the #0550.
PAGE 245
#0551 (cont.) #0551 iSeries Rack The IBM marketing configurator does not manage rack space in the #0551 iSeries Rack.
PAGE 246
#0574 #0574 - #5074 Equivalent The #0574 PCI Expansion Unit in Rack is the equivalent of a #5074 PCI Expansion Unit, but the #0574 is installed in an #5079 1.8 M I/O Tower. For each #5079 ordered, a default quantity of two #0574 specify codes appear on the order. One #0574 can be removed from the #5079 order. #0574s can be RPQ added/removed to/from system inventory records, but a minimum of one #0574 must exist for each #5079 on the inventory records.
PAGE 247
#0595 #0595 PCI-X Expansion Unit in Rack The #0595 PCI-X Expansion Unit in Rack is a five EIA high rack-mounted version of the #5095 PCI-X Expansion Tower, which provides I/O capability for iSeries servers. The #0595 has identical functional capabilities to the #5095. A #9844 Base PCI IOP is included as base for the #0595 PCI-X Expansion Unit in Rack. A #9877 - Base HSL-2 Bus Adapter is shipped with new orders of a #5094 for Models 820, 830, 840.
PAGE 248
#5034 #5034 Migration Tower I The #5034 Migration Tower I is a converted Model 620/S20/720 system tower with 10 possible disk positions and any #5064/#9364 System Unit Expansion. It is used for migration of PCI and SPD cards, disk units, and removable media devices along with any attached PCI/SPD towers. See the Model 620 and S20 section of AS/400e RISC System Builder, REDP-0342, and 5.11, “AS/400e Models 720, 730, and 740 features” on page 148, for supported cards and devices.
PAGE 249
#5074 #5074 PCI Expansion Tower The #5074 PCI Expansion Tower is attached to Models 820, 830, and 840 for adding up to 45 disk units (15 are “base”, 30 additional with #5101 or #5111), up to 11 PCI IOAs and up to two removable media units. The #5074 includes #9691 or #2739/#9739 bus adapter to provide the HSL interface to the system, a #9943 Base PCI IOP, space for two removable media devices, one battery backup, and redundant or hot swap power supplies.
PAGE 250
#5075 (cont.) #5075 PCI Expansion Tower 򐂰 #1474 - 6 m HSL to HSL-2 Cable 򐂰 #1475 - 10 m HSL to HSL-2 Cable Select one of the following SPCN cables per tower: 򐂰 #1463 - 2 m SPCN Cable 򐂰 #1464 - 6 m SPCN Cable 򐂰 #1465 - 15 m SPCN Cable 򐂰 #1466 - 30 m SPCN Cable One #14xx power cord must be specified (geography dependent). Maximum: Five Supported on Model 820 The #5075 is a Customer Install Feature. The #5075 was withdrawn from marketing on 21 November 2003.
PAGE 251
#5078 #5078 PCI Expansion Unit The #5078 PCI Expansion Unit is a “top hat” that installs on top of the #9079 Base I/O Tower and on top of the #5074 PCI Expansion Tower. The #5078 has 14 PCI slots, which allows up to 11 PCI IOAs to be added. The PCI IOAs are supported (driven) by #2843 PCI IOPs, #2790 PCI Integrated Netfinity Server, and #2791/#2792/#2799 PCI Integrated xSeries Servers. Disk units and removable media devices are not supported and cannot be installed in the #5078 PCI Expansion Unit.
PAGE 252
#5079 #5079 1.8 M I/O Tower (PCI I/O Expansion Tower) The #5079 1.8 M I/O Tower is attached to Models 820, 830, and 840 for adding up to 90 disk units, up to 22 PCI IOAs, and up to four removable media units. The #5079 includes two (in any combination) #9691 or #9739 optical HSL bus adapters to provide the HSL interface to the system. The #5079 is essentially two #5074 PCI Expansion Towers, stacked in a single 1.8 m tower. Each ordered #5079 counts as two #5074s toward the system model maximums.
PAGE 253
#5088 #5088 PCI-X Expansion Unit The #5088 PCI-X Expansion Unit is an 8 EIA high “top hat”, which can be installed on top of a #5074/#5094 PCI-X Expansion Tower or on top of a #9079 Base PCI I/O Enclosure. The #5088 has 14 PCI-X slots for installation of PCI IOPs and IOAs. Disk units and removable media are not supported by the #5088 and cannot be installed.
PAGE 254
#5094 #5094 PCI-X Expansion Tower The #5094 PCI-X Expansion Tower is a PCI expansion tower which provides I/O capability for iSeries servers. The #5094 has 15 disk unit slots, with an additional 30 slots available with the #5108 30-Disk Expansion Feature. The #5094 has two removable media slots and 14 PCI-X IOP/IOA card slots. A #9844 Base PCI IOP is included as base and needs to be listed on an initial order for a #5094 PCI-X Expansion Tower.
PAGE 255
#5094 (cont.) #5094 PCI-X Expansion Tower PCI IOAs are supported (driven) by the #9844/#9943 Base PCI IOP, #2843/#2844/#2847 PCI IOPs, #2790 PCI Integrated Netfinity Server, #2791/#2792/#2799 PCI Integrated xSeries Servers or #4710/#9710 Integrated xSeries Servers. The 45 disk unit positions are in groups of 15. Each group of 15 disk units is further divided into three groups of five disk units.
PAGE 256
#5095 (cont.) #5095 PCI-X Expansion Tower Select an appropriate number of the following HSL/HSL-2 cables: 򐂰 #1307 -1.75 m Copper HSL-2 Cable 򐂰 #1470 - 6 m Optical HSL Cable 򐂰 #1472 - 100 m Optical HSL Cable 򐂰 #1473 - 250 m Optical HSL Cable 򐂰 #1474 - 6 m HSL to HSL-2 Cable 򐂰 #1475 - 10 m HSL to HSL-2 Cable 򐂰 #1482 - 3.
PAGE 257
#5103 #5103 Dual Line Cords - 830 CEC The #5103 Dual Line Cords - 830 CEC provides dual line cord capability for the system unit and attached #9074 Base I/O Tower. Two 14xx line cords must be ordered when a #5103 is ordered on an initial order. When ordering a #5103 as an MES, one additional #14xx line cord is required to be ordered (for a total of two line cords for the system unit). If the #9074 has feature #5101 installed, the #5101 must be converted to a #5111 (no parts shipped).
PAGE 258
#5157 #5157 Feature Power Supply The #5157 adds an additional 575-watt power supply to the Model 820. The #5157 is required when a #7127 DASD Expansion Unit is added to a Model 820 and is required when a #5155 Redundant Power and Cooling feature is added to a Model 820. For Model 820 processors #2397, #2398, #2426, and #2427, a #5157 Feature Power Supply must be present or ordered when a feature #2884 Main Storage Expansion Riser Card is added or ordered. Supported on Model 820.
PAGE 259
#5294 (cont.) #5294 1.
PAGE 260
#5723 #5723 2-Port Async EIA -232 PCI IOA The #5723 provides connection for two asynchronous EIA-232 devices. Ports are programmable to support EIA-232 protocols at a line speed of 128 Kbps. Provides two asynchronous ports. Occupies one PCI slot. Minimum Operating System level required: AIX 5L for POWER, OS/400 V5R2 for iSeries #6069 #6069 Optional Front Door for 2.0 m Rack The #6069 provides an black full height rack door on the #0553 iSeries 2.0 m Rack.
PAGE 261
#7840 #7840 Side-by-Side for 1.8 m Racks The #7840 allows a row of racks without side panels to be bolted together in a continuous suite, using the provided side-to-side rack connecting hardware. When multiple racks are joined in this way, cables can be easily run between racks without having to exit the continuous rack enclosure. A small gap is maintained between the two adjacent racks, which is filled by three matching steel trim pieces that snap into place on the front, top, and rear, between each rack.
PAGE 262
#9074 #9074 Base I/O Tower The #9074 Base I/O Tower is the base I/O tower shipped on the Model 830. The #9074 supports up to 45 disk units (15 units are “base”, with an additional 30 provided with #5101 or #5111), up to 11 PCI IOAs, up to two removable media units, one battery backup, and redundant or hot swap power supplies. The #9074 has a #9943 Base PCI IOP and a #9748 Base PCI RAID Disk Unit Controller.
PAGE 263
7.3 Models 830 and 840 Capacity on Demand 8xx Capacity On Demand #1604 #1604 CUoD Activation The #1604 CUoD Activation is used to order a password to activate one additional processor on the Model 840 with a Capacity Upgrade on Demand (CUoD) processor feature. One or more #1604s can be ordered on initial orders or with MES to activate additional processors.
PAGE 264
Model 830 and 840 Main Memory Rules Memory features for the Model 830 and 840: All main storage cards must be added in sets of eight on the Model 830 (octals) and sets of four (quads) on the Model 840. All memory sets must be of the same feature code.
PAGE 265
#3005 512 MB Main Storage DIMM 128 Mb technology Plugs directly into the CPU or #2884 See “Model 820 Main Memory Rules” on page 247 for memory rules. The #3006 cannot be mixed with #3005 in pairs or quads. Supported on Model 820, all processors The #3005 is a Customer Install Feature. #3006 512 MB Main Storage DIMM 256 Mb technology Plugs directly into the CPU or #2884 See “Model 820 Main Memory Rules” on page 247 for memory rules. The #3006 cannot be mixed with #3005 in pairs or quads.
PAGE 266
#3196 8192 MB Main Storage Card 256 Mb technology Can be selected only to achieve 81920 MB and 98304 MB main storage increments See “Model 830 and 840 Main Memory Rules” on page 248. Prerequisite: #2730 Programmable Regulator Maximum: 16 Supported on Model 840 #3197 1024 MB Main Storage Card 64 Mb technology See “Model 830 and 840 Main Memory Rules” on page 248. Maximum: 16 Supported on Model 840 #3198 2048 MB Main Storage Card 64 Mb technology See “Model 830 and 840 Main Memory Rules” on page 248.
PAGE 267
7.5 PCI IOP controllers PCI IOP controllers PCI Rules PCI cards are subject to plugging rules. PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 describes the configuration and card placement rules that you must understand and follow to develop valid configurations. Use these IBM Redpapers as guides when configuring IOAs and input/output processors (IOPs) so that the system is sized to meet client expectations. Refer to 7.
PAGE 268
#2843 #9943 (cont.
PAGE 269
#2844 #9844 (cont.
PAGE 270
#2790 #2791 #2799 #2790 PCI Integrated Netfinity Server, #2791 PCI Integrated xSeries Server and #2799 PCI Integrated xSeries Server The #2790 PCI Integrated Netfinity Server contains a 700 MHz processor. The #2791 PCI Integrated xSeries Server contains an 850 MHz processor. The #2799 PCI Integrated xSeries Server contains a 1.0 GHz Intel Pentium III processor. Each processor contains four memory slots in the xSeries IOP.
PAGE 271
#2790 #2791 #2799 (cont.) #2790 PCI Integrated Netfinity Server, #2791 PCI Integrated xSeries Server and #2799 PCI Integrated xSeries Server Native OS/400 functions are not supported. The #2790, #2791, and #2799 do not support an external host LAN. The #2849 is not supported on any Integrated Netfinity Server/Integrated xSeries Server. Refer to PCI Card Placement Rules for the IBM Eserver iSeries Server Version 5 Release 2, REDP-3638 for additional restrictions.
PAGE 272
#2792 #9792 #2792 PCI Integrated xSeries Server The #2792 PCI Integrated xSeries Server contains a 1.6 GHz processor and four memory slots in the xSeries IOP. The #9792 includes two #9726 server memory features (must be ordered as a pair). The #9792 is allowed only on new systems that have sufficient PCI slots for manufacturing to place the feature within the system.
PAGE 273
#2890 #2891 #2899 #2890 PCI Integrated Netfinity Server, #2891 PCI Integrated xSeries Server, #2899 PCI Integrated xSeries Server The #2890 PCI Integrated Netfinity Server contains a 700 MHz processor. The #2891 PCI Integrated xSeries Server contains an 850 MHz processor. The #2899 PCI Integrated xSeries Server contains a 1 GHz Pentium III processor. Each processor contains four memory slots in the xSeries IOP.
PAGE 274
#2892 #2892 PCI Integrated xSeries Server The #2892 PCI Integrated xSeries Server contains a 1.6 GHz processor and four memory slots in the xSeries IOP. Each server memory slot of the #2892 PCI Integrated xSeries Server can contain either a 512 MB server memory card or a 1024 MB server memory card, providing allowable main storage options of 1024 MB, 2048 MB, 3072 MB, and 4096 MB. All server memory cards must be installed in identical pairs.
PAGE 275
#4710 #4810 #9710 (cont.) #4710/#4810/#9710 PCI Integrated xSeries Server When a LAN feature is used in conjunction with a #4710, the following ordering rules apply: 򐂰 One #0223 100 Mbps Token-Ring Specify is required for each #2744 driven. 򐂰 One #0226 1 Gbps Ethernet Specify is required for each #5700/#5701 driven. 򐂰 Up to three IOA LAN features can be supported by the #4710/#4810, depending on the system unit or tower position into which the #4710, #4810, or #9710 is placed.
PAGE 276
#5544 #5544 System Console on Operations Console A system console specify code must be selected on each new order. When a #5544 is on the order, the system console can be connected to a #0367 Operations Console PCI Cable attached to a #4745 PCI 2-line WAN IOA or a #9771/#9793/#9794 Base PCI 2-Line WAN with integrated modem. Supported on Models 820, 830, 840 #5546 #5546 System Console on 100 Mbps Token Ring A system console specify code must be selected on each new order.
PAGE 277
7.7 LAN and WAN adapters LAN and WAN adapters Comm. See “Comm. Restrictions” on page 103, for communications rules and restrictions. See PCI Card Placement Rules for the Restrictions IBM eServer iSeries Server, REDP-3638 for further placement rules. #2742 #2742 2-Line WAN IOA The #2742 2-Line WAN IOA is a WAN IOA that supports up to two multiple protocol communications (RVX) ports when one or two (in any combination) of the following cables are attached.
PAGE 278
#2743 #2743 1 Gbps PCI Ethernet IOA The #2743 PCI 1 Gbps Ethernet IOA feature allows the iSeries server to attach to IEEE standard 802.3Z high speed Ethernet LANs (1 Gbps). It can also be used to connect to existing 100 Mbps Ethernet LANs using switches with 10/100/1000 Mbps ports. The adapter supports multi-mode fiber media attachment to client-supplied cabling. The multi-mode interface has a 62.5/125 micron or 50.0/125 micron cable requirement with an SC connector.
PAGE 279
#2760 #2760 PCI 1 Gbps Ethernet UTP Adapter The #2760 PCI 1 Gbps Ethernet UTP Adapter feature allows the iSeries server to attach to IEEE standard 802.3Z high-speed Ethernet LANs (1 Gbps) to provide a significant performance improvement over other LAN solutions. The adapter supports a UTP CAT 5 media interface. When driven by a #2843 PCI IOP, this adapter only supports TCP/IP. This adapter can directly attach to 10 Mbps or 100 Mbps networks.
