Datasheet

Chapter 13. Maintenance and Troubleshooting 545
Draft Document for Review January 29, 2013 12:52 pm 8068ch13-Maintenance and Troubleshooting.fm
Figure 13-14 Step 2 of 5 - Run upgrade test utility
7. Click Next to check for any dependent volumes and to proceed with the upgrade.
8. Click the Download link to download the latest upgrade package from the web server. If
your web browser is behind a firewall or does not have Internet access, download the
package manually to your laptop.
9. Click Next to upload the upgrade package to the system and next click Browse to select a
file, as shown in Figure 13-15.
Figure 13-15 Step 4 of 5 - Upload the package to the system
10.I Click Next to continue the upgrade. Select Automatic upgrade and click OK, as shown in
Figure 13-16 on page 546.
Note: The test may take several minutes to complete. If the upgrade test utility used
didn’t match with the upgrade version you want to upgrade to, you will receive a
message similar to the following message
This version of svcupgradetest cannot test the currently running version of cluster code.
This cluster has software version 6.4.1.3 installed. Please check the support website to
see if a newer version of this tool is available.
It’s highly recommended to run upgrade test utility before you perform the upgrade
software task. Obtain the appropriate version of the upgrade test utility and try it again
before continuing the software upgrade.
Note: you can download the IIBM Flex System V7000 software upgrade package, or
you can browse and upload the software upgrade package from the location where you
saved it. Automatic upgrade process provides a unified mechanism to upgrade the
entire system in a coordinated process with no user intervention.