Datasheet

Chapter 12. Host Configuration 477
Draft Document for Review January 29, 2013 12:52 pm 8068ch12-Host Config.fm
Navigate to the Mapped Volumes tab (Figure 12-4).
Figure 12-4 Mapped Volumes to a host
The host details show you which volumes are currently mapped to the host, and you also
see the volume UID and the SCSI ID. In our example, one volume with SCSI ID 0 is
mapped to the host.
2. Log on to your Microsoft host and click Start  All Programs  Subsystem Device
Driver DSM  Subsystem Device Driver DSM. A command-line interface opens. Enter
datapath query device and press Enter to see if there are IBM Flex System V7000
Storage Node disks connected to this host (Example 12-1).
Example 12-1 datapath query device
C:\Program Files\IBM\SDDDSM>datapath query device
Total Devices : 1
DEV#: 0 DEVICE NAME: Disk2 Part0 TYPE: 2145 POLICY: OPTIMIZED
SERIAL: 60050760008C0006F800000000000028
============================================================================
Path# Adapter/Hard Disk State Mode Select Errors
0 Scsi Port1 Bus0/Disk2 Part0 OPEN NORMAL 0 0
1 Scsi Port1 Bus0/Disk2 Part0 OPEN NORMAL 16 0
2 Scsi Port2 Bus0/Disk2 Part0 OPEN NORMAL 0 0
3 Scsi Port2 Bus0/Disk2 Part0 OPEN NORMAL 16 0
C:\Program Files\IBM\SDDDSM>