PAGE 280
#2773 #2773 PCI Dual WAN/Modem IOA The #2773 is a 2-line WAN adapter, with two ports (RJ11) supporting V.90 56K Async PPP and Fax applications at data rates up to 14.4K with internal modems. Telephone cable is used to connect to the V.90 ports. This is the CIM version of this #2772/#2773 card. The #2773 can be attached directly to a Linux partition. When ordered as #0610 - Direct Attach - #2773 PCI Dual WAN/Modem IOA, an IOP is not required.
PAGE 281
#2793 #9793 (cont.) #2793 2-Line WAN IOA with Modem The #0367 cable ships with a 25-pin to 9-pin adapter. When #0140 logical partitioning is specified, multiple #0367 cables can be ordered to connect the operations console in each partition. ECS is supported from the RVX port and one of the following cables is required to support ECS: #0348, #0349, or #0365. ECS is supported from the Modem port (OS/400 V5R1 or later).
PAGE 282
#2805 #2805 PCI Quad Modem IOA The #2805 is a 4-line WAN adapter with four WAN ports with internal modems. Telephone cable (RJ-11) is used to connect to the ports. This is the non-CIM version of the IOA. Supported protocols are: 򐂰 V.92 56 K Async PPP 򐂰 Fax applications at data rates up to 33.6 K The V.92 functions offer increased upload throughput, improved V.44 data compression, and shortened modem synchronization periods. The #2805 can be attached directly to a Linux partition.
PAGE 283
#2806 (cont.) #2806 PCI Quad Modem (CIM) The call waiting and modem on hold functions associated with V.92 are not supported. Remote Power On through ring-indicator, SDLC, and synchronous PPP are not supported. PCI card slots required: One Minimum operating system level: OS/400 V5R1 with PTFs identified in Information APAR II13079 at: http://www-912.ibm.com/supporthome.nsf/document/10000035 The #2806 is a Customer Install Feature.
PAGE 284
#4745 #4745 PCI 2-line WAN IOA The #4745 supports up to two multiple protocol communications ports when one or two of the following cables are attached: 򐂰 #0348 V.24/EIA232 20-ft (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft (15 m) PCI cable 򐂰 #0353 V.35 20-ft PCI cable 򐂰 #0354 V.35 50-ft PCI cable 򐂰 #0355 V.35 80-ft PCI cable 򐂰 #0356 V.36 20-ft PCI cable 򐂰 #0358 V.36 150-ft PCI cable 򐂰 #0359 X.21 20-ft PCI cable 򐂰 #0360 X.21 50-ft PCI cable 򐂰 #0365 V.
PAGE 285
#4751 #4751 PCI ISDN BRI S/T IOA The #4751 is a four-port (eight channel) ISDN BRI (basic rate) full-sized PCI card. Each port consists of 2B+D configuration. The #4751 is the “S/T”-bus (four wire) version of the #4750 PCI ISDN BRI U IOA. The #4751 requires a network terminating device in the circuit. In the United States and Canada, this must be provided by the client. In other countries or regions, it is most likely provided by the telephone company.
PAGE 286
#4805 #4805 PCI Cryptographic Accelerator The #4805 provides improved performance for high transaction rate secure Web applications that use the Secure Sockets Layer (SSL) or Transport Layer Security (TLS) protocols. The process of using SSL/TLS secure Web connections, is compute intensive. The Cryptographic Accelerator can be used to off-load cryptographic processing from main CPU.
PAGE 287
#4838 #4838 PCI 100/10 Mbps Ethernet IOA The #4838 PCI 100/10 Mbps Ethernet IOA feature allows the iSeries or AS/400e server to attach to standardized 100 Mbps high-speed Ethernet LANs and allows attachment to existing 10 Mbps Ethernet LANs. The adapter comes standard with an RJ45 connector for attachment to UTP-5 media. Cabling for 10 Mbps must be CAT-3 or CAT-5, and cabling for 100 Mbps must be CAT-5 that meets or exceeds Industry Standard EIA/TIA T568A or T568B. The maximum cable length is 100 meters.
PAGE 288
#5701 #5701 PCI 1 Gbps Ethernet UTP IOA The #5701 PCI 1 Gbps Ethernet UTP IOA allows an iSeries server to attach to IEEE standard 802.3Z high-speed (1 Gbps) Ethernet LANs. It can also be used to connect to existing 10 Mbps or 100 Mbps Ethernet LANs by using switches with 10/100/1000 Mbps ports. It cannot directly attach to 10 Mbps or 100 Mbps LANs. Crossover cables are not supported. The #5701 adapter supports a UTP CAT 5 media interface.
PAGE 289
#6618 #6618 Integrated Netfinity Server (SPD) The #6618 Integrated Netfinity Server contains an Intel 333 MHz Pentium II Processor, four main storage slots, and three LAN IOA slots for high performance LAN serving to LAN-attached PCs. All three PCI slots can be used for Integrated PC Server functions. Two of the three PCI slots can support native iSeries functions. The #6618 requires three IOP slots. The slots must be adjacent.
PAGE 290
#9771 #9771 Base PCI 2-Line WAN with integrated modem The #9771 is a 2-line WAN adapter. One port supports V.90 56K async data on PPP with an internal modem. The second port supports multiple protocol communications (WAN). Connection to the V.90 port uses a telephone cable. Use one of the following cables to connect to the WAN communication port: 򐂰 #0348 V.24/EIA232 20-ft (6 m) PCI cable 򐂰 #0349 V.24/EIA232 50-ft (15 m) PCI cable 򐂰 #0353 V.35 20-ft PCI cable 򐂰 #0354 V.35 50-ft PCI cable 򐂰 #0356 V.
PAGE 291
#0041 #0041 Device Parity Protection Capability The #0041 Device Parity Protection Capability indicates the level of disk protection desired and helps ensure that adequate hardware is in the final configuration. The #0041 is the default specify code for data protection capability. For new systems, the #0041 causes the order to fail if a disk unit or adapter is ordered that is not capable of implementing RAID protection.
PAGE 292
#08xx #08xx Load Source Specify Codes Beginning with the 0S/400 V5R1 announcement, one of the following specify codes is required on all initial order for Models 820, 830, 840.
PAGE 293
#4324 #4324 17.54 GB Disk Unit (Ultra SCSI) The #4324 provides a 3 ½-inch single disk unit with 17.54 GB capacity for additional disk storage (7200 RPM). Supported on Models 820, 830, 840 Minimum operating system level: OS/400 V4R4 The #4324 is a Customer Install Feature. #4326 #4326 35.16 GB 15k RPM Disk Unit (SCSI) The #4326 provides a single 3 ½-inch disk unit for additional disk storage with 35.16 GB capacity (15000 RPM).
PAGE 294
7.9 Internal tape units and CD-ROM Internal tape units and CD-ROM Supported media See 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for the supported media for each tape device. #4425 #4525 #4625 #4425/#4525/#4625 CD-ROM The #4425, #4525, or #4625 can be used for alternate IPL (IBM distributed CD-ROM media only) and program distribution. A CD-ROM, DVD-RAM or DVD-ROM is required for each system.
PAGE 295
#4482 #4582 #4682 #4482/#4582/#4682 4 GB ¼-inch Cartridge Tape Device The #4482, #4582, or #4682 4 GB ¼-inch Cartridge Tape Device can be used for save/restore, alternate IPL, program distribution, migration, and ¼-inch cartridge tape exchange using the appropriate media and density. This tape unit is not compatible with System/36 ¼-inch cartridge tape units. Prerequisite: Available removable media device slot and disk unit controller in the system unit or expansion tower in which the device is mounted.
PAGE 296
#4486 #4586 #4686 #4486/#4586/#4686 25 GB ¼-inch Cartridge Tape Device The #4486, #4586, and #4686 25 GB ¼-inch Cartridge Tape Device is a 25GB ¼-inch cartridge tape unit that mounts in a removable media device slot of a system unit or an expansion drawer/tower. The #4486, #4586, and #4686 25 GB ¼-inch Cartridge Tape Device can be used for save/restore, alternate IPL, program distribution, migration and ¼-inch cartridge tape exchange.
PAGE 297
#4531 #4631 #4531 DVD-ROM/#4631 DVD-ROM The #4531/#4631 DVD-ROM is a 5 ¼-inch device which is mounted in a removable media device slot. The #4531/#4631 is capable of reading 640 MB CD-ROM media and 4.7 GB DVD-RAM media. It is an alternate IPL (IDE bus attach) device, so a SCSI/ATAPI converter card is required and is included with the device. The converter card requires its own power source, so a power flex cable is included.
PAGE 298
#4633 #4633 DVD-RAM The #4633 DVD-RAM is a half high optical media device. The #4633 uses cartridgeless media only. This is different from the #4630 DVD-RAM which can use cartridge media. The media can be removed from the cartridge to be used in the #4633. Media support is limited to writing DVD-RAM only and reading of CD-ROM, CD-R, DVD-ROM and DVD-RAM.
PAGE 299
#2749 #2749 PCI Ultra Magnetic Media Controller The #2749 is an Ultra SCSI IOA that provides attachment capability for external tape devices and external optical devices. The #2749 can attach one tape drive or one optical drive.
PAGE 300
#2757 #2757 PCI-X Ultra RAID Disk Controller The #2757 PCI-X Ultra RAID Disk Controller is an Ultra SCSI controller with a maximum write cache size of 235 MB (757MB compressed) that provides RAID-5 protection for internal disks and also supports internal tape units, CD-ROM, and DVD units. The #2757 has four Ultra4 SCSI buses.
PAGE 301
#2765 (cont.
PAGE 302
#2766 (cont.) #2766 PCI Fibre Channel Disk Controller Clients must supply all Fibre Channel cables for the #2766. See the “Hard rules: iSeries IOA capabilities” topic in PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638 for additional restrictions. Multi target support with a maximum of 32 targets is supported with OS/400 V5R2. Minimum operating system level: OS/400 V5R1 The #2766 is a Customer Install Feature.
PAGE 303
#2782 #2782 PCI-X RAID Disk Unit Controller The #2782 is a PCI-X SCSI controller with a 40 MB cache that provides RAID-5 protection for internal disks and also supports internal tape units, CD-ROM and DVD devices. #2782 has two SCSI buses that support up to 12 disk units. Hardware data compression is not supported. In addition to providing RAID-5 protection for disks, #2782 also works as a high-performance controller for disks protected by system mirroring, or disks with no protection.
PAGE 304
#4748 #9748 #4748 PCI RAID Disk Unit Controller The #4748/#9748 is an Ultra2 SCSI controller with a 26 MB write-cache that provides RAID-5 protection and compression for internal disk units and supports internal tape units and CD-ROM units. The #4748/#9748 supports both compression and non-compression modes. The mode of operation is determined by a hardware jumper. The #4748/#9748 is shipped in non-compression mode. By moving the hardware jumper, the controller functions in compression mode.
PAGE 305
#4778 #9778 (cont.) #4778 PCI RAID Disk Unit Controller Minimum operating system level: OS/400 V5R1 The #4778 is a Customer Install Feature. The #4778 was withdrawn from marketing on 19 November 2004. Conversions to the #4778 remain available. #5580 #5580 - 2780 Controller with Auxiliary Write Cache The #5580 provides a disk controller with auxiliary write cache to improve cache data redundancy.
PAGE 306
#5703 #5703 PCI-X RAID Disk Unit Controller The #5703 PCI-X RAID Disk Unit Controller is an Ultra3 SCSI controller with a cache size of 40 MB that provides RAID-5 protection for internal disks and internal tape units, CD-ROM, DVD-RAM and DVD-ROM units. The #5703 has two Ultra3 SCSI buses. In addition to providing RAID-5 protection for disks, the #5703 is designed to work as a high performance controller for disks protected by system mirroring or disks with no protection.
PAGE 307
#5705 #5705 PCI-X Tape/DASD Controller The #5705 PCI-X Tape/DASD Controller provides SCSI Ultra4 PCI attachment capability for external tape devices, external removable media devices, and internal DASD devices. There are two SCSI buses on each #5705. Each SCSI bus has both an internal port and an external port for a total of four ports on the card. Each SCSI bus can have only one attachment, either internal or external.
PAGE 308
292 iSeries and AS/400e System Builder
PAGE 309
8 Chapter 8. IBM iSeries towers schematics This chapter identifies the system diagrams for the towers that are supported by the IBM iSeries servers and the power and packaging features for those towers. Migration towers are the result of an upgrade from an AS/400e 600, 620, 640, 650, 720, 730, 740, or Sxx model to an iSeries 820, 830, or 840 model.
PAGE 310
Model General availability Withdrawn from marketing #5294 1.8m I/O Tower 28 February 2003 --- #8079 Optional Base 1.8 M I/O Rack 3 October 2000 21 November 2003 #8093 Optional 1.8 M I/O Rack 14 May 2002 07 May 2003 #9057 Storage Expansion Unit 19 August 1997 01 January 2004 #9094 Base PCI-X I/O Enclosure 14 May 2002 01 October 2005 #9194 Base PCI-X Expansion Tower 15 October 2004 --- Note: The darker shaded areas in the following graphics follow indicate the base features.
PAGE 311
8.1 9406 iSeries towers, racks, and expansion unit schematics 8.1.1 #5074 PCI Expansion Tower The #5074 PCI Expansion Tower is supported by Models 820, 830, 840, SB2, and SB3. Note: The total number of disk bays is 45.
PAGE 312
8.1.2 #5075 PCI Expansion Tower The #5075 PCI Expansion Tower includes a 32 MB Peripheral Component Interconnect (PCI) IOP (CCIN 284B) embedded on its backplane. The #5075 is supported by the Model 820. Multi-Adapter Bridge Bus Number OP Panel OP Panel Fan #5156 B02 Fan #5156 B02 Fan B01 Fan B01 7,8 Multi5,6 Adapter 3,4 Bridge Boundary 1,2 PCI Cards IOA Short 1 IOP/IOA IOP/IOA IOP/IOA/Int. xSeries Svr Slots C08 C07 C06 C05 7,8 5,6 3,4 2 1 2 IOA IOP/IOA IOP/IOA/Int.
PAGE 313
8.1.3 #5078/#0578 PCI Expansion Unit 1 7,8 IOA IOP/Int. xSeries Svr IOA IOA IOP/IOA Back Front Legend Base Feature 1,2 3 4 5,6 B04 C11 B03 HSL adapter 5,6 IOP/IOA 7,8 IOA BULK C09 C10 BULK 2 C12 C13 C14 C15 OP Panel Bridge Bus Slots Multi-Adapter PCI Cards Number C01 1,2 IOP C02 3,4 IOA C03 5,6 IOP/IOA C04 7,8 IOA C05 1,2 IOP/Int.
PAGE 314
8.1.4 #5079 1.8 M I/O Tower The #5079 1.8 M I/O Tower is supported by Models 820, 830, and 840. The #5079 consists of two #5074 PCI Expansion Towers with side covers and casters removed. Note: Total number of disk bays is 2 x 45 AC Input D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 DISK SLOTS DISK SLOTS D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 DISK SLOTS 298 AC Input DISK SLOTS D01 D02 D03 D04 D05 D06 D07 D08 D09 D10 iSeries and AS/400e System Builder C05 1,2 IOP/Int. Netfinity Svr.
