IBM Multi-Burner Plus User’s Guide
IBM Multi-Burner Plus User’s Guide
Note: Before using this information and the product it supports, be sure to read the information under Appendix D, “Service and Support,” Appendix E, “IBM Statement of Limited Warranty - Z125-4753-07 - 11/2002,” and Appendix F, “Notices.” First Edition (May 2004) © Copyright International Business Machines Corporation 2004. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents Safety: Read first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v General safety guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Service . . . . . . . . . . Power cords and power adapters . Extension cords and related devices Plugs and outlets . . . . . . Batteries . . . . . . . . . Heat and product ventilation . . CD and DVD drive safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix A. Product specifications . . . . . . . . . . . . . . . . . . . . . . . A-1 Appendix B. Problem solving . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Appendix C. Customizing the device driver configuration settings Enabling Enabling Enabling Enabling DMA for Windows Me . . . . . DMA for Windows 2000 Professional DMA for Windows XP . . . . . digital audio extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety: Read first Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Läs säkerhetsinformationen innan du installerar den här produkten.
General safety guidelines Always observe the following precautions to reduce the risk of injury and property damage. Service Do not attempt to service a product yourself unless instructed to do so by the IBM HelpCenter. Use only an IBM authorized service provider who is approved to repair your particular product. Note: Some parts can be upgraded or replaced by the customer. These parts are referred to as Customer Replaceable Units, or CRUs.
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement. Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter or to replace the outlet with one that enables this safety feature.
CD and DVD drive safety CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise physically damaged, it is possible for the disc to break apart or even shatter when the CD drive is in use.
x IBM Multi-Burner Plus User’s Guide
About this book ® This guide contains information on the IBM Multi-Burner Plus, and is available in the following languages: v Brazilian Portuguese v Czech v English v French v German v Italian v Japanese v Simplified Chinese v Slovak v Spanish v Traditional Chinese v Turkish The guide is divided into the following parts: Chapter 1, ″Introduction″ This chapter contains product and software descriptions and installation requirements for the IBM Multi-Burner Plus.
xii IBM Multi-Burner Plus User’s Guide
Chapter 1. Introduction This chapter contains product and software descriptions and installation requirements for the IBM Multi-Burner Plus. Product description This option package is intended for multimedia applications.
v UDF reader This software enables you to install software for reading DVD-RAM, DVD-RW, DVD+RW, and CD-RW media on other computers with DVD drives. v IBM Record Now This software enables you to copy CDs, create audio CDs, create MP3 CDs, and author data CDs. You can also use RecordNow to write data to DVD-RAM, DVD-RW, DVD-R, DVD+RW, and DVD+R discs for use in other computers or compatible consumer electronics products. You can also create bootable CDs and save CD images for later recording.
Drive controls and connectors The following diagrams show the location and functions of the drive controls and connectors. Front view of the drive M U LT I RECORDER 1 Disc drawer This drawer is where you load and unload a disc. 2 Busy indicator This light comes on when the drive reads from, writes to, or plays a disc. 3 Emergency eject hole This hole provides access to the eject mechanism to remove a disc from the drive. 4 Open/Close button This button opens and closes the disc drawer when you push it.
1-4 IBM Multi-Burner Plus User’s Guide
Chapter 2. Installation This chapter contains hardware and software installation instructions and operating information for the IBM Multi-Burner Plus. Installing the drive Complete the following steps to install the drive: Step 1. Opening the computer 1. Turn off the computer and all attached devices. 2. Unplug all power cords from the computer and all attached devices. 3. Remove the cover from the computer. Refer to your computer documentation for instructions on removing the computer cover. Step 2.
If you place the jumper in the cable-select position, the IDE cable automatically assigns the master and slave settings based on the position of the drive on the cable. You must use the cable-select setting for this cabling system whether the drive is the only device or the second device connected to the cable. The drive closest to the IDE controller is automatically the master drive. Any other devices on the IDE cable must also be set to cable-select. Step 4.
