PC Server User's Handbook

Installing Internal Drives

6. Orient the drive .3/ so that the power and signal .4/ connectors

are near the top surface of the drive; then, place the drive on the

static-protective surface again.

7. Place the carrier .2/ on top of the drive.

8. Attach the carrier using four screws .1/ of appropriate size and

length. The carrier includes EMI/ESD grounding clips .5/ that

make contact with the drive through two of the screws.

Note: The screws are included in the drive accessory kit that

came with your server.

176 PC Server 704 User's Handbook