PAGE 315
8.1.5 #5088/#0588 PCI-X Expansion Unit C10 C11 1,2 IOP/IOA/IXS 3 IOP/IOA C12 4 IOP/IOA C13 C14 5,6 IOP/IOA C15 7,8 IOA MultiAdapter Bridge Boundary Note: All slots are 3.
PAGE 316
8.1.6 #5094 PCI Expansion Tower The #5094 PCI-X Expansion Tower is supported by Models 820, 830, and 840. Note: The total number of disk bays is 45. FAN B01 DB1 DB2 #5108 DISK SLOTS DISK SLOTS Note: All slots are 3.
PAGE 317
8.1.7 #5095/#0595 PCI-X Expansion Tower The #5095 PCI-X Expansion Tower and #0595 PCI-X Expansion Unit in Rack are supported by the Models 820, 830, and 840.
PAGE 318
8.1.8 #5294 PCI-X Expansion Tower The #5294 1.8m I/O Tower is supported by Models 820, 830, and 840. The #5294 consists of two #5094 PCI-X Expansion Towers with side covers and casters removed. Note: The total number of disk bays is 2 x 45. 5,6 IOP/IOA 7,8 IOA 1,2 IOP/IXS C05 2 3 IOP/IOA 4 IOP/IOA 5,6 IOP/IOA 7,8 IOA C14 C15 C13 C12 HSL adapter 1,2 IOP/IOA C11 C10 P03 AC Dist Box AC Dist Box (A01) (A02) Note: All slots are 3.
PAGE 319
8.2 #8079 Optional Base Rack The #8079 Optional Base 1.8 M I/O Rack is the 1.8 meter optional base I/O rack for the Model 840. Note: The total number of disk bays is 2 x 45.
PAGE 320
8.3 Migration towers schematics Migration towers are used to migrate existing PCI and SPD cards, existing disk units, and existing removable media devices. Migration towers are HSL attached but contain SPD buses only. The I/O and disk units in the former system unit and any attached towers remain accessible to the upgraded system with the connection of a migration tower to the HSL loop.
PAGE 321
8.3.3 #5077 Migration Tower II The #5077 Migration Tower II is supported on the Models 830, 840, SB2 and SB3.
PAGE 322
306 iSeries and AS/400e System Builder
PAGE 323
9 Chapter 9. External storage, SANs, QIC, and VXA-2 formats for IBM iSeries and AS/400e servers This chapter describes the external storage options for IBM iSeries and AS/400e servers, including disk drives, diskette drives, tape devices, automated tape libraries, and optical devices and storage area networks (SANs). This chapter also includes specifications and supporting documentation for ¼-inch cartridge or VXA-2 compatibility. © Copyright IBM Corp.
PAGE 324
9.1 External disk storage for iSeries and AS/400e systems External disk drives and subsystems offer an optional configuration for IBM iSeries and AS/400e servers to extend disk storage capacity. This section describes the external disk storage configurations supported on these servers. 9.1.1 9336 and 9337 DASD Machine Model 9336 010 9336 020 9336 025 Type-model1 Description Direct Access Storage Device Provides 942 MB of DASD with two disk drives (471 MB each) with one actuator.
PAGE 325
9337-540 9337-545 9337-580 9337-585 9337-590 9337-595 Note 1 1967 1967 4194 4194 8589 8589 S S S S S Models 0xx and 1xx Models 2xx/4xx Models 4xx Models 545/585/595 Models 5xx Y=Yes 4/8 4/8 4/8 4/8 4/8 4/8 #1249 #1249 #1289 #1289 #1290 #1290 15.73 15.73 33.55 33.55 68.71 68.71 13.76 13.76 29.35 29.35 60.12 60.
PAGE 326
9.1.3 Versatile Storage Server Machine B09 Description 9406 models 2105 Versatile Storage Server The 2105 is the primary enclosure of the Versatile Storage Server (VSS). It includes the storage server, two 7133 drawers, and the power control system. There is space for two additional 7133 disk drawers. The primary enclosure can be combined with up to two 2105-100 expansion enclosures. The 2105 attaches to the AS/400e system using a #6501 Tape/Disk Device Controller (System Products Division (SPD)).
PAGE 327
9.1.4 IBM TotalStorage Enterprise Storage Server Machine 2105 Description 9406 models 2105 Enterprise Storage Server The 2105 is the enclosure of the IBM TotalStorage Enterprise Storage Server (ESS). Each 2105 incorporates dual RISC 4-way SMP processors, read/write cache up to 64 GB, up to 384 MB non-volatile storage (NVS) (write cache), four device adapter pairs, and 8-packs of disks in the optimum serial loop configuration.
PAGE 328
2105 (cont.) Notes for ESS Model Summary Matrix: 1. Capacity quoted is RAID 5 effective capacity. 2. Capacity quoted is raw physical capacity and can be RAID 5, RAID 10, or a combination of both. 3. 9.1 GB drives are withdrawn from marketing.
PAGE 329
9.1.5 IBM TotalStorage DS6000 Machine 1750 411 511 EX1 Description 9406 models TotalStorage DS6000 The IBM TotalStorage DS6000 Family (a DS6800 with expansion enclosure) provides an intelligent disk system that delivers enterprise-class storage capabilities in a space-efficient, 2 Gbps Fibre architecture, modular design.
PAGE 330
1750 (cont.) DS6000 model summary matrix Model number Raw physical capacity 73 GB (15, 000 rpm) drives 146 GB (10, 000 rpm) drives 300 GB (10, 000 rpm) drives Cache Power DS6400 (411) 292 GB 33.6 TB 1 Yes Yes Yes 2 GB Single phase DS6400 (511) 292 GB 67.2 TB 2 Yes Yes Yes 4 GB Single phase DS6000 Expansion Enclosure (EX1) 292 GB 4.8 TB per enclosure Yes Yes Yes N/A Single phase Notes: 1. Using 6 fully populated DS6000 Expansion Enclosures (1750-EX1) with 300 GB disks 2.
PAGE 331
9.1.6 IBM TotalStorage DS8000 Machine 2107 921 922 9A2 Expansion Units 92E 9AE Description TotalStorage DS8000™ The IBM TotalStorage DS8000 series incorporates IBM POWER5™ processor technology in a dual 2-way processor-complex offering the DS8100 (2107-921), or a dual four-way processor-complex offering, the DS8300 (2107-922 and 2107-9A2). The Model 9A2 enables the creation of multiple storage system LPARs (logical partitions). The DS8000 offers up to 32 host adapters.
PAGE 332
2107 (cont.) DS8000 model summary matrix Model number Raw physical capacity Expnsn enclsrs spprtd Processor 73 GB (15 000 rpm) Drives 146 GB (10 000 rpm) drives 300 GB (10 000 rpm) drives Cache Power DS8100 (921) 1.1 TB115.2 TB1 1 2-way Yes Yes Yes 16 to 128 GB Three phase DS8300 (922) 1.1 GB 192 TB2 2 4-way Yes Yes Yes 32 to 256 GB Three phase DS8300 (9A2) 1.1 GB 192 TB3 2 4-way Yes Yes Yes 32 to 256 GB Three phase Notes: 1.
PAGE 333
9.2 SAN components for iSeries systems This section lists SAN switches, hubs, and directors supported by the iSeries server. For the latest SAN support information, refer to the following Web sites: http://www-1.ibm.com/servers/storage/san/index.html http://www-1.ibm.com/servers/storage/support/san/index.html http://knowledge.storage.ibm.com/HBA/HBASearchTool 9.2.
PAGE 334
Machine Description Family 2026 IBM TotalStorage SAN12 m-1 Entry and SAN24M-1 Mid-range The IBM 2026 SAN12 m-1 entry switch Model E12 is designed to meet the needs of entry level SAN applications, first-time SAN deployments, departmental SANs, and application specific deployments.
PAGE 335
Machine Description The 2061 Cisco MDS 9120 Multilayer Fabric Switch Models 020 and 040 The 2061 Cisco MDS 9120 Multilayer Fabric Switch Model 020 is a 20-port Fibre Channel switch packaged in a one RU enclosure, designed with four full-rate ports, 16 oversubscribed ports, and redundant hot-swappable power supplies and fans.
PAGE 336
Machine Description 2062-D01 2062 Cisco Systems MDS 9216 The 2062 Cisco Systems MDS 9216 (2062-D01) is a three-rack-unit fabric switch with dual redundant power supplies, fan assembly, 16 or 32 port switching module, the ability to be configured to accept either Short Wave SFP or Long Wave SFP optic transceivers, 16 to 48 auto-sensing Fibre Channel ports, and language support.
PAGE 337
Machine 2031 224 Description McDATA Sphereon Fibre Channel Switch Model 4500 The IBM 2031 McDATA Sphereon “Core to Edge” 4500 Fibre Channel Switch Model 224 provides storage consolidation using a high availability and high-port density 1-U high design. The McDATA Sphereon 4500 offers up to 24 non-blocking ports (longwave or shortwave transceivers), providing 1 Gbps and 2 Gbps FC-AL and Fabric (FC-SW) operation. The ports are auto-sensing and auto-negotiating, and can be purchased in 8-port increments.
PAGE 338
Machine Description 2031 232 McDATA ES-3232 Fibre Channel Switch The IBM 2031 McDATA ES-3232 Enterprise to Edge Fabric Switch Model 232 is designed to provide workgroup and departmental Fibre Channel SAN capability. The 2 Gbps McDATA ES-3232 offers up to 32 non-blocking ports. The minimum configuration contains 16 shortwave ports, and the remaining 16 ports can be configured with either shortwave or longwave transceivers. The McDATA ES-3232 is a 1.
PAGE 339
Machine Description 2034 212 McDATA Sphereon Fibre Channel Switch Model 4300 The McDATA Sphereon 4300 Fabric Switch (2034-212) is designed to offer from 4 to 8 to 12 non-blocking ports, providing 1 and 2 Gbps Fibre Channel ports utilizing industry standard-based auto-sensing and auto-negotiating operation with Fabric and Public Loop attached devices.
PAGE 340
Machine Description 2109 F16 IBM TotalStorage SAN Switch Model F16 The IBM 2109 SAN Switch Model F16 includes 16 non-blocking ports, each with full-duplex throughput at either 2 Gbps or 1 Gbps, and auto-sensing ports that self-negotiate to the highest speed supported by the attached server, storage device, or switch. Zoning support is included. Hardware zoning is controlled at the port level. Software zoning is controlled at the worldwide name level.
PAGE 341
Machine 2109 S16 Description SAN Fibre Channel Switch The IBM 2109 Model S16 is a 16-port SAN Fibre Channel Switch that is used to interconnect multiple host servers with storage servers and devices, creating a SAN.
PAGE 342
Machine Description 3534 1RU SAN Fibre Channel Managed Hub The 3534-1RU Managed Hub is used to attach network devices to fiber-based transmission systems such as Fibre Channel and gigabit Ethernet. It converts the serial electrical signals to serial optical signals and serial optical signals to serial electrical signals. The managed hub is designed for implementing multi-node server clusters and storage systems for high availability and disaster recovery solutions.
PAGE 343
9.2.2 Enterprise Fibre Channel switches and directors Machine Description 2027 140 232 Family 2027 IBM Total Storage SAN140M Director and SAN32 m-1 Switch The IBM 2027 TotalStorage SAN140M director Model 140 supports up to 140 Fibre Channel ports for open system and FICON attachment. From an initial configuration size of 16 ports, it can scale in four-port increments to 140 ports, all within 12-unit height chassis to support high-density SAN connectivity solutions.
PAGE 344
Machine Description McDATA ED-6064 Enterprise Fibre Channel Director The McDATA ED-6064 Enterprise Fibre Channel Director provides enterprise-class availability, scalable connectivity, and management capabilities for a SAN fabric. It offers high performance, full duplex, 100 Mbps, non-blocking switch performance. The Enterprise Director supports up to 64 port Fibre Channel ports for open systems and FICON attachments. Up to 16 4-port cards can be configured in the Model 064.
PAGE 345
Machine 2042 (cont.) #2010 #2020 #2030 #2210 #2220 #2235 #2280 #4001 #4002 #4008 #4009 #4128 #4129 #4256 #5010 #5020 #5022 #5210 #5220 #5221 #5224 #5605 #5625 #5701 #5704 #5705 #5706 #5707 #5910 #5920 #5924 #7201 #7202 #7203 #7600 #7603 #7604 #7610 #7621 #7625 #7800 #7801 Description 9406 models Family 2042 CNT FC/9000 Fibre Channel Director Shortwave GBIC Longwave GBIC Ext.
PAGE 346
Machine Description 2042 N16 Family 2042 CNT UltraNet Multi-service Director and Cabinet The IBM 2042 Model N16 is the CNT UltraNet Multi-service Director Model 16, the initial model offering in the UMD family, and is designed to provide fabric level hard and soft zoning, and scalability up to 16 I/O blades in an 18U rack mount director chassis. The CNT UMD Model 16 switching core is designed to provide up to 5 Terabits per second throughput, as well as protocol agnostic and link speed agnostic support.
PAGE 347
Machine Description 2062 D04 D07 Family 2062 Cisco Systems Fabric Switch MDS 9216, 9216i, 9216A and Director MDS 9509 The Cisco MDS 9506 (2062-D04) is a seven-rack-unit chassis with redundant power supplies, and requires selection of two Supervisor modules with at least one 16-Port or 32-Port Fibre Channel Line Card. The Model D04 is a multiprotocol-capable storage area network Director designed for the IT Data Center (with AC power supplies).
PAGE 348
Machine Description 2109 M12 IBM TotalStorage SAN Switch Model M12 The M12 switch supports both 1 Gbps and 2 Gbps auto-sensing ports as well as advanced fabric services that can simplify the design, administration, and management of enterprise SANs. High availability features include redundant power supplies, hot-pluggable components, and automatic path rerouting. The IBM TotalStorage SAN Switch M12 includes two 16-port switch blades, with 32 universal ports standard in a single, 14U enclosure.
PAGE 349
Machine Description 2109-M14 IBM TotalStorage SAN Switch Model M14 The IBM 2109 TotalStorage SAN Switch Model M14 is designed to support up to eight 16-port Fibre Channel switch blades enabling a single domain director with up to 128 universal (E, F, and FL), full duplex, auto-sensing ports in a single 14U enclosure. Each port is capable of self-negotiation to the highest speed supported by the attached SAN infrastructure, operating at either 1 or 2 Gbps throughput.
PAGE 350
9.3 External tape storage for iSeries and AS/400e systems The minimum operating system level for external tape storage depends on the operating system level required for the adapter. For the 3480 and 3490 Cartridge Tape Subsystems, see 9.4, “Automated tape libraries for iSeries and AS/400e systems” on page 347 for information about the associated cartridge library.
