Datasheet

IBM System x3630 M3 10
The following table lists memory options available for the x3630 M3 server.
Table 5. Memory options
Part
number
Description Maximum
quantity
supported
Standard
models
where
used
49Y1432 1 GB (1x 1 GB, 1Rx8, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) -
49Y1434 2 GB (1x 2 GB, 1Rx4, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) -
49Y1405 2 GB (1x 2 GB, 1Rx8, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) -
49Y1435 4 GB (1x 4 GB, 2Rx4, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) 22Y, 32Y,
42Y, 52Y,
62Y, 72Y
49Y1406 4 GB (1x 4 GB, 1Rx4, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) A2x, B2x,
C2x, D2x,
F2x, 64x,
G2x
49Y1407 4 GB (1x 4 GB, 2Rx8, 1.35 V) PC3L-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) -
49Y1397 8 GB (1x 8 GB, 2Rx4, 1.35 V) PC3L-10600 CL9 ECC 1333 MHz LP RDIMM 12 (6 per CPU) C4x
49Y1436 8 GB (1x 8 GB, 2Rx4, 1.5 V) PC3-10600 CL9 ECC DDR3 1333 MHz LP RDIMM 12 (6 per CPU) -
49Y1400 16 GB (1x 16 GB, 4Rx4, 1.35 V) PC3L-8500 CL7 ECC DDR3 1066 MHz LP RDIMM 12 (6 per CPU) -
Internal disk storage options
The IBM System x3630 M3 models come standard with one of the following internal disk storage
configurations:
12x 3.5-inch hot-swap SAS/SATA hard drive bays at the front of the server

24x 2.5-inch hot-swap SAS/SATA hard drive bays at the front of the server

In addition, the server supports hot-swap drives at the rear of the server (Figure 3):
For models with 3.5-inch drives at the front, two extra 3.5-inch hot-swap hard drive bays

For models with 2.5-inch drives at the front, four extra 2.5-inch hot-swap hard drive bays
