Datasheet

IBM Flex System EN4132 2-port 10Gb Ethernet Adapte

Supported I/O modules

The EN4132 2-port 10Gb Ethernet Adapter supports the I/O modules listed in the following table. One or

two compatible switches must be installed in the corresponding I/O bays in the chassis. Installing two

switches means that both ports of the adapter are enabled.

Table 3. I/O modules supported with the EN4132 2-port 10Gb Ethernet Adapter

Description Part number

Supports the

EN4132 adapter

IBM Flex System Fabric CN4093 10Gb Converged Scalable Switch 00D5823 No

IBM Flex System Fabric EN4093R 10Gb Scalable Switch 95Y3309 Yes

IBM Flex System Fabric EN4093 10Gb Scalable Switch 49Y4270 Yes

IBM Flex System EN4091 10Gb Ethernet Pass-thru 88Y6043 Yes

IBM Flex System EN2092 1Gb Ethernet Scalable Switch 49Y4294 No

The following table shows the connections between adapters installed in the compute nodes to the switch

bays in the chassis.

Table 4. Adapter to I/O bay correspondence

I/O adapter slot in the server Port on the adapter Corresponding I/O module bay in the chassis

Port 1 Module bay 1

Slot 1

Port 2 Module bay 2

Port 1 Module bay 3

Slot 2

Port 2 Module bay 4

The connections between the adapters installed in the compute nodes to the switch bays in the chassis

are shown in the following figure.