PAGE 351
Machine 3490E C10 C11 C22 C1A C2A Description Rack Mounted 3490 tape drives The 3490E is a ½-inch cartridge tape drive, which can be used for data interchange, save/restore, program distribution and alternate IPL. C10 Control Unit and tape drive (1 x 2.4 GB), attach using #2644 Magnetic Tape Attachment Card/HP only. C11 Control Unit, tape drive, and Automatic Cartridge Loader for six tape cartridge (6 x 2.4 GB) C22 Control Unit, two tape drives and Automatic Cartridge Loader for 12 cartridges (12 x 2.
PAGE 352
Machine 3490E D41 D42 Description Cartridge Tape Subsystem The Model D41 and D42 are ½-inch cartridge drives which can be used for data interchange, save/restore, program distribution, and alternate IPL. IDRC is standard. The Model D41 and D42 attach using the #2644 Magnetic Tape Attachment Card/HP or the #2604 on 9406 B models. The 3490E can be used as an automated tape library. Not supported with OS/400 V5R1.
PAGE 353
Machine 3580 and 3581 cable features Description Cable features: SCSI or Fibre cables and appropriate interposers, as required, should be ordered. #5099 #5301 #5302 #5305 #5310 #5318 #5325 #5602 #5604 #5610 #5620 #5625 #9702 #9703 #9705 SCSI: Interposer VHDCI to HD68 0.4 m HD68/HD68 SCSI cable (use to daisy-chain two tape drives on the same SCSI bus) 2.5 m (8-ft) HD68/HD68 SCSI cable 5.0 m (16-ft) HD68/HD68 SCSI cable 10.0 m (33-ft) HD68/HD68 SCSI cable 18.0 m (59-ft) HD68/HD68 SCSI cable 25.
PAGE 354
Machine Description 3590 B11 B1A IBM TotalStorage Enterprise Tape Drive Also known as the 3590 High Performance Tape Subsystem, the IBM TotalStorage Enterprise Tape Drive Models B11 and B12 are ½-inch cartridge rack mountable tape units that provide up to 17 MB per second sustained data rate and up to 10 GB capacity per cartridge (up to 30 GB when compressed). With Extended Media Support and Extended High Performance Media, capacity is up to 20 GB per cartridge (up to 60 GB when compressed).
PAGE 355
Machine 3590 B11 B1A (cont.
PAGE 356
Machine Description 9406 models 3590 E11 E1A (cont.) #2200 #3510 #5781 #9221 #9222 #9223 #9400 #9510 Other features: Deskside Enclosure Fibre Attachment - Field (#2765 or #5704 attachment only) Extended Media Support - Exx First 3590 drive in rack Second or fourth 3590 drive in rack Third 3590 drive in rack Attached to AS/400 Fibre attachment - Plant (#2765 or #5704 attachment only) The following features are required for each iSeries or AS/400 attached: #3510 Fibre Channel Attachment (Field) #5112 12.
PAGE 357
Machine Description 3590 H11 H1A (cont.) IBM TotalStorage Enterprise Tape Drive The 3590 fibre drive port requires an SC connection. The #2765 and #5704 require an LC connection. Connections on the switches and SAN components between the drive and the iSeries can be either SC or LC. #5145 #5112 #5118 #5125 #5805 #5813 #5825 #5861 #5907 #5913 #5922 #5961 #2200 #3510 #9221 #9222 #9223 #9400 #9510 9406 models Cable features: 4.5 m (15-ft) SCSI cable Maximum: Two.
PAGE 358
Machine Description 3592-J1A IBM TotalStorage 3592 Tape Drive The 3592-J1A is the follow on to the highly successful Enterprise Tape Drive 3590. The 3592 Model J1A is designed for high-performance computing environments where high reliability, capacity and performance are necessary. The 3592-J1A has a native data transfer rate of up to 40 Mbps (80 Mbps assuming 2:1 compression). It uses both 60 GB and 300 GB capacity cartridges available in both rewritable and write once read many (WORM) formats.
PAGE 359
Machine 3592 J1A (cont.) P/N 18P7534 P/N 18P7535 Description 9406 models Media Additional media is ordered against machine type 3599. 򐂰 3599-011 - The IBM 3599 Model 011 is the IBM TotalStorage Enterprise Tape Cartridge 3592 with Labeling and Initialization 򐂰 3599-012 - The IBM 3599 Model 012 is the IBM TotalStorage Enterprise Tape Cartridge 3592 with labeling only.
PAGE 360
Machine 7206 VX2 (cont.
PAGE 361
Machine 7208 222 Description 8 mm Cartridge Tape Drive 7 GB The 7208 Model 222 is a stand-alone 8 mm Cartridge tape drive providing capacity of up to 7 GB per cartridge, or 14 GB with compression, and has an effective data transfer rate of 1 Mbps when compressed (500 KB per second in native mode). It can be used for save and restore, program distribution, and alternate IPL. The 7208-222 supports the 160 m data cartridge and read/write compatible with all IBM 8 mm cartridge tape units.
PAGE 362
Machine Description 7208 342 8 mm Tape Drive (20 GB) The 7208 Model 342 is a stand-alone 8 mm cartridge tape drive providing capacity of up to 20 GB per cartridge or 40 GB with compression. It has an effective data transfer rate of 6 MB per second when compressed (3 MB per second in native mode). The Model 342 is intended for save and restore and archiving purposes. It uses the 8 mm advanced metal-evaporated (AME) data cartridges and can only read previous IBM 8 mm tape formats.
PAGE 363
Machine 9347 - 001 Description Tape Drive The 9347 is a ½-inch cartridge tape drive that records at 1600/3200 bpi. At 1600 bpi, it can be used for data interchange, save/restore, program distribution, and alternate IPL. At 3200 bpi, the capacity of a reel can approximately double for system backup/restore functions. Attaches to iSeries using the #6112 Magnetic Storage Device Controller (#6110 for 9406 B models). Maximum: Two per system Not supported with OS/400 V5R1.
PAGE 364
3490 Cartridge Tape Subsystems Machine Description 9406 models 3490 A01 A02 D31 D32 Cartridge Tape Subsystem The Model A01, A02, D31, and D32 are ½-inch cartridge drives that can be used for data interchange, save/restore, program distribution, and alternate IPL. They attach to the iSeries with the #2621 Storage Device Controller or #2644 Magnetic Tape Attachment Card/HP, #2604 for 9406 B models. The attachment of 3490 Models B02 and B04 is also supported. Cannot use enhanced capacity cartridge.
PAGE 365
3570 Cartridge Tape Subsystems Machine Description 3570 B00 B01 B11 B12 C00 C01 C02 C11 C12 3570 0.31-inch Cartridge Tape Subsystem The 3570 is a cartridge tape unit with table-top and library units based on 3590 technology. Up to 5 GB capacity per cassette (up to 15 GB when compressed) or 7 GB capacity per cassette (up to 21 GB when compressed).
PAGE 366
3570 Cartridge Tape Subsystems 3570 (cont.
PAGE 367
9427 8 mm Tape Cartridge Library (continued) #2007 #2008 #2656 #2857 #2858 #2859 Additional 10 cartridge magazine Direct attach feature allows option to configure drive 1 to attach to port 1 and drive 2 to attach to port 2 of the #2621 (SPD) adapter card to allow two concurrent data streams. System-to-device cables for additional host attachment or for dual port attachment with #2008.
PAGE 368
Options for 3494 Models L12, L22, L10 #2713 #2714 #2715 IBM TotalStorage Master Console Features The #2713, #2714, and #2715 features provide connection to an IBM TotalStorage Master Console to enable enhanced remote support to improve availability. The IBM TotalStorage Master Console can remotely monitor each attached device to determine if it is working properly and report any error alerts for the early detection of problems.
PAGE 369
#5050 Dual Active Accessor This feature must be specified to enable both accessors in attached Model HA1 Frames to be active at the same time. Maximum: One Prerequisite: Model HA1 Frames must be installed, and at least four frames (not counting the Model HA1 Frames service bays or the Model B10, B18, B20 VTS) must be installed in the 3494.
PAGE 370
#5222 Additional 32 LAN Host Attachments This feature provides an update to the microcode firmware of an installed #5046 or #9046 PCI Library Manager to support up to 64 LAN attached open system hosts. This is double the 32 LAN attached open system hosts previously available. This capability is included in the #5047 or #9047 LAN PCI Library Manager. The LAN interface can be through either the #5220 Ethernet LAN Adapter or the #5219 Token Ring Adapter.
PAGE 371
#5400 Storage Unit The #5400 provides an expansion unit for 400 additional cartridges. Attachment to the 3494-L10 is supported but attachment to the 3494-L12 requires a RPQ. Replaced by 3494 Model S10.
PAGE 372
3490, 3590, 3494 upgrades Supported field upgrades are: From 3490-C10 3490-C10 3490-C11 3490-C1A 3490-C22 3590-B11 3590-B1A 3590-B11 3590-B1A 3590-B11 3590-B1A 3590-E11 3590-E1A 3590-E11 3590-E1A 3590-H11 3590-H1A 3494-D10 3494-D10 3494-D12 3494-L10 3494-L10 3494-L12 To 3490-C11 3490-C1A 3490-C1A 3490-C2A 3490-C2A 3490-B1A 3590-B11 3590-E11 3590-E1A 3590-H11 3590-H1A 3490-E1A 3590-E11 3590-H11 3590-H1A 3590-H1A 3590-H11 3494-D12 3494-D22 3494-D22 3494-L12 3494-L22 3494-L22 withdrawn withdrawn withdrawn w
PAGE 373
3575 features Feature Description 1400 Multipath Feature with Two Magstar MP Model C Tape Drives Provides plant installation of the multipath feature and two Magstar MP Model C tape drives. Required Feature: Yes Maximum: One 1450 Multipath Feature Provides field installation of the multipath feature for 3575s manufactured, shipped, and installed prior to the availability of the #1400.
PAGE 374
3575 model matrix summary Model Capacity Capacity Cartridges Drives L06 300 GB 900 GB 60 2 L12 600 GB 1.8 TB 120 2 to 4 L18 900 GB 2.7 TB 180 2 to 6 L24 1.2 TB 3.6 TB 240 2 to 6 L32 1.6 TB 4.8 TB 324 2-6 Notes: 򐂰 14 cartridge slots can be configured for bulk I/O within the library. This reduces the maximum cartridges per library by 14 and reduces the maximum capacity of the library. 򐂰 Model L12 can be upgraded to Model L18 to increase the capacity of the library.
PAGE 375
3582 L23 (cont.) #5305 #5310 #5318 #5325 #5602 #5605 #5610 #5620 #5625 #5907 #5913 #5922 #5961 #6005 #6013 #6025 #6061 Cable features (cont.): 5.0 m (16-ft) HD68/HD68 SCSI cable 10.0 m (33-ft) HD68/HD68 SCSI cable 18.0 m (59-ft) HD68/HD68 SCSI cable 25.0 m (82-ft) HD68/HD68 SCSI cable 2.5 m (8-ft) VHDCI/HD68 SCSI cable 5.0 m (16-ft) VHDCI/HD68 SCSI cable 10.0 m (33-ft) VHDCI/HD68 SCSI cable 20.0 m (66-ft) VHDCI/HD68 SCSI cable 25.
PAGE 376
3583 Lxx (cont.) 3583-Lxx Ultrium Scalable Tape Library and might be added to existing libraries as an MES. It is a required feature for all libraries containing an Ultrium 2 Tape Drive. The RMU/Specialist must be installed to add multipath support. The RMU/Specialist function is included on every 3583 shipped since 27 July 2001. Machines shipped prior to 27 July 2001 must have #1660 RMU/Specialist installed.
PAGE 377
3583 Lxx (cont.) 3583-Lxx Ultrium Scalable Tape Library #5961 #6005 #6013 #6025 #6061 Cable features (cont.): 61 m SC-LC Fibre Channel Cable 5 m LC-LC Fibre Channel Cable 13 m LC-LC Fibre Channel Cable 22 m LC-LC Fibre Channel Cable 61 m LC-LC Fibre Channel Cable #8001 #8002 #8101 #8010 #8013 #8110 Cartridge/supply features: Available only with initial order.
PAGE 378
3584 L22/D22 (cont.
PAGE 379
3584 L22/D22 (cont.) #5961 #6005 #6013 #6025 #6061 #9700 3584-L22/D22, continued Cable features (cont.) 61 m SC-LC Fibre Channel Cable 5 m LC-LC Fibre Channel Cable 13 m LC-LC Fibre Channel Cable 22 m LC-LC Fibre Channel Cable 61 m LC-LC Fibre Channel Cable No host cables from the plant An interposer might be required for attachment to various server adapters. #8802 #8820 3584 cartridge features Available only with initial order.
PAGE 380
3584 L52/D52 L32/D32 (cont.) #0500 #1462 #1658 #1659 #1663 #1665 #1690 #1802 #1806 #1814 #1816 #1901 #2710 #2711 #2712 #9002 #9003 #9316 #9660 #1641 3584-L52/D52/L32/D32 Ultrium Scalable Tape Library, continued The ALMS provides the next generation IBM Multipath Architecture. It provides a license key to enable dynamic management of cartridges, cartridge storage slots, tape drives, and logical libraries. Tape drives can be assigned to any logical library using a Web user interface.
PAGE 381
3584 L52/D52 (cont.) #6005 #6013 #6025 #6061 #1462 #1501 #1607 #1608 #1657 #1660 #1662 #1663 #1665 #1690 #1802 #1806 #1814 #1816 #1901 #2710 #2711 #2712 #9002 #9003 #9660 3584-L52/D52 Cable features (cont.
PAGE 382
3584 L52/D52 L32/D32 (cont.) 3584-L32/D32 Capacity Expansion Feature (cont.) The 3584-L52 or D52 Ultrascalable Tape Library frame contains a maximum of 12 Fibre Channel attached LTO-2 for a total of 192 tape drives in 16 frames. A maximum of 32 drives can be attached to any one AS/400 or iSeries. For drive support greater than 32 drives, the multiple library definitions and library partitions must be configured.
PAGE 383
3584 model matrix summary Library control unit model Cartridge capacity (max)1 Flexible growth Tape drive supported 3584 - L22 260 (starting minimum 58) 1-192 drives 1-16 frames1 3592-J1A 3584 - L52 287 (starting minimum 64) 1-192 drives 1-16 frames2 LTO-23 3584 - L32 281 (starting minimum 141) 1-192 drives 1-16 frames2 LTO-1, LTO-2 Drive unit model Cartridge capacity (max) Number of tape drives Tape drive supported 3584 - D22 400 0 3592-J1A 383 1-4 371 5-8 360 9-12 440 0 422
PAGE 384
9.5 External tape rules for iSeries and AS/400e systems 9.5.1 High workload placement rules for magnetic media IOP SPD disk unit, tape, and some LAN IOPs are considered high workload IOPs. Therefore, they require special consideration when configuring an iSeries or AS/400e system. In addition, their workload capability IOPs can be streaming or non-streaming. The following table lists the high workload SPD magnetic media IOPs. It identifies the bus capacity as streaming or non-streaming.
PAGE 385
If you use this function, the system uses existing support (a device on the first system bus) to install or recover enough of the Licensed Internal Code (LIC) required to perform an IPL with IPL-type D. Then, using the new alternate installation device support, the system continues the operation using media in the alternate installation device.
