English - 1 Français Español Italiano Portuguese Your New Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connecting Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Kerr15_main_1.fm Page 2 Wednesday, September 5, 2001 6:16 PM Your New Monitor Connecting Your Monitor 3 2 1 2 the power cord for your computer into a nearby outlet. Turn off your computer and unplug the power cord. Signal cable Connect the end of the signal cable to your computer’s video port (Video board, video card, or graphics card). 3 Power port Connect the power cord for your monitor to the power port on the back of the monitor.
Your New Monitor + Adjustment buttons Allow you to move around the on-screen display (OSD) menu and to make adjustments. OSD/Select Activates the On-Screen-Display / selects control icons / locks the OSD to prevent changes. EXIT Closes an active menu window and takes you to the previous level. If you are in the main level of the menu, pushing this button will turn off the menu. Important: Holding in this button for longer than 5 seconds erases all data in the User Settings memory.
Kerr15_main_1.fm Page 4 Wednesday, September 5, 2001 6:16 PM Your New Monitor Direct Button Access Brightness and contrast can be adjusted as follows, without the need to display the OSD: Select the function and use the “ - “ and “ + “ buttons to adjust. If adjustment is not made within 15 seconds, the current settings will be saved and the control screen will disappear automatically.
Kerr15_pg4.fm Page 4 Thursday, October 11, 2001 1:14 AM Operation On Screen Display(OSD) Your monitor has an OSD, accessed by the buttons on the front of your monitor, that allows you to adjust characteristics of the screen image. Display changes are indicated by on-screen adjustment icons. Some functions have sub-menus. 1 2 3 Push the menu button to display the main menu. Function icons are arranged across the top of the OSD. Push the - or + button to move through the icons.
Operation Monitor Function Control Contrast Contrast of screen image. -– Decreases contrast + Increases contrast Brightness : Access Function Contrast Français Brightness Background brightness of screen. -– Decreases brightness + Increases brightness : Access Function Horizontal Position Horizontal screen position. -– Moves screen left + Moves screen right : Access Function Vertical Position Vertical screen position.
E54-4p.fm Page 6 Friday, January 5, 2001 11:02 AM Operation Icon Monitor Function Control Pincushion Straightens screen vertical edges. -– Curves image inward + Curves image outward Pincushion : Access Function Geometry Trapezoid Width of top and bottom of screen. -– Widens bottom of screen + Widens top of screen 1.
E54-4p.fm Page 7 Friday, January 5, 2001 11:02 AM Monitor Function Control Language Language -– and + scroll through on-screen language options. (English/ Deutsch/ Francais/ Italiano Brazilian Português/ Español) 1 2 3 4 Video Input Level Selects the video signal level -– Select 0.7 V + Select 1.0 V : Access Function H-MoirŽ 2. + - : Select Function Español : Exit Menu : Previous Menu Portuguese Color Temperature -– 9300k more blue + 6500k more red Advanced 1.
E54-4p.fm Page 8 Friday, January 5, 2001 11:02 AM Operation Icon Monitor Function Control Zoom -– Reduces view of display area + Enlarges view of display area Zoom : Access Function Degauss Removes color distortion caused by magnetic fields. Do not use more than once in 30 minutes. Recall Returns monitor to original settings. -– No + Yes Display Timing Monitor display settings.
Troubleshooting Before calling for service, check the information in this section to see if you can solve the problem yourself. English E54-4p.fm Page 9 Friday, January 5, 2001 12:58 PM “No Connection, Check Signal Cable” appears n Check the signal cable connection between the computer and the monitor. Français There is no screen image n Check to see that both the monitor and the computer are plugged in and turned on.
E54-4p.fm Page 10 Friday, January 5, 2001 11:02 AM Help & Service Machine Name - E54 Color Monitor (M/T 6331) Warranty Period - Three (3) Years See the IBM Statement of Limited Warranty included in this publication for IBM's warranty terms and conditions. The IBM Machine Warranty worldwide Web site at http://www-1.ibm.
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
E54-4p.fm Page 12 Tuesday, January 16, 2001 2:22 PM Specifications Specifications Model: IBM E54 Picture Tube • 15” (38 cm) Full square type (35 cm Viewable) • 90° Deflection • Dot pitch: 0.28 mm • Aluminized tri-color phosphor dot trio with black matrix. • Anti-doming invar shadow mask. Synchronization • Horizontal: • Vertical: Display Color • Unlimited Maximum Resolution • 1280 Dots • 1024 Lines Active Display • Horizontal: • Vertical: 10.5 ± 0.16 inch (267.0 ± 4 mm) 7.9 ± 0.16 inch (200.
Power Cords For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To avoid electrical shock, always use the power cord and plug with a properly grounded power outlet. IBM power cords used in the United States and Canada are listed by the Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA).
Italy, Chile 2 (IRSM 2073) 36L8879 Argentina, Uruguay, Paraguay 62 (GB 2099.1) 02K0545 China 32 (SI 32) 14F0086 Israel 22 (SABS 164) 14F0014 South Africa, India, Sri Lanka, Pakistan, Uganda, Lesotho, Nambia, Swaziland 24 (1011-S24507) 14F0050 Switzerland, Lichtenstein Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003.
Kerr54_svcinfo.fm Page 1 Wednesday, September 5, 2001 6:17 PM Service Information The following parts are for use by IBM service, or IBM authorized dealers, to support the customer warranty. Parts are for service use only.
