Datasheet

8068ch11-SAN Config.fm Draft Document for Review January 29, 2013 12:52 pm
452 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Figure 11-13 Active 10Gb Ethernet on Canister 1
Figure 11-14 shows the active Ethernet port for Canister 2 of the IBM Flex System V7000
Storage Node. By comparing the canister PWWNs with Example 11-5 on page 451 you can
see that Canister 1 uses port INTA3 and Canister 2 uses INTA4.
Figure 11-14 Active 10Gb Ethernet on Canister 2
Create FCoE Zoning
By creating a zone which will include PWWNs of the host - Compute Node 11 and the storage
controller - IBM Flex System V7000 Storage Node the two end points will be able to connect
and storage can be accessed by the O/S platform residing on Compute Node 11. The
following zoning steps include: