Datasheet

8068ch12-Host Config.fm Draft Document for Review January 29, 2013 12:52 pm
478 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
3. The output provides information about the connected volumes. In our example, there is
one disk connected, Disk 14 for the Windows host, and four paths to the disk are available
(State = Open). Open the Windows Disk Management window (Figure 12-5) by clicking
Start  Run, type diskmgmt.msc, and click OK or simply open it from Server Manager.
Figure 12-5 Windows Disk Management
4. Right-click the disk in the left pane and select Online (Figure 12-6).
Figure 12-6 Place a disk online
5. Right-click the disk again, click Initialize Disk (Figure 12-7), and click OK.
Figure 12-7 Initialize Disk menu
Windows device discovery: Usually, Windows discovers new devices, such as disks,
by itself. If you have completed all the steps and do not see any disks, click Actions 
Rescan Disk in Disk Management to discover the new volumes.