PAGE 386
9.5.4 #5712, #5715, #5702, #5705, #2718, and #2768 PCI Magnetic Media Controller: Device cabling rules The #2718, #2768, #5702, #5705, #5712, and #5715 provide Ultra SCSI attachment capability for an external tape, an external CD-ROM device, or an external DVD-RAM device that have a Single Ended SCSI interface. The #5702 PCI-X Ultra Tape Controller and #5712 PCI-X Tape/DASD Controller have two SCSI ports, each port providing the same attachment capability of the #2718, #2768, #5705 and #5715.
PAGE 387
The #0120 7210-020 Attachment Specify is required for each 7210-020 External CD-ROM drive to be connected directly (not daisy-chained) to the system with a #2718, #2768, #5702, or #5705. Note: If the 7210-020 is to be daisy-chained with another external device, this specify code must not be present.
PAGE 388
9.6 External optical storage for iSeries and AS/400e systems Machine 3995 #1403 #1413 #1440 #1442 #1443 #1444 #9400/ #7400 #7402 #9401 #7401 #7403 Description Optical Library Dataserver OS/400 software is required to support 3995-Cx0 with up to four internal 2.6 GB drives: 򐂰 OS/400 V3R6 with Group PTF SF99087 or OS/400 V3R7. 򐂰 OS/400 V3R2 with 5755-AS3 #1979 and PRPQ 5799-XBW specify code #3520 Models C4x with up to four internal 5.
PAGE 389
Machine Description 9406 models 7210 025 7210-025 External DVD-RAM The 7210-025 External DVD-RAM is a DVD-RAM device that attaches to the #2718 PCI Magnetic Media Controller, #2768 PCI Magnetic Media Controller, #5702 PCI-X Ultra Tape Controller or #5705 PCI-X Tape/DASD Controller. The 7210-025 can be used as an alternate IPL device but is not supported by the Boot Manager. The media capacity for a DVD-RAM cartridge is 4.7 GB per side versus 650 MB on CD-ROM. Its highest capacity can be as much as 9.
PAGE 390
9.7 External SCSI and Fibre Channel tape and optical cable part numbers for iSeries and AS/400e systems The following tables provide cable part number for SCSI and Fibre Channel attached devices. Part numbers might not be available in all countries or regions. Note: The length in feet is rounded to the nearest whole number.
PAGE 391
SCSI cables for #2729 PCI Magnetic Media Controller, #2749 PCI Ultra Magnetic Media Controller, and #6534 Magnetic Media Controller Tape drive Length Part number Feature code 3995 - C4x 12.0 m (39 ft) 12.0 m (39 ft) (for #2621 attach only) 05H5543 05H5439 7401/9401 7400/9400 7208 - 012 1.5 m (5 ft) 4.0 m (13 ft) 12.0 (39 ft) 52G0174 59H3462 59H3463 2871 2903 2904 7208 - 222/ 232/234 9348 - 001/002 1.0 m (3 ft) 4.0 m (13 ft) 12.0 m (39 ft) 06H6037 59H3460 59H3461 2875 2901 2902 7208 - 342 4.
PAGE 392
SCSI cables for #5715/#5705 PCI-X Tape/DASD Controller (one port) and #5712/#5702 PCI-X Ultra Tape Controller (two ports, VHDCI interface) Tape drive Length Part number Feature code 3580-L23 3582 Drives #8103, #8203 3583 Drives #8103 2.5 m (8 ft) (VHDCI to HD68) 4.5 m (14.5 ft) (VHDCI to HD68) 10.0 m (33 ft) (VHDCI to HD68) 20.0 m (66 ft) (VHDCI to HD68) 25.
PAGE 393
Fibre Channel cables for #5704 PCI-X Fibre Channel Tape Controller (LC) and #2765 PCI Fibre Channel Tape Controller (LC) Tape device Length Part number Feature code 3581-F28 5 m (16 ft) Fibre Channel (LC-LC) 25 m (82 ft) Fibre Channel (LC-LC) 61 m (200 ft) Fibre Channel (LC-LC) 7 m (23 ft) Fibre Channel (LC-SC) 22 m (72 ft) Fibre Channel (LC-SC) 61 m (200 ft) Fibre Channel (LC-SC) CRU* #6005 #6025 #6061 #5907 #5922 #5961 3582 Drives #8105, #8205 5 m (16 ft) Fibre Channel (LC-LC) 13 m (43 ft) Fibre
PAGE 394
9.8 QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems The following table provides device specifications, performance, and compatibility details for internal tape formats (QIC and VXA-2). MLR1 QIC 5010 DC MLR3 SLR 60 SLR 100 VXA-2 IBM tape device QIC2 GB QIC2 GB DC 4/8 GB SLR5 QIC4G DC MLR1 QIC 5010 DC Drive storage capability 2.5 GB4 2.
PAGE 395
IBM tape device QIC2 GB QIC2 GB DC 4/8 GB SLR5 QIC4G DC MLR1 QIC 5010 DC MLR1 QIC 5010 DC MLR3 SLR 60 SLR 100 VXA-2 Drive storage capability 2.5 GB4 2.
PAGE 396
9.9 Diskette device storage for iSeries and AS/400e systems Machine Model Description 9406 models 5 ¼-inch Diskette Drive The #6135 allows interchange of data between the iSeries and other 9404, 9406, 5360, 5362, 5381, and 5382 systems. It attaches using #6146 Diskette Adapter or to the MFIOP using the #6147 Diskette Adapter (3x0 and 50S, 53S, 500, 510, 530 only).
PAGE 397
10 Chapter 10. Customer Card Identification Numbers cross reference This chapter lists the Customer Card Identification Number (CCIN), feature code, for many iSeries and AS/400e features. It assists IBM Clients and personnel in configuring Miscellaneous Equipment Specifications (MES) and upgrades. It provides a cross reference for the CCIN number that is reported by the Hardware Resources Listing with a feature code used for ordering. The CCIN number is used when working from a Hardware Resource Listing.
PAGE 398
Feature Code Cross Reference CCIN 0150 0151 0152 0297 0298 0446 0446 0446 0447 0447 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1531 1532 1533 1534 1535 1536 1537 1540 1541 1542 1543 1544 1545 1546 1547 1548 1576 1577 1578 1579 1581 # Feature code description 0150 820 Base Processor 0151 820 Base Processor 0152 820 Base Processor 0297 Model 250 Package - 2295 0298 Model 250 Package - 2296 0446 512 MB DDR Server Mem
PAGE 399
Feature code description 2398 820 (3200 CPW) with #1521 Interactive 2398 820 (3200 CPW) with #1522 Interactive 2398 820 (3200 CPW) with #1523 Interactive 2398 820 (3200 CPW) with #1524 Interactive 2398 820 (3200 CPW) with #1525 Interactive 2398 820 (3200 CPW) with #1526 Interactive 2398 820 (3200 CPW) with #1527 Interactive 2400 830 (1850 CPW) with #1531 Interactive 2400 830 (1850 CPW) with #1532 Interactive 2400 830 (1850 CPW) with #1533 Interactive 2400 830 (1850 CPW) with #1534 Interactive 2400 830 (1850
PAGE 400
Feature Code Cross Reference CCIN 24B4 24B5 24B8 24B9 24BA 24BB 24BC 24BD 24BE 24C0 24C1 24C2 24C3 24C4 24C5 24C6 24C8 24C9 24CA 24CB 24CC 24CD 24CE 24D0 24D1 24D2 24D3 24D4 24D5 24D6 24D7 24D8 24D9 24DA 24DB 24DC 24DD 24DE 241F 249D 2515 2516 2523 2525 2528 2530 2531 2533 2534 2536 2537 2539 2540 2541 2542 2543 2544 2552 2553 # Feature code description 2437 Model 820 Processor with #1525 2437 Model 820 Processor with #1526 2438 Model 820 Processor with #1521 2438 Model 820 Processor with #1522 2438 Mode
PAGE 401
Feature code description 2634 16/4 Mbps Token-Ring Adapter 2636 16/4 Mbps Token-Ring Adapter 9144 ASCII Workstation Controller 9150 Std MFIOP/ASCII WSC 9147 Std MFIOP/ASCII WSC 9146 Std MFIOP/TWINAXIAL WSC 2644 Magnetic Tape Attachment Card/HP 2647 9348 Model 2 Tape Attachment 9651 Storage Device Controller 8609 EIA 232/V.24 2-Line 9609 Std EIA 232/V.
PAGE 402
CCIN 2745 2745 2745 2745 2746 2746 2746 2748 2748 2748 2748 2749 2750 2750 2751 2751 2754 2754 2754 2754 2755 2755 2757 2757 2758 2758 2758 2758 2759 2759 2760 2760 2761 2761 2763 2763 2765 2765 2766 2766 2767 2768 2771 Feature Code Cross Reference 2773 2772 2772 2772 2776 2778 2778 # Feature code description 4745 PCI 2-line WAN IOA 2745 PCI 2-Line WAN IOA 9745 Base PCI 2-Line WAN IOA 0398 Operations Console Package 4746 PCI Twinaxial IOA 2746 PCI Twinaxial Workstation IOA 9746 Base PCI Twinaxal IOA 060
PAGE 403
CCIN 283F 283F 2842 2843 2843 2844 2844 2849 2849 2849 CCIN 28CD 28CD 28D8 28DB 28EB 28EF 28F6 28F7 292C 292D 292E 292E 2A6A 2A6B 2A6C 2A6D 2A6E 2A6F 2B6A 2B6B 2B6C 2B6D 2B6E 2B6F 2C6A 2C6B 2C6C 2C6D 2C6E 2C6F 2D6A 2D6B 2D6C 2D6E 2E6A 2E6B Feature code description 7136 DASD Expansion Unit - 6 slot 7137 DASD Concurrent Maintenance Cage 7818 HSL-2/RIP-G 2-Ports Copper 9531 Base HSL-2 Bus Adapter 7819 HSL/RIO 2-Ports Optical 0632 USB 2.
PAGE 404
CCIN 2E6C 2E6D 2E6E Feature Code Cross Reference 2D6D 3001 3002 3002 3002 3003 3004 3004 3005 3005 3006 3006 3007 3007 3009 3015 3016 3017 3018 3020 3021 3022 3024 3025 3026 3027 3029 3032 3033 3034 3035 3036 3042 3043 3044 3045 3046 304E 3054 3055 3060 3061 3092 3093 3094 3095 3096 309D 309E 309F 30AA 30B3 # Feature code description 2070 4550 CPW Model 740 Processor with #1511 Interactive Feature 2070 4550 CPW Model 740 Processor with #1512 Interactive Feature 2070 4550 CPW Model 740 Processor with #15
PAGE 405
Feature code description 9252 Std 32 MB Main Storage 3153 64 MB Main Storage 8253 Opt Base 64 MB Main Storage 3154 128 MB Main Storage 8254 Opt Base 128 MB Main Storage 9254 Std 128 MB Main Storage 3155 256 MB Main Storage 8255 Opt Base 256 MB Main Storage 7255 Opt Base 256 MB Main Storage 9156 Std 64 MB Main Storage 4156 64 MB Main Storage 3156 64 MB Main Storage 8156 Opt Base 64 MB Main Storage 4157 128 MB Main Storage 7157 Opt Base 128 MB Main Storage 8157 Opt Base 128 MB Main Storage 3157 128 MB Main St
PAGE 406
CCIN 5702 5702 5702 5702 5703 5703 5704 5704 5706 Feature Code Cross Reference 5706 5707 5708 5708 5709 6040 6041 6050 6050 6053 6054 6100 6100 6102 6103 6103 6104 6104 6105 6105 6105 6105 6105 6107 6107 6107 6107 6107 6107 6109 6109 6109 6109 6109 6109 6109 6109 6109 6109 6110 6110 6111 6111 6112 6122 6140 # Feature code description 5705 PCI-X Tape/DASD Controller 0624 - Direct Attach - #5702 PCI-X Ultra Tape Controller 5702 PCI-X Ultra Tape Controller 5712 PCI-X Tape/DASD Controller 0628 - Direct Atta
PAGE 407
Feature code description 6344 2.5 GB ¼-in Cart Tape 8344 2.5 GB ¼-in Cart Tape 7344 2.5 GB ¼-in Cart Tape 6345 13 GB ¼-in Cart Tape 8345 13 GB ¼-in Cartridge Tape 6346 120 MB ¼-in Cart Tape 9347 Std 525 MB ¼-inch Tape 7347 Base Tape Upgrade (525 MB) 8347 525 MB ¼-in Cart Tape 6347 525 MB ¼-in Cart Tape 8348 1.2 GB ¼-in Cart Tape 9348 Std 1.2 GB ¼-inch-inch Tape 7348 1.2 GB ¼-in Cart Tape 5348 Base Tape Replace (1.2 GB) 6348 1.2 GB ¼-in Cart Tape 8349 2.5 GB ¼-in Cart Tape 7349 2.5 GB ¼-in Cart Tape 6349 2.
PAGE 408
Feature Code Cross Reference CCIN 6602 6602 6602 6602 6602 6602 6603 6603 6603 6603 6603 6603 6603 6603 6603 6603 6603 6603 6603 6603 6605 6605 6605 6605 6605 6605 6605 6606 6606 6606 6606 6606 6606 6606 6606 6606 6606 6607 6607 6607 6607 6607 6607 6607 6607 6607 6607 6607 6607 6607 6607 6616 6617 6617 6713 6713 6713 6713 6713 # Feature code description 9602 Standard 1.0 GB Disk Unit 1203 Single Disk Unit (1031 MB) Kit 4211 Addt Disk Unit (1.031 GB) 8612 Base 2.
PAGE 409
11 Chapter 11. Feature code cross reference This chapter lists the feature code, Customer Card Identification Number (CCIN), and description for many iSeries and AS/400e features. It assists clients and IBM personnel in configuring Miscellaneous Equipment Specifications (MES) and upgrades. It provides a cross reference for the feature code that is used for ordering with a CCIN number reported by the Hardware Resources Listing. The listing in this chapter is sorted by feature code.
PAGE 410
Feature Code Cross Reference Feat.
PAGE 411
CCIN Description n/a n/a 5706 5707 5702 n/a 5094 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 6105 6107 6109 6105 6107 6109 6602 6603 6605 6606 6607 6109 6602 6603 6602 6603 6378 6379 6380 6380 6390 6335 1307 1308 6602 6603 6602 6603 ESCON Controller Unit PCI Ultra-3 RAID Adapter Linux Dir Attach-5706 Linux Dir Attach-5707 Direct Attach 5712 Direct Attach 5716 5094 Equivalent 4328 Load Source Specify iSeries Server 2463 iSeries Server 2463 iSeries Server 246
PAGE 412
Feature Code Cross Reference Feat.