Step 6. Completing the hardware installation 1. Ensure that the drive is securely mounted and that the connectors are firmly attached. 2. Ensure that the cables do not interfere with the computer cover, and that they do not block the power-supply fan blades or airflow paths. 3. Reinstall the computer cover. 4. Reconnect all external devices. 5. Reconnect all power cords into the electrical outlets. Step 7.
v DVD-R: Write once media that has the best compatibility with set-top DVD players and computers. DVD-R media can be read in almost any type of DVD-ROM drive or DVD player. v DVD-RW: Write many times media that can be read in most set-top DVD players and almost all computers. Some older DVD players might not be able to read this media. v DVD+R: Write once media that has good compatibility with set-top DVD players and computers.
Returning the disc to the cartridge To return the disc to the cartridge, align the label side of the disc 1 with the DVD-RAM cartridge label side. Insert the disc and close the cartridge lid 2 . A clicking sound will occur when the lid closed. Precautions for handling Be careful when handling the removed disc. Debris, dust particles, fingerprints, smears, or scratches may impair recording and playback of the media. To clean dust or other debris, use a CD Cleaning Kit.
Media rating Write High-speed, 4x-10x, 4x-12x, 8-10x Yes Ultra-Speed, 16x-24x Yes, at 16x speed. Ultra-Speed+, 16x-32x Yes, at 16x speed Using the drive with CDs and DVDs Complete the following procedure to read a data disc: 1. Turn on the computer. 2. Press the Open/Close button on the front of the drive. 3. Insert a disc in the tray with the label facing up. 4. Close the tray by pressing the Open/Close button or by gently pushing in the loading tray.
Note: 8 cm and ″credit card CDs″ cannot be used in vertically mounted drives without a special adapter. Manually ejecting a disc If you press the Eject/Load button and the tray does not slide out, turn off the computer. Straighten a large paper clip to form a tool, as shown in the illustration. The straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into the manual-eject hole on the front of the drive (see “Drive controls and connectors” on page 1-3).
Note: You can change the DVD region code only five times. After you make five region code changes, the drive can play only MPEG-2 video titles that are associated with the fifth region code that you set. To change the region code, do the following: 1. Turn on your computer and start your operating system. 2. Click Start. 3. Select Programs. 4. Click Intervideo WinDVD. 5. Click Intervideo WinDVD. 6. Click the Properties icon to open the Properties window. 7. Click the General Properties tab. 8.
To start RecordNow in Windows Me or Windows 2000, select Start→Programs→IBM RecordNow. RecordNow projects Once RecordNow is started, you have the choice of selecting three tabs with different functions. v The Audio Project tab allows you to create Audio CDs, MP3 Jukebox disks, or listen to an audio CD or make a CD label. v The Data Project tab allows you to make a data disc, make an exact copy, erase a rewritable disc, or make a CD or DVD label.
Maintaining the drive This section includes information on taking care of your drive and the CDs and DVDs that you use with the drive. Handling and caring for a disc Digital discs are high-density media that must be handled with care and kept clean to ensure that they remain readable. The following precautions help to prolong the life of your discs. Attention: Wiping a disc using a circular motion can damage the disc and cause data loss. v Handle the disc by the edges or the center hole.
v v v v – Sudden shock or dropping – Placement on an inclined surface – Direct sunlight – Sudden temperature changes Do not insert foreign objects into the drive. Do not stack objects on the drive. Do not remove the drive cover or attempt to service the drive. Do not move the drive unit without removing any discs from the disc drawer and making sure that the drawer is closed. Keep the original packing materials.
2-12 IBM Multi-Burner Plus User’s Guide
Appendix A. Product specifications This appendix includes the following information: v Physical specifications v Power requirements v Environmental requirements v Read speeds v Write speeds Physical specifications The physical specifications1 of the drive are listed in the following table. Physical specification Height 42 mm (1.7 in.) Width 148 mm (5.8 in.) Length 190 mm (7.5 in.) Weight 920 g (2.0 lb.
