Datasheet

Chapter 6. Basic Volume and Host Configuration 257
Draft Document for Review January 29, 2013 12:52 pm 8068ch06-Volumes.fm
Figure 6-23 The Hosts menu - create new host
2. Click Fibre Channel Host - the Wizard automatically moves to the next screen.
Figure 6-24 shows that the first choice we have to make is whether we are creating a Fibre
Channel attached host or an iSCSI host.
Figure 6-24 New Host creation - select iSCSI or FC host
3. Give the host a name after your choice of the host type.
4. Select the World Wide Names (WWNs) that represent the Host Bus Adaptor (HBA) ports
in your server. If these do not appear on the list click Rescan. If they still not appear check
your SAN-switch Zoning.
Figure 6-25 on page 258 shows that we are selecting the two WWNs that represent the
two HBAs in our server.