PAGE 413
CCIN Description 2D6A 2068 2C6F 2068 2C6C 2068 2C6E 2068 2068 241D 2C6D 2069 2D6B 2069 2D6D 2069 2D6E 2069 2069 241B 2D6C 2070 2E6B 2070 2E6A 2070 2E6C 2070 2E6D 2070 2E6E 2070 2159 2160 2164 2176 2183 2207 2208 2248 2248 2250 2250 2250 2252 2252 2252 2253 2253 2253 2289 2290 2291 2292 2295 2296 2298 2299 2315 2316 241B 2159 2160 2164 2176 2183 2207 2208 22A2 2248 22A5 22A4 2250 2252 22A8 22A7 2253 22AB 22AA 2289 2290 2291 2292 2295 2296 2290 2291 2315 2316 2890 CPW Model 730
PAGE 414
Feature Code Cross Reference Feat.
PAGE 415
CCIN Description 24B2 24B4 2437 24B3 24BD 24BC 24BE 24BB 24B8 24B9 24BA 2438 25BA 2452 2454 2456 2457 2458 26D6 2461 26D2 2461 26D4 2461 26D5 2461 26D0 2461 26D7 2461 26D8 2461 2461 2461 26D1 2515 2516 2523 2525 2528 2530 2533 2534 2536 2537 2539 2540 2541 2542 2543 2544 2552 2553 2554 2555 2556 2557 2558 2559 2515 2516 2523 2525 2528 2530 2533 2534 2536 2537 2539 2540 2541 2542 2543 2544 2552 2553 2554 2555 2556 2557 2558 2559 Model 820 Processor with #1523 Model 820 Processor with #1525
PAGE 416
Feature Code Cross Reference Feat.
PAGE 417
CCIN Description 2860 2861 2862 2863 n/a 2864 2864 2850 2850 2867 2850 n/a 2881 2884 2886 2887 2890 2890 2892 2895 2896 2897 2890 n/a n/a n/a n/a n/a n/a n/a n/a n/a 3002 3001 3002 3003 3004 3005 3006 3007 3009 3015 3016 3017 3018 3020 3021 3022 3024 3025 3026 3027 3029 3032 3033 3034 3035 3036 16 MB IOP Memory 32 MB IOP Memory 128 MB IOP Memory 8 MB Addtnl Cache Memory Cable, Artic960HX 32 MB Addtnl Cache Memory Cable, Artic960HX PCI Integ Netfinity Server PCI Integ Netfinity Server 256 MB IOP Memory PC
PAGE 418
Feature Code Cross Reference Feat.
PAGE 419
CCIN Description 6606 6607 6321 6330 6336 6333 6603 6602 63A0 63A0 63A0 63A0 63A0 63A0 n/a n/a n/a n/a 2892 2723 2745 2746 2748 2750 2751 2761 2778 4758 4758 4758 2058 2892 4812 4812 4812 2815 2816 2818 2838 n/a n/a n/a n/a 4961 4962 n/a 5033 5034 5035 5066 5078 5079 5088 5094 5102 5103 5104 5105 Single Disk Unit (1967 MB) Addt Disk Unit (4.194 GB, reg) CD-ROM DVD-RAM DVD-ROM DVD Additional Disk Unit (1.
PAGE 420
Feature Code Cross Reference Feat.
PAGE 421
CCIN Description 6535 28D2 n/a 28F7 28F6 292E 292D 6601 6602 6603 6605 6606 6607 6602 6603 6616 6617 6617 6603 6602 6601 6713 6714 6717 6718 6750 6752 6753 6602 6606 6607 6602 6713 6717 6718 6714 6831 6606 6607 7104 283F 28BC 283F 7128 7130 283F 3135 28CD 28CD 3157 3158 9174 9175 3186 3187 n/a 3155 3163 SSA RAID Disk Unit Controller 4-Disk Slot Exp - Base Ctlr Optional Rack Security Kit 4-Disk Slot Exp - PCI-X Ctlr 4-Disk Slot Exp - Base Ctlr 4-Disk Slot Exp - PCI-X Ctlr 4-Disk Slot Exp-PCI-X Ctlr Single
PAGE 422
Feature Code Cross Reference Feat.
PAGE 423
CCIN Description 3190 9211 9212 9215 3131 3132 3134 9243 6149 3152 3154 3162 3163 3166 3172 6180 3172 9301 3104 6713 6341 6342 6343 6347 6348 6380 6181 6517 28E7 6320 6529 n/a 2584 2585 6601 6602 6605 6606 2654 2612 2617 2619 2623 2624 2651 6602 63A0 2673 2691 2696 2699 6605 6607 2720 2721 2723 2724 0446 Base 256 MB Main Storage 60 m SPCN Optical cable 100 m SPCN Optical cable 60 m SPCN Copper Cable Optional Base 64 MB Main Storage Optional Base 128 MB Main Storage Std 128 MB Main Storage 400W Availabili
PAGE 424
Feat. code 9887 9904 9907 9927 9928 9929 9930 9943 9980 CCIN Description 2887 4104 6607 9927 9928 9929 9930 2843 9980 Base HSL-2 Bus Adapter 4 MB Main Storage Base 4.19 GB Disk Unit Channel Box and cable 1.7 m attach cable 6.6 m attach cable 24.0 m attach cable Base PCI IOP Serpentine Cable Connector * As of January 2000, level 3 microcode fixes for these Feature Code Cross Reference adapters are no longer provided. There are no further microcode changes for these components.
PAGE 425
12 Chapter 12. Software for IBM iSeries and AS/400e systems IBM OS/400 Version 5, Version 4, and some Version 3 releases (specifically OS/400 V3R7 and V3R6) support reduced instruction set computing (RISC)-based processors. OS/400 V5R2 supports all RISC processors except the 5xx and 4xx models. This chapter covers the OS/400 and related software information for all software releases supporting the RISC processors documented in this IBM Redpaper.
PAGE 426
12.1 Minimum OS/400 software level requirements for iSeries and AS/400e hardware The following tables identify the minimum operating system software release required for IBM iSeries and AS/400e models. The Model 270, for example, has a minimum release of OS/400 V4R5. Many of the feature codes that are supported in these processors by earlier releases of OS/400 than the processor itself are also represented.
PAGE 427
OS/400 V4R2 OS/400 V4R3 OS/400 V4R4 9406-170 models 7207-122 QIC-SLR Tape Bridge Box (4 GB External ¼-inch Cartridge Tape Drive) #0222 100/10 Mbps Ethernet on IPCS #0295 Performance Enhancement / 28 Workstations #0325 IPCS Extension Cables for NT #1334 2-byte 17.
PAGE 428
OS/400 V4R5 OS/400 V5R1 OS/400 V5R2 9406-250 #0295, #0296, #0297, #0298 Processors 9406-270 #2248, #2250, #2252, #2253 Processors 9406-270 #2422, #2423, #2424 DSD Processors 9406-820 #2395, #2396, #2397, #2398 Processors 9406-820 #2425, #2426, #2427 DSD Processors 9406-830 #2400, #2402, #2403 Processors 9406-840 #2416, #2417, #2418, #2419, #2420 Processors 9406-SB2 #2315 Processors 9406-SB3 #2316, #2318 Processors #146x HSL Cables #146x SPCN Cables #15xx Interactive features for 270 and 8xx #2743 1 Gbps
PAGE 429
OS/400 V4R5 OS/400 V5R1 OS/400 V5R2 (cont.
PAGE 430
12.2 OS/400 general availability and support The following table shows the availability, withdrawal, and end of support dates for each release of the operating system. Note that OS/400 V5R2 is the supported level of operating system for the iSeries server. All earlier releases of OS/400 have been withdrawn from IBM marketing and support. Release 414 General availability Withdrawn from marketing End of program support R7.5 SSP 08 March 1996 09 February 1999 31 May 2000 V3R0.
PAGE 431
12.3 OS/400 upgrade paths The following table shows the valid upgrade paths for OS/400. To: From: V4R1 ** V3R2 X V3R6 X - - - - V3R7 X X X - - X X X X - X X X - X X - X X * V4R1 V4R2 ** X V4R3 ** * X V4R2 V4R4 ** * X V4R3 * V4R4 V4R5 V4R5 ** X * V5R1 ** V5R2 ** - X V5R1 X X V5R2 * ** OS/400 V4R5 is the last release to offer single-step CISC-to-RISC upgrade capabilities from V3R2. Withdrawn from IBM support.
PAGE 432
12.5 Software Inventory Tool The Software Inventory Tool is available to assist in planning and ordering software upgrades for iSeries servers with OS/400 Version 5 or Version 4 installed.
PAGE 433
12.7 OS/400 V5R2 software The following tables show the V5R2 OS/400-based software products that are most commonly installed. It is not a definitive list of all iSeries software products now available. See 12.9, “Notes for Version 5 software tables” on page 428, for Version 5 software group information.
PAGE 434
OS/400 complementary database software Skip ship2 Product identifier HIPO feature (5372-IS5)2 DB2 Table Editor for iSeries Version 4.3 P 5697-G84 --- S DB2 Web Query Tool for iSeries Version 1.3 P 5697-G85 --- S DB2 Intelligent Miner™ for Data V6.1 P 5733-IM3 --- M iSeries ODBC Driver for Linux --- 5733-LO1 --- S DB2 OLAP Server™ for iSeries V7.
PAGE 435
Skip ship2 Product identifier HIPO feature2 (5372-IS5) Cryptographic Access Provider 128-bit6 --- 5722-AC3 1017 MQSeries® for iSeries Version 5.26 P 5733-A38 --- Host On-Demand Version 6.0 P 5733-A59 --- M iSeries Client Encryption (128-bit)6 --- 5722-CE3 1019 S --- 5722-CM1 1003 --- 5722-CR1 1020 S P 5769-DC1 1023 S DCE DES Library Routines for AS/4006 P 5769-DC3 1024 S Communications Server for Windows NT Version 6.
PAGE 436
Systems management products Skip ship2 Product identifier Intelligent Communications Trace Analyzer for iSeries, Version 1.0 New 5733-AZ1 --- 5722-BR1 Backup Recovery and Media Services for iSeries6 Network Feature Advanced Feature PATROL for iSeries – Predict HIPO feature2 Keyed stamped media9 Software subscription or maintenance8 1002 5050 5101 5102 S 1507 New 5620-FIF --- S --- 5698-ISE --- --- Tivoli Storage Manager V5.
PAGE 437
Application development products Skip ship2 Product identifier --- Options 31-35 --- Options 41-45 ILE C++ for AS/400 --- Options 52, 54 ILE C for AS/4006 --- Options 51, 53 XML Toolkit for iSeries P 5733-XT1 --- Skip ship2 Product identifier HIPO feature2 Keyed stamped media9 Software subscription or maintenance8 Advanced Function Printing™ Utilities for AS/4006 --- 5722-AF1 1001 5050 S AFP™ PrintSuite for AS/4006 APU Advanced Print Utility PPFA Page Printer Formatting Aid AF3 S
PAGE 438
Additional and packaged products Skip ship2 Product identifier HIPO feature2 Host Access Client Package for iSeries, Version 3.0 Personal Communications V5.6 Screen Customizer Version 1.0.70 WebSphere Host On-Demand V7.0 5733-A78 --- Host Access Client Package for multiplatforms, Version 3.0 Personal Communications V5.6 Screen Customizer V2.0.70 WebSphere Host On-Demand V7.
PAGE 439
12.8 OS/400 V5R1 software The following tables show the V5R1 OS/400-based software products that are most commonly installed. It is not a definitive list of all possible IBM software products for the iSeries or AS/400e. See 12.9, “Notes for Version 5 software tables” on page 428, for Version 5 software group information.
PAGE 440
OS/400 complementary database software Skip ship2 Product identifier HIPO feature (5372-IS5)2 Keyed stamped media9 Software subscription or maintenance8 DCE Base Services 5769-DC1 1023 S DCE DES Library Routines 5769-DC3 1024 S DB2 Universal Database Extenders for iSeries V7.2 --- 5722-DE1 --- 5050 S DB2 DataPropagator for iSeries Version 7.
PAGE 441
Networking products Skip ship2 Product identifier HIPO feature2 (5372-IS5) MQSeries Integrator for iSeries (V5R1) --- 5697-F49 --- S iSeries Access for Windows --- 5722-XE1 --- S Skip ship2 Product identifier HIPO features2 WebSphere Standard Edition6 (V5R1) 9 5733-AS3 --- S Connect for iSeries (V5R1) 9 5733-B2B --- S 9 5733-WA3 6002 S WebSphere Advanced Edition V4.0.16 --- 5733-WA4 6000 S WebSphere Advanced Edition Single Server V4.0.
PAGE 442
Application development products Skip ship2 Product identifier HIPO feature2 WebSphere Commerce Suite, Pro Edition for iSeries, Version 5.
PAGE 443
Additional and packaged products Skip ship2 Product identifier HIPO feature2 Keyed stamped media9 Software subscription or maintenance8 Lotus Enterprise Integrator for iSeries6 9 5769-LNP --- S Lotus Domino Enterprise Server for iSeries 9 5769-LNT 6001 S CISC to RISC Upgrade Kit 5798-TBU --- ValuPak for V5R1: 5722-SS1: OS/400 5722-SS1: 1-45 ipm feature 5722-XW1: Client Access Family/iSeries Access 5722-QU1: Query 400 5722-ST1: DB2/400 Query Manager and SQL Development Kit 5722-PT1: Perfor
PAGE 444
12.9 Notes for Version 5 software tables Note 1 V5 is supported on the following AS/400e RISC models only. See the overview table in the model chapters for the minimum OS/400 release to support each model. 򐂰 9401-150 (V5R1 does not support 5649-nnn products. 5722-nnn programs in group P05 support the 9401-150.
PAGE 445
Note 4 Alternate IPL Device Feature Codes: The following feature codes are hardware features. They are used to specify which storage device is to be used as an alternate IPL device.
PAGE 446
Note 8 S = Software Subscription M = Software Maintenance New versions and updates to these products are covered by one of these two methods. “S” indicates that the product is on the Eligible Products List for Software Subscription. Clients must purchase Software Subscription when they move to Version 4 or higher to upgrade to new versions or releases. Software Subscription is available at prepaid options of one or three years.
PAGE 447
12.10 OS/400 V4R5 software The following tables show those V4R5 OS/400-based software products that are most commonly installed. It is not a definitive list of all possible IBM software products for the iSeries or AS/400e. See 12.14, “Notes for Version 4 software tables” on page 450, for Version 4 software group information.
