- Hewlett-Packard SAN Switch Installation Guide

4/8 and 4/16 SAN S witch system Status LED patterns

The system status LED patterns are described in Table 10.

Table 10 System status LED patterns during normal operation

LED name

LED color Hardware status Recommended action

No light

Switch is off,

boot is not complete,

or boot failed

Verify that sw

itch is on and has

completed boo

ting.

Steady green Switch is operational. No action required.

Slow flashing

green (1

second on,

1 second off)

One or both of the following are

true:

Oneormoreenvironmental

ranges were exceeded.

Error log contains one or more

port diagnostic error messages.

Check environmental conditions,

error log, Por t Status LEDs, SFPs,

cables, and loopback plugs.

Correct error condition.

Clear error log.

Rerun diagnostics to verify fix .

System Status

LED

Amber

Switch is faulty or in itializing. Wait a few moments to verify that the

switch is not initializing.

SA N Switch installation guide