Datasheet

Chelsio 10GbE Adapters for IBM System Cluster 1350 and IBM iDataPlex 7
Supported servers
The Chelsio single-port and dual-port adapters are supported in the IBM servers that are listed in Table 3.
Table 3. Supported servers in the 1350 program
Part
number
Chelsio S310E Single-port 10GbE PCIe x8 Adapter 59Y1952 Y Y Y Y N N N N
Chelsio S310E Single-port 10GbE PCIe x8 Adapter (SFP+
connector)
46M1809 Y Y Y Y N N N N
Chelsio S310E Single-port 10GbE PCIe x8 Adapter (CX4
connector)
46M1813 Y Y Y Y N N N N
Chelsio S320E Dual-port 10GbE PCIe x8 Adapter 59Y1956 Y Y Y Y N N N N
Chelsio 10GbE Expansion Card (CFFh) for IBM BladeCenter 46M1817 N N N N Y Y Y Y
Supported operating systems
The Chelsio adapters support the following operating systems (including support for both TOE and NIC
mode, unless otherwise stated):
FreeBSD

Kernel.org Linux-2.6.9, 2.6.12, and 2.6.20

Red Hat Enterprise Linux 3 base kernel (NIC only, no TOE support).

Red Hat Enterprise Linux 4 U3, U4, U5, U6, U7, and U8

Red Hat Enterprise Linux 5 base, U1, U2, U3, and U4

Solaris and Open Solaris

SUSE Linux Enterprise Server 9 SP3 (NIC only, no TOE support)

SUSE Linux Enterprise Server 10 base, SP1, SP2 and SP3

SUSE Linux Enterprise Server 11 base

Microsoft Windows Server 2003 SP2 (x64)

Microsoft Windows Server 2008 R2 (x64)

VMware ESX/ESXi 3.5

VMware ESX/ESXi 4.0

See Chelsio driver README file for the latest information about the specific versions and service packs
that are supported, available from:
http://www.chelsio.com/support