PAGE 448
WDFM11 Networking products Skip ship2 Product identifier Stack feature2 Addn’l feature2 Keyed stamped media9 Software subscription8 Cryptographic Access Provider 40-bit6††† 7/2002 5769-AC1 #2560 - 9 Cryptographic Access Provider 56-bit6†††† 7/2002 5769-AC2 #2561 - 9 128-bit6,12 7/2002 5769-AC3 #2562 - 9 AS/400 Client Encryption (40-bit)6††† 7/2002 5769-CE1 #2580 - 9 (56-bit)6†††† 7/2002 5769-CE2 #2581 - 9 AS/400 Client Encryption (128-bit)6,12 7/2002 5769-CE3 #2582
PAGE 449
WDFM11 Networking products Skip ship2 Product identifier Stack feature2 Addn’l feature2 Keyed stamped media9 Software subscription8 Network Station Browser (128-bit encryption) †† 9 5648-B18 - - - Navio NC Navigator for IBM Network Station (128-bit encryption) †† 9 5648-B20 - - - Addn’l feature2 Systems management products Backup Recovery and Media Services for OS/4006 WDFM11 Skip ship2 Product identifier Stack feature2 7/2002 9 5769-BR1 #2521 Advanced Feature Network AS/4006
PAGE 450
Application development products WDFM11 Skip ship2 Product identifier Stack feature2 Addn’l feature2 Keyed stamped media9 Application Dictionary Services Feature7 9 #2612 5102 Application Development Manager Feature7 9 #2613 5101 5050 ILE RPG for AS/4006 7/2002 9 Software subscription8 9 5769-RG1 #2512 - 5769-VG1 #2577 - 9 9 5798-NC3 - - - 9 5733-PY2 - - 9 WDFM11 Skip ship2 Product identifier Stack feature2 Addn’l feature2 Keyed stamped media9 Software subscription
PAGE 451
WDFM11 Skip ship2 Product identifier Connect for iSeries 1/2003 9 5733-B2B 9 Lotus Domino Enterprise Server for AS/4006 1/2003 5769-LNT - Lotus Enterprise Integrator6 1/2003 5769-LNP - System/38™ Migration Aid 9 5714-MG1 - - - System/36 Migration Aid 9 5727-MG1 - - - Additional products Stack feature Addn’l feature Keyed stamped media9 Software subscription8 12.
PAGE 452
WDFM11 Database products Skip ship2 Product identifier Stack feature2 9 Integration for Novell NetWare Addn’l feature2 #2646 Private Address Space Environment #2648 Integration for Windows NT Server #2692 DB2 Symmetric Multiprocessing #2698 DB2 MultiSystem #2699 S/38 Utilities for AS/4006 6 Software subscription8 #2645 Enhanced Integration for Novel NetWare Cryptographic Support for AS/4006 Keyed stamped media9 9 5769-CR1 #2518 - 9 9 5769-DB1 #2519 - 9 5769-DP2 #2552 Data
PAGE 453
WDFM11 Networking products Skip ship2 Product identifier Stack feature2 Addn’l feature2 Keyed stamped media9 Software subscription8 DOS Client DOS Extended Client - OS/2 Client Optimized OS/2 Client Windows 3.
PAGE 454
WDFM11 Systems management products Addn’l feature2 Keyed stamped media9 Spool File Archive #2694 5101 Record Level Archive #2695 5103 Object Level Archive #2696 5102 Anystore #2697 5104 SystemView® System Manager for OS/4006 Netfinity Server for AS/4006 Skip ship2 Product identifier Stack feature2 Software subscription8 9 5769-SM1 #2533 - 9 9 5769-SVA #2536 - - V3R76 9 5769-SVD #2537 - - Netfinity AS/400 Manager for Windows 95 V3R76 9 5769-SVE #2538 - - ADSTAR Dist
PAGE 455
Application development products WDFM11 Skip ship2 Product identifier Stack feature2 VisualAge C++ for Windows Client CICS Transaction Server for AS/4006 Addn’l feature2 Keyed stamped media9 #2620 9 Application Program Driver for AS/400 9 Application Development ToolSet for AS/4006 9 9 5769-DFH #2545 - 9 5769-PD1 #2557 - 9 5769-PW1 #2526 5050 Application Dictionary Services/4007 #2612 5102 Application Development Manager/4007 #2613 5101 5050 AS/4006 Software subscription8 9
PAGE 456
12.12 OS/400 V4R3 software The following tables show the V4R3 OS/400-based software products that are most commonly installed. It is not a definitive list of all possible IBM software products for the iSeries or AS/400e. See 12.14, “Notes for Version 4 software tables” on page 450, for Version 4 software group information.
PAGE 457
Database products WDFM11 Skip ship2 V3R6 V4R3 Product identifier Stack feature2 Addn’l feature2 Software subscription8 - - V3R7 DataPropagator Relational Capture and Apply7 9 9 5769-DP1 #2565 DataPropagator Relational 5.
PAGE 458
Networking products WDFM11 Skip ship2 V4R3 Product identifier Stack feature2 Addn’l feature2 Software subscription8 9 5769-XZ1 #2566 - - 9 9 5798-TBW - - - 9 9 5648-C05 - - - Network Station Manager V2R1 (40-bit) 9 5648-C07 - - - Network Station Manager V2R1 (128-bit)†† 9 5648-C08 - - - V3R6 OS/2 Warp Server for OS/400 9 Wireless Connection for AS/400 9 9 Network Station Manager V1R3 V3R7 Network Station Manager for AS/400 (V3R7) 9 9 9 5648-B07 - - - Netwo
PAGE 459
Systems management products WDFM11 Skip ship2 V3R6 V4R3 Product identifier Stack feature2 Addn’l feature2 Software subscription8 V3R7 Netfinity AS/400 Manager for Windows 95 V3R76 9 9 5769-SVE #2538 - - ADSTAR Distributed Storage Manager6 9 9 5769-SV3 #2598 - - 9 - - #1442#1446 V4R3 Product identifier Stack feature2 Addn’l feature2 Software subscription8 Multiple Client Workstations Supported Multimedia products WDFM11 Skip ship2 V3R6 V3R7 9 9 9 5716-UB1 #2170 - -
PAGE 460
WDFM11 Office products Skip ship2 V3R6 V4R3 Product identifier Stack feature2 Addn’l feature2 Software subscription8 V3R7 Advanced Function Printing Utilities for OS/400 9 9 5769-AF1 #2541 - 9 Advanced DBCS Printer Support† 9 9 5769-AP1 #2510 - 9 #2607 - **** 9 IPDS Printer Support 7 Language Dictionaries for OS/400 9 Business Graphics Utility for OS/4006 Advanced Function Printing Fonts for OS/400 9 9 5716-DCT #2105 - - 9 9 5769-DS1 #2507 - 9 9 9 5769-FNT #2550
PAGE 461
12.13 OS/400 V4R2 software The following tables show the V4R2 OS/400-based software products that are most commonly installed. It is not a definitive list of all possible IBM software products for the iSeries or AS/400e. See 12.14, “Notes for Version 4 software tables” on page 450, for Version 4 software group information.
PAGE 462
WDFM11 Networking products Skip ship2 V3R6 V4R2 Product identifier Stack feature2 Addn’l feature2 Software subscription8 V3R7 Point-of-Sale Communication Utility for OS/400 9 9 5769-CF1 #2528 - Communications Utilities for OS/4006 9 9 5769-CM1 #2503 - 9 CallPath for OS/400 9 9 5716-CP3 #2131 - - Firewall for AS/400 9 9 5769-FW1 #2514 - 9 9 5769-MQ1 #2523 - 9 9 5769-MQ2 #2524 Internet Connection Secure Server†† 9 9 5769-NC1 #2506 - Internet Connection Secure
PAGE 463
Systems management products WDFM11 Skip ship2 V3R6 V4R2 Product identifier Stack feature2 Addn’l feature2 Software subscription8 V3R7 Backup Recovery and Media Services for AS/400 9 9 5769-BR1 #2521 - 9 Job Scheduler for OS/400 9 9 5769-JS1 #2594 - 9 9 9 5769-MG1 #2558 - 9 Performance Tools for OS/400 9 9 5769-PT1 #2525 - 9 Performance Tools Manager 9 9 - - #2610 9 Performance Tools Agent 9 9 - - #2611 9 OnDemand for AS/400 9 9 5769-RD1 #2593 - - Spoo
PAGE 464
WDFM11 Multimedia products Skip ship2 V4R2 Product identifier Stack feature2 Addn’l feature2 Software subscription8 V3R6 V3R7 9 9 9 9 5716-UB1 #2170 - - 9 9 9 9 - - #2223 - Client Access Ultimedia Tools for OS/400 9 9 9 9 5716-US1 #2172 - - Ultimedia Perfect Image/400 9 9 9 9 - - #2221 - Ultimedia Builder/400 9 9 9 9 - - #2222 - V4R2 Product identifier Stack feature2 Addn’l feature2 Software subscription8 Ultimedia Business Conferencing for OS/400 Pe
PAGE 465
WDFM11 Office products Skip ship2 V3R6 V4R2 Product identifier Stack feature2 Addn’l feature2 Software subscription8 V3R7 OS/4006 9 9 5769-DS1 #2507 - 9 Advanced Function Printing Fonts for OS/400 9 9 5769-FNT #2550 - 9 9 9 - - #2625 to #2639 9 9 9 5769-FN1 #2535 - 9 9 9 - - #2650 to #2654 9 OfficeVision for OS/4007 9 9 5769-WP1 #2504 - - ImagePlus VisualInfo for AS/400 9 9 9 5733-A18 - - - AFP PrintSuite for OS/4007 9 9 9 5798-AF3 - - 9 Office
PAGE 466
12.14 Notes for Version 4 software tables Note 1 V4 is supported on the following AS/400e RISC models only. See the overview table in the model chapters for the minimum OS/400 release to support each model. 򐂰 򐂰 򐂰 򐂰 򐂰 򐂰 򐂰 򐂰 򐂰 򐂰 9401-150 9402/4-4xx 9404/6-5xx 9402/4/6-600, 620, 640, 650, S20, S30, S40 9406-170 (V4R2) 9402/4/6-720, 730, 740 (V4R3) 9406-250 (V4R5) 9402/4/6-270 (V4R5) 9402/4/6-820, 830, 840 (V4R5) 9406-SB2/SB3 (V4R5) Version 4 does not support any AS/400 CISC models.
PAGE 467
Note 4 Alternate IPL Device Feature Codes: The following feature codes are hardware features. They are used to specify which storage device is to be used as an alternate IPL device.
PAGE 468
Note 8 A number in the Software Subscription column indicates that the product is on the Eligible Products List for Software Subscription. Clients must purchase Software Subscription when they move to Version 4 to upgrade to new versions or releases. Software Subscription is available at prepaid options of one or three years. The price of Software Subscription is the same regardless of what software has been licensed to a system. Most AS/400 stacked software is covered by Software Subscription.
PAGE 469
12.15 OS/400 software pricing groups OS/400 software is priced by software groups. This section shows the software group for each iSeries and AS/400e processor for Version 5 and Version 4. Use the Work with License Information (WRKLICINF) command to display the software group of the installed AS/400e or iSeries server. For information about software groups for earlier systems, refer to AS/400e RISC System Builder, REDP-0342. 12.15.
PAGE 470
Hardware models Processor feature Interactive feature or Server/Edition feature Version 5 group 820 #0150, #0151 - P20 #0152 - P30 #2395 #1521 P10 #1522, #1523, #1524 P20 #1522, #1523, #1524, #1525 P30 #2396 #2397 #2398 #1521 P30 P40 #2425 - P05 #2426, #2427 - P10 #2436 #2437 #2438 #1521 P10 #1522, #1523, #1524 P20 #1521 P20 #1522, #1523, #1524 P30 #1521 P20 #1522, #1523, #1524, #1526, #1527 P30 #1521 P30 #1522, #1523, #1524, #1525, #1526, #1527 P40 #2456 - P05
PAGE 471
Hardware models Processor feature Interactive feature or Server/Edition feature Version 5 group 840 #0158, #0159 - P40 #2352 #2353 #2354 #2416 #2417 #2418 #2419 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547, #1548 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546 P40 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546 P50 #1540 P40 #1541, #
PAGE 472
Hardware model Processor feature Interactive feature Version 4 group 270 #2248 #1517 P05 #2250 #1516, #1518 P10 #2252 #1516, #1519 P10 #2253 #1516, #1520 P20 #2422, #2423 - P05 #2424 - P10 #2431 #1518 P10 #2432 #1516, #1519 P10 #2434 #1516, #1520 P20 #2452, #2454 - P10 #2061 #1500 P10 #1501, #1502 P20 #1500 P10 #1501, #1502, #1503 P20 720 #2062 #2063 #2064 730 #2065 #2066 #2067 740 #1500 P20 #1502, #1503, #1504, #1505 P30 #1506 P20 #1507, #1508, #1509 P
PAGE 473
Hardware model Processor feature Interactive feature Version 4 group 840 #2416 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547 P50 #1540 P40 #1541, #1542, #1543, #1544, #1545, #1546, #1547 P50 #2417 #2418 #2419 #2420 SB2 #2315 - P30 SB3 #2316, #2318 - P40 12.
PAGE 474
V4R1 V4R2 V4R3 V4R4 V4R5 V5R1 V5R2 --- --- --- --- --- --- 5648-B45 --- --- --- --- 5733-B2B * 5733-CO2 5716-CP2* 5716-CP2* 5769-CP4 * 5648-C69 * N/A --- --- --- 5769-CE1 * N/A N/A --- --- --- 5769-CE2 * 5722-CE2 N/A --- --- --- 5769-CE3 * 5722-CE3 5722-CE3 5716-CF1* 5769-CF1 * 5769-CF1 * N/A N/A 5716-CM1* 5769-CM1 * 5769-CM1 * 5722-CM1 5722-CM1 --- 5769-CP4 * * N/A N/A N/A 5716-CR1* 5769-CR1 * 5769-CR1 * 5722-CR1 5722-CR1 5716-DB1
PAGE 475
V4R1 V4R2 V4R3 V4R4 V4R5 V5R1 V5R2 5716-PT1* 5769-PT1 * 5769-PT1 5769-PT1 5722-PT1 5722-PT1 --- --- --- 5733-PY1 5733-PY2 * 5733-PY3 5716-QU1 5716-QU1 5769-QU1 5769-QU1 5769-QU1 5722-QU1 5722-QU1 5716-RD1 5769-RD1 * 5769-RD1 5769-RD1 5722-RD1 5722-RD1 N/A N/A N/A N/A N/A N/A N/A 5716-SM1 5716-SM1 5769-SM1 5769-SM1 5769-SM1 5722-SM1 5722-SM1 5716-PM1 5716-PM1 --- 5769-PM1 * 5722-SS1 * 5769-SS1 5769-SS1 * * * 5722-SS1 5722-SS1 5716-ST1 5716-ST1
PAGE 476
460 iSeries and AS/400e System Builder
PAGE 477
13 Chapter 13. Cable part numbers for IBM iSeries and AS/400e systems This chapter has feature code descriptions for the HSL, power, and communication cables used with the IBM iSeries and AS/400e servers. © Copyright IBM Corp. 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007. All rights reserved.
PAGE 478
13.1 HSL cables Use the following table as a reference for the HSL cables supported on IBM iSeries or AS/400e systems. HSL cables #1460 #1460 - 3.0 m Copper HSL Cable The #1460 - 3.0 m HSL Cable is used to connect HSL ports in towers and system units. Supported on Models 270, 820, 830, 840 Minimum operating system level: OS/400 V4R5 The #1460 is a Customer Install Feature #1461 #1461 - 6.0 m Copper HSL Cable The #1461 - 6.0 m HSL Cable is used to connect HSL ports in towers and system units.
