- Hewlett-Packard SAN Switch Installation Guide

NOTE:
The maximum number of ports per trunk for the 4/8 and 4/16 SAN Switches is four.
The FC ports are numbered from left to right in groups of four. This arrangement
indicates the groups of ports that c an be used in the same ISL trunking group. The
trunking groups a re the two or four sets of ports at the top or bottom of the group, as
shown in Figure 5 on page 27.
Optional SAN Switch features
SA N Switches suppor t the following optional software, activated with the purchase of
alicensekey:
NOTE:
All SAN Switch Power Pack models ship with these licensed options enabled.
• ISL Trunking
• Secure Fabric OS
• Fabric Watch
• Advanced Performance Monitoring
• Extended Fabrics
For detailed information on these features, see the Fabric OS administrator’s guide
for the firmware version you are running.
32 Overview