DVD-RW (4.7 GB) 4.6 - 11.0 MB/s (8X CAV) DVD+RW (4.7 GB) 4.6 - 11.0 MB/s (8X CAV) DVD-RAM (Version 2.1, 4.7/9.4 GB, 3X media) 4.2 MB/s (3X ZCLV) DVD-RAM (Version 1.0, 2.6 GB media) 2.8 MB/s (2X ZCLV) CD-ROM 2.1 - 4.8 MB/s (32X CAV) CD-R 2.1 - 4.8 MB/s (32X CAV) CD-RW 1.5 - 3.6 MB/s (24X CAV) CD-DA (DAE) 1.5 - 3.6 MB/s (24X CAV) Write speeds Media Write speeds DVD-R (Version 2.0 for General, 650 nm, 8X media) 5.5 - 11.0 MB/s (8X ZCLV) DVD+R (8X media) 5.5 - 11.
Appendix B. Problem solving Computer problems can be caused by hardware, software, or human error. Using the information in this section, you might be able to solve problems yourself or gather helpful information to pass on to a service technician. You might also need to refer to your computer, operating system, or sound-adapter documentation. Review the following list for any problem descriptions that might fit your situation.
8. Select CD-ROM from the list that is displayed in the Device Manager window. Verify that a CD-ROM device is present in the list and that no conflicts exist. The device status indicates whether the device is working properly. 9. Click OK. 10. Close all windows and restart the computer. If the device icon is still not present, check cable connections and device-jumper settings, and resolve any conflicts that might exist.
15. Attempt to read the disc by typing dir C: (the Multi-Burner Plus is drive C because it is the only device that is connected to the IDE port.) – If the computer is able to read the disc, a conflict probably exists with one of the devices that are installed on your computer. You need to resolve this device driver conflict. Check the configuration jumper settings for the other devices or refer to our device documentation. – If you are unable to access the disc, you might have a hardware problem.
B-4 IBM Multi-Burner Plus User’s Guide
Appendix C. Customizing the device driver configuration settings Microsoft Windows Me and Windows 2000 Professional have two device-driver configuration parameters: Auto Insert Notify and DMA. The Auto Insert Notify parameter enables the computer to start playing or accessing the disc automatically after being inserted in the drive.
Enabling DMA for Windows XP To change the DMA parameter setting from the Windows XP desktop, do the following: 1. Click Start. 2. Click Control Panel. 3. Click Switch to classic view. 4. Double-click System. 5. Click the Hardware tab. 6. Click the Device Manager button. 7. Click the IDE ATA/ATAPI controller to expand the tree. 8. Double-click on the controller where your Multi-Burner Plus is located (Primary IDE or Secondary IDE). 9. Click the Advanced Settings tab. 10.
2. Select Device Manager from the Hardware tab. In Windows Me, the Hardware tab shows the Device Manager directly without clicking the button, as shown in the figure below. 3. In the Device Manager tab, open the ’+’ for DVD/CD-ROM drives, right click on your drive, and select Properties. Appendix C.
4. Select the Properties tab and check the Enable Digital Audio checkbox, as shown in the figure below. To 1. 2. 3. enable Digital Audio Playback in Windows Media Player, perform the following procedure: Open Windows Media Player. Select Tools→Options... from the Media Player menu. Select the CD Audio tab and check the Digital Playback box, as shown in the figure below.
Appendix D. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of the product. Refer to your IBM Statement of Limited Warranty for a full explanation of IBM warranty terms. Online technical support Online technical support is available during the life of your product through the Personal Computing Support Web site at www.ibm.com/pc/support.
Country or Region Telephone Number Country or Region Telephone Number Bolivia 0800-0189 Norway 66 81 11 00 Brazil 55-11-3889-8986 Peru 0-800-50-866 Canada 1-800-565-3344 Philippines 632-995-2225 Toronto 416-383-3344 Chile 800-224-488 Portugal 21-791 51 47 China (PRC) 800-810-1818 Russia 095-940-2000 China (Hong Kong S.A.R.
Appendix E. IBM Statement of Limited Warranty Z125-4753-07 - 11/2002 Part 1 - General Terms This Statement of Limited Warranty includes Part 1 - General Terms, Part 2 - Country-unique Terms, and Part 3 Warranty Information. The terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale.
Any technical or other support provided for a Machine under warranty, such as assistance via telephone with ″how-to″ questions and those regarding Machine set-up and installation, is provided WITHOUT WARRANTIES OF ANY KIND. How to Obtain Warranty Service If the Machine does not function as warranted during the warranty period, contact IBM or your reseller to obtain warranty service.
b. backup or secure all programs, data, and funds contained in the Machine; c. IBM or your reseller with sufficient, free, and safe access to your facilities to permit IBM to fulfill its obligations; and d. inform IBM or your reseller of changes in the Machine’s location. 4.