PAGE 479
#1475 #1475 - 10 m HSL to HSL-2 Cable The #1475 - 10 m HSL to HSL-2 Cable is used to connect HSL and HSL-2/RIO-G ports in towers and system units. Supported on Models 820, 830, 840 Minimum operating system level: i5/OS V5R3 The #1475 is a Customer Install Feature #1482 #1482 - 3.5 m HSL-2 Cable The #1482 - 3.5 m HSL-2 Cable is used to connect HSL-2/RIO-G ports in towers and system units.
PAGE 480
13.2 SPCN (power) cables Use the following table as a reference for the power cords supported on IBM iSeries or AS/400e systems. For more information use the following online resource: http://publib.boulder.ibm.com/infocenter/eserver/v1r2s/en_US/index.htm SPCN cables #6001 #6001 Power Control Cable - 2 m The #6001 is a 2 m SPCN Power Control Cable. The #6001 is a Customer Install Feature. #6006 #6006 Power Control Cable - 3M The #6006 is a 3 m SPCN Power Control Cable.
PAGE 481
13.3 Dual-line cords Use the following table as a reference for the dual-line cords that are supported on IBM iSeries or AS/400e systems. For more Information use the following online resource: http://publib.boulder.ibm.com/infocenter/eserver/v1r2s/en_US/index.htm Dual-line cords #5102 #5102 Dual Line Cords (820 CEC) The #5102 Dual Line Cords (820 CEC) provides dual-line cord capability for the Model 820 system unit.
PAGE 482
Dual-line cords #5115 #5115 Dual Line Cords - Tower The #5115 Dual Line Cords - Tower is a dual-line cord enabler for the #5094 PCI-X Expansion Tower. One 840W power supply is shipped. A second line cord must be ordered for each tower installing a #5115. Maximum: One #5115 per #5094 PCI-X Expansion Tower. Minimum operating system level: OS/400 V5R2 #5116 #5116 Dual Line Cords - #5294 The #5116 Dual Line Cords - #5294 provides dual-line cord capability for a single unit in a #5294 1.8 m I/O Tower.
PAGE 483
PCI/SPD miscellaneous server cables BBU Cable Diskette Cable Diskette/Twinaxial Cable Ethernet Cable Token Ring Cable 2.4 m (8 ft) 2.4 m (8 ft) 2.4 m (8 ft) 3.0 m (10 ft) 2.4 m (8 ft) 86G7712 46G3658 46G3585 86G7691 6339098 #5144 #9886 #9887 #9025 #9024 PCI Communication Cables for Models 150, 600, S10, 620, S20, 720, 250, 270, 820, 830, SB2, 840, and SB3 RS232 Cable RS232 Cable - Germany RS232 Cable - Japan V.24 Cable V.24 Cable V.24 Cable V.35 Cable V.36 Cable X.
PAGE 484
SPD Communication Cables for Models 600, 620, 640, 650, S10, S20, S30, S40 and SB1 RS232 Cable RS232 Cable - Germany RS232 Cable - Japan RS232 Cable RS232 Cable - Germany RS232 Cable - Japan V.24 Cable V.24 Cable - Germany V.24 Cable - Japan V.24 Cable V.24 Cable - Germany V.24 Cable - Japan V.24 Cable V.24 Cable - Germany V.24 Cable - Japan V.35 Cable V.35 Cable V.35 Cable V.36 Cable V.36 Cable V.36 Cable X.21 Cable X.
PAGE 485
14 Chapter 14. Summary of IBM AS/400 CISC models This chapter provides the capacity charts that indicate the minimum and maximum configurations of CISC models of the IBM AS/400. For detailed information about CISC features and models, see AS/400 CISC System Builder, REDP-0042. You can find a summary of RISC models in Chapter 15, “Summary of IBM AS/400e RISC models” on page 485, and more detail in AS/400e RISC System Builder, REDP-0342. Note: OS/400 V1R2 through V3R2 support CISC systems.
PAGE 486
14.1 AS/400 Model P02, P03, and 10S capacities The following sections provide the systems minimum and maximum capacity tables for 9401 Model P02, P03, and 10S. 14.1.1 Model P02 capacities Processor Feature Minimum Maximum Relative system performance (RAMP-C)2 2.5 2.5 Main storage (MB) 8 16 Disk storage (GB) 1.03 2.06 Twinaxial devices 1 7 Communication lines 1 1 Optional external tapes 1 1 14.1.
PAGE 487
14.2 AS/400 Model Y10, 236, and 436 capacities The following sections provide the minimum and maximum capacities for the 9402 Model Y10, 236 and 436 systems. 14.2.1 Model Y10 capacities Processor Feature 9402 Y10 Main storage (MB) 1-2 Disk storage (MB) 160-760 Diskette unit 1 Tape (¼-inch cartridge) 0-1 Communication lines 0-3 LAN adapters 0-1 Chapter 14.
PAGE 488
14.2.
PAGE 489
14.3 AS/400 Model C, D, E, and F capacities The following sections provide the minimum and maximum capacities for the 9402 Model C, D, E, and F systems. 14.3.
PAGE 490
14.3.
PAGE 491
14.4 AS/400 Model 200, 20S, 1xx, and 3xS capacities The following sections provides the minimum and maximum capacities for the 9402 Model 200 and 20S, and the 9402, 9404 and 9406 Model 1xx, 20S and 3xS systems. 14.4.1 Model 1xx, 20S, and 3xS capacities Processor Feature 9402 100 9404 135 9404 140 9402 20S 9406 30S 9406 30S #2010 #2411 #2412 Relative system performance (CPW)1 Client/server environment Interactive environment 17.1 5.5 32.3 9.6 65.6 11.6 17.1 5.5 32.3 9.6 68.5 11.
PAGE 492
14.4.2 Model 200 capacities Processor Feature 200 1 Relative system performance (CPW) Relative system performance (RAMP-C)2 Main storage (MB) #2030 #2031 #2032 7.3 2.5 8-24 11.6 4.0 8-56 16.8 6.
PAGE 493
14.5 AS/400 Model B, C, D, E, and F capacities The following section provide the minimum and maximum capacities for the 9404 Model B, C, D, E, and F systems. 14.5.
PAGE 494
14.5.
PAGE 495
14.6 AS/400 Model B, D, E, F, and 3xx capacities The following sections provide the minimum and maximum capacities for 9406 Model B, D, E, and F, and the 3xx systems. 14.6.
PAGE 496
14.6.
PAGE 497
14.6.
PAGE 498
14.6.
PAGE 499
14.6.
PAGE 500
14.7 Notes for all CISC system summary tables Note 1 Commercial Processing Workload (CPW) is used to measure the performance of all iSeries and AS/400e processors announced from September 1996 onward. The CPW value is measured on maximum configurations. The type and number of disk devices, the number of workstation controllers, the amount of memory, the system model, other factors, and the application running determine what performance is achievable.
PAGE 501
15 Chapter 15. Summary of IBM AS/400e RISC models This chapter provides the capacity charts that indicate the minimum and maximum configurations of RISC models of the IBM AS/400e. For detailed information about RISC features and models, see AS/400e RISC System Builder, REDP-0342. You can find a summary of CISC models in Chapter 14, “Summary of IBM AS/400 CISC models” on page 469, and more detail in AS/400 CISC System Builder, REDP-0042. Note: OS/400 V3R6 through V5R2 support RISC systems.
PAGE 502
Model and processor Announce/general availability Withdrawn from marketing 150 #0181, #0182, #0183, #0184 01 October 1996 12 December 1997 150 #0191, #0192, #0193, #0194 19 August 1997 31 August 1998 150 #0291, #0292, #0293, #0294 10 February 1998 31 December 1999 150 #0391, #0392, #0393, #0394 01 September 1998 31 December 1999 150 #0591, #0592, #0593, #0594 09 February 1999 31 October 2000 40S #2109 20 February 1996 31 August 1998 40S #2110 20 February 1996 31 March 1999 40S #2111,
PAGE 503
15.1 AS/400e Model S10, S20, S30, and S40 capacities The following sections provide the minimum and maximum capacities for the Model S10, S20, S30, and S40 system. 15.1.1 Model S10 capacities Processor Feature Model S10 #2118 #2119 45.4 16.2 1 64-384 73.1 24.
PAGE 504
15.1.2 Model S20 capacities Processor Feature Model S20 #2161 #2163 #2165 #2166 #2170 #2177 #2178 113.8 31.0 1 256-2048 210.0 35.8 1 256-204 8 464.3 49.7 2 256-409 6 759.0 56.9 4 256-4096 464.3 49.7 1 256-4096 759.0 110.7 4 256-4096 759.0 221.
PAGE 505
15.1.
PAGE 506
15.1.
PAGE 507
15.2 AS/400e Model 150 capacities The following tables provide the minimum and maximum capacities for the Model 9406 150 system. Package Twinaxial Entry #0181 Twinaxial Growth #0182 Server Entry #0183 Minimum software release Relative system performance (CPW-V3R7) Constrained1,2 Unconstrained1,2 Relative system performance (CPW-V4R1, V4R2/V4R3) Constrained1,2 Unconstrained1,2 V3R7 V3R7 V3R7 10.9/10.9 13.8/27.0 10.9/10.9 20.6/33.3 13.8/20.2 13.8/27.
PAGE 508
Package Minimum OS/400 release Relative system performance (CPW)1, 2 Constrained Unconstrained Main storage (MB) Disk storage (GB) Maximum feature card slots 14, 20 Communication lines 20 LAN IOAs #2790 PCI Integrated Netfinity Server LANs MFIOP LANs Workstation controllers Twinaxial ASCII LocalTalk Workstations Twinaxial ASCII LocalTalk ¼-inch cartridge tape (4.
PAGE 509
15.3 AS/400e Model 4HS, 4HE, 4HG, 4HL, 42E, 42G, and 42L packages and Model 4SS, 4SE, 4SG, 4TG, 4SL, 4TL, 40E, 41E, 40G, 41G, 40L, 41L, 400, and 40S capacities The following sections provide the minimum and maximum capacities for 9406 Model 4HS, 4HE, 4HG, 4HL, 42E, 42G, and 42L packages and the 9406 Model 4SS, 4SE, 4SG, 4TG, 4SL, 4TL, 40E, 41E, 40G, 41G, 40L, 41L, 400, and 40S systems. 15.3.
PAGE 510
15.3.3 Model 4SS, 4SE, 4SG, 4TG, 4SL, and 4TL capacities Package name Relative system performance (CPW-V3R6)1 Client/server environment Interactive environment Relative system performance (CPW-V3R7)1 Client/server environment Interactive environment Main storage (MB)22 Disk storage (GB)11 Standard tape cartridge Twinaxial devices LAN adapters18 Communication lines Software Charge Group Small Server 4SS Entry Server 4SE Growth Server 4SG Growth Server 4TG 24.5-52.9 8.4-18.3 24.5-52.9 8.4-18.3 24.
PAGE 511
15.3.
PAGE 512
15.3.
PAGE 513
15.4 AS/400e Model 50S, 53S, 500, 510, and 530 capacities The following sections provide the minimum and maximum capacities for 9406 Model 50S, 53S, 500, 510, and 530 systems. 15.4.
PAGE 514
15.4.
PAGE 515
15.5 AS/400e Model 600, 620, 640, and 650 capacities The following sections provide the minimum and maximum capacities for 9406 Model 600, 620, 640, and 650 systems. 15.5.
PAGE 516
15.5.2 Model 620 capacities Model 620 Processor Feature 1 Relative system performance (CPW) Number of n-way multiprocessors Main storage (MB) Numbers are for all processor features #2175 #2179 #2180 #2181 #2182 50.0 1 64-1856 16 85.6 1 256-2048 113.8 1 256-2048 210.0 1 256-2048 464.3 2 256-4096 SUE #9364 PCI (#9329) (#9330)12 SUE #9364 SPD (#9331)12 Base system #5065 Strg/PCI Expansion Tower Expansion tower System maximum Disk storage base (GB) 4.19 - - - 4.
PAGE 517
15.5.3 Model 640 and 650 capacities Model 640 Processor Feature Relative system performance (CPW) Number of n-way multiprocessors Main storage (MB) V4R2 V4R3 Disk storage base (GB) #2237 1 #2238 Model 650 #2239 #2240 #2243 2340.0 12 #2188 #2189 319.0 1 583.3 2 998.6 4 1794.0 8 512-12288 512-16384 512-12288 512-16384 512-12288 512-16384 1024-20480 1024-20480 1024-32758 1024-32758 1024-40960 1024-40960 3660.0 8 4.19 4.19 927.7 893.3 927.7 996.4 962.0 996.4 1340.0 1305.6 1340.0 1546.
PAGE 518
15.6 Notes for all RISC system summary tables Note 1 Commercial Processing Workload (CPW) is used to measure the performance of all iSeries and AS/400e processors announced from September 1996 onward. The CPW value is measured on maximum configurations. The type and number of disk devices, the number of workstation controllers, the amount of memory, the system model, other factors, and the application running determine what performance is achievable.
PAGE 519
Related publications We consider the publications that we list in this section particularly suitable for a more detailed discussion of the topics that we cover in this IBM Redpaper. IBM Redbooks For information about ordering the following publications, see “How to get IBM Redbooks” on page 505. Note that some of the documents that we reference here might be available in softcopy only.
PAGE 520
Other publications The following publications are also relevant as further information sources: 򐂰 AS/400 Physical Planning Reference, SA41-5109 򐂰 AS/400 RoadMap for Changing to PowerPC Technology, SA41-5150 򐂰 System Upgrade RoadMap (RISC to RISC), SA41-5155 򐂰 Software Installation, SC41-5120 򐂰 Backup and Recovery, SC41-5304 򐂰 iSeries Performance Capabilities Reference, SC41-0607 http://www-1.ibm.com/servers/eserver/iseries/perfmgmt/resource.htm http://publib.boulder.ibm.
PAGE 521
򐂰 Software Subscription for iSeries http://www-1.ibm.com/servers/eserver/iseries/sftsol/subscript.htm 򐂰 Software Inventory Assistant http://www-1.ibm.com/servers/eserver/iseries/sftsol/siu.htm 򐂰 Electronic Support Access http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm 򐂰 IBM eServer iSeries Support http://www.ibm.com/iseries400/support 򐂰 IBM eServer iSeries Resource Library http://www.ibm.com/eserver/iseries/library 򐂰 iSeries and AS/400 publications: “What’s new” by release http://publib.boulder.ibm.
PAGE 522
506 iSeries and AS/400e System Builder
PAGE 523
iSeries and AS/400e System Builder IBM eServer iSeries and AS/400e System Builder: IBM OS/400 Version 4 Release 3 - Version 5 Release 2 iSeries and AS/400e System Builder iSeries and AS/400e System Builder (1.0” spine) 0.875”<->1.
PAGE 524
iSeries and AS/400e System Builder iSeries and AS/400e System Builder
PAGE 525
PAGE 526
Back cover IBM eServer iSeries and AS/400e System Builder: ® Redpaper IBM OS/400 Version 4 Release 3 - Version 5 Release 2 The authoritative source for iSeries and AS/400e models Facts and rules for established AS/400e features Product numbers, prerequisites, storage, software at a glance This IBM eServer iSeries and AS/400e System Builder offers you a comprehensive guide to IBM iSeries and AS/400e hardware and associated IBM software.