IBM Monitor Safety and Warranty Information OPTIONS by IBM
First Edition (July 2001) © Copyright International Business Machines Corporation 2001. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Safety Information: Read first
DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached. • Do not connect or disconnect this product during an electrical storm. • The power cord plug must be connected to a properly wired and grounded power outlet. • Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets. • To isolate the monitor from the electrical supply, you must remove the plug from the power outlet.
PELIGRO Para evitar riesgos de descargas eléctricas: • No retire bajo ningún concepto las cubiertas. • No maneje el monitor sin antes acoplar el soporte. • No conecte ni desconecte el equipo de una toma de alimentación durante una tormenta eléctrica. • El cable de alimentación debe estar conectado a un enchufe debidamente cableado y con toma de tierra.
FARE Slik unngår du fare for elektrisk støt: • Ikke ta av dekslene. • Ikke bruk produktet dersom sokkelen ikke er montert. • Ikke koble produktet til eller fra under tordenvær. • Pluggen på strømledningen må kobles til korrekt montert og jordet strømuttak. • Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt montert og jordet strømuttak. • For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket. Strømuttaket bør være lett tilgjengelig.
TEHLIKE Elektrik çarpmasý tehlikesinden kaçýnmak için: • • • • • • Kapaklarý çýkarmayýnýz. Bu cihazý kaidesine takýlý durumda deðilken çalýþtýrmayýnýz. Bu cihazý elektriksel fýrtýna sýrasýnda prize takmayýnýz veya prizden çýkarmayýnýz. Elektrik kablosunun fiþi, elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ bir prize takýlmalýdýr. Bu cihazýn baðlanacaðý diðer tüm cihazlar da elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ prize takýlmýþ olmalýdýr.
¤°«± º¥¬®¹§º¤ º°«± ²¥°®¬ ©£« «¥¨ ´ ²£«¦ ©£ • ¦ «£« ²£¡ ²¡¦ ¦ ° ´ ¦£¬®¦ ©£ • §£±² ´®« ´¬ ¦¨³¡ ´³²¦ ° ´ ±´ª¦ ²¡¦ ©£ • ±² £°¨ £ª±´ £¦¨³¡ ¬±³¦ ¡¥ ¦¥ ´ ²¡¦ ³£ • ²°¨¦ ²¡¨³ ²£³¥¨ • ¬±³³ ¦ ³£ £¦¨³¡ ¬±³¨ ¬±´ ´ ±´ª¦ ³£ ¡¥ ²±¨¨ ° ´ ¦ £¥ • ±² £°¨ £ª±´ £¦¨³¡ ¬±³¦ ²¡¨ ££ ´¦± ³£ª ££ £¦¨³¡ ¥®¥·®® ¢¶¤ º¸¡²¤ ²£¬¦ ¯¦¨¨ ± ¦¬ ¦¬ ° ¦±³¨ § ´²£ ¦®¢¦ ³£ ©¥¦ ¥ £ª¬° ° • §£³ª £ª³
Warranty Information This contains the warranty period, warranty service information, and the IBM Statement of Limited Warranty. Warranty period Machine - IBM Color Monitors (E Series, G Series, P Series, and T Series models) Warranty period* - Three (3) years * Contact your place of purchase for warranty service information. Some IBM Machines are eligible for on-site warranty service depending on the country where service is performed.
• • • Exact wording of the error message (if any) Description of the problem Hardware and software configuration information for your system If possible, be at your computer. Your technical support representative might want to walk you through the problem during the call. For the support telephone number and support hours by country, refer to the following table. If the number for your country or region is not listed, contact your IBM reseller or IBM marketing representative.
Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse, accident, modification, unsuitable physical or operating environment, improper maintenance by you, or failure caused by a product for which IBM is not responsible. The warranty is voided by removal or alteration of Machine or parts identification labels.
You also agree to 1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange; 2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own; and 3.
Part 2 - Country-unique Terms AMERICAS BRAZIL Governing Law: The following is added after the first sentence: Any litigation arising from this Agreement will be settled exclusively by the court of Rio de Janeiro. NORTH AMERICA Warranty Service: The following is added to this Section: To obtain warranty service from IBM in Canada or the United States, call 1-800-IBM-SERV (426-7378).
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first sentence: laws of the State of New York. The following is added to this Section: Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration which shall be held in Singapore in accordance with the rules of the International Chamber of Commerce (ICC).
The IBM Warranty for Machines: The following paragraph is added to this Section: The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited. The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides, if you require the goods for the purposes of a business as defined in that Act.
country. Warranty service in Africa is available within 50 kilometers of an IBM authorized service provider. You are responsible for transportation costs for Machines located outside 50 kilometers of an IBM authorized service provider.
The following sentence is added to the end of item 2: IBM’s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence. EGYPT Limitation of Liability: The following replaces item 2 in this Section: as to any other actual direct damages, IBM's liability will be limited to the total amount you paid for the Machine that is the subject of the claim. For purposes of this item, the term "Machine" includes Machine Code and Licensed Internal Code.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND Limitation of Liability: The following is added to this Section: IBM's entire liability to you for actual damages arising in all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM.
Part Number: 22P4803 Printed in the USA 22P4803 0422P4803