Jurisdiction All of our rights, duties, and obligations are subject to the courts of the country in which you acquired the Machine. Part 2 - Country-unique Terms AMERICAS ARGENTINA Governing Law: The following is added after the first sentence: Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Ordinary Commercial Court of the city of Buenos Aires.
What this Warranty Covers: The following paragraph is added to this Section: The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation.
2. as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to, or in any way related to the subject of this Statement of Limited Warranty, , the charge paid by you for the individual Machine that is the subject of the claim. For purposes of this item, the term ″Machine″ includes Machine Code and Licensed Internal Code (″LIC″).
Limitation of Liability: Item 3 in the fifth paragraph is replaced by the following: SPECIAL (INCLUDING NOMINAL AND EXEMPLARY DAMAGES), MORAL, INCIDENTAL, OR INDIRECT DAMAGES FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES; OR Arbitration: The following is added under this heading Disputes arising out of or in connection with this Statement of Limited Warranty shall be finally settled by arbitration which shall be held in Metro Manila, Philippines in accordance with the laws of the Philippines then in effect.
Add the following paragraph in Western Europe (Austria, Belgium, Cyprus, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Monaco, Netherlands, Norway, Portugal, Spain, San Marino, Sweden, Switzerland, United Kingdom, Vatican State): The warranty for Machines acquired in Western Europe shall be valid and applicable in all Western Europe countries provided the Machines have been announced and made available in such countries.
In Albania, Armenia, Azerbaijan, Belarus, Bosnia-Herzegovina, Bulgaria, Croatia, Georgia, Hungary, Kazakhstan, Kyrgyzstan, FYR Macedonia, Moldova, Poland, Romania, Russia, Slovakia, Slovenia, Tajikistan, Turkmenistan, Ukraine, Uzbekistan, and FR Yugoslavia all disputes arising out of this Statement of Limited Warranty or related to its violation, termination or nullity will be finally settled under the Rules of Arbitration and Conciliation of the International Arbitral Center of the Federal Economic Chamber
The above limitation shall not apply to damages for bodily injuries (including death) and damages to real property and tangible personal property for which IBM is legally liable. 2.
The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty. The following sentence is added to the end of item 2: IBM’s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence.
Limitation of Liability: The following is added at the end of this section: The limitation and exclusion specified herein shall not apply to liability for a breach of contract damaging life, physical well-being, or health that has been caused intentionally, by gross negligence, or by a criminal act. The parties accept the limitations of liability as valid provisions and state that the Section 314.
IBM’s entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM.
A warranty period of 1 year on parts and 1 year on labor means that IBM provides warranty service without charge for parts and labor during the 1 year warranty period. Types of Warranty Service If required, IBM provides repair or exchange service depending on the type of warranty service specified for your Machine in the above table and as described below. Warranty service may be provided by your reseller if approved by IBM to perform warranty service.
Phone numbers are subject to change without notice. For the latest phone number list, go to www.ibm.com/pc/support and click Support Phone List.
E-16 IBM Multi-Burner Plus User’s Guide
Appendix F. Notices IBM may not offer the products, services, or features discussed in this document in all countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used.
Electronic emissions notices IBM Multi-Burner Plus Federal Communications Commission (FCC) statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Dieses Gerät ist berechtigt in Übereinstimmungmit dem Deutschen EMVG das EG-Konformitätszeichen CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraph 5 des EMVG ist die: IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart. Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2: Das Gerät erfüllt die Schutzanforderungen nach EN 55024:1998 und EN 55022:1998 Klasse B.
Este producto ha sido probado y satisface los límites para Equipos Informáticos Clase B de conformidad con el Estándar Europeo EN 55022. Los límites para los equipos de Clase B se han establecido para entornos residenciales típicos a fin de proporcionar una protección razonable contra las interferencias con dispositivos de comunicación licenciados.
Part Number: 73P3309 Printed in USA (1P) P/N: 73P3309
