Datasheet

8068ch04-Initial Config.fm Draft Document for Review January 29, 2013 12:52 pm
156 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Figure 4-3 IBM Flex System Manager - Hardware Map
3. From the Chassis Manager page in the management software web interface, click the
chassis name that contains your applicable storage node as shown in Figure 4-4 on
page 157 (A) and continue to Step 4 on page 157. If the chassis is not displayed, add the
chassis by performing the following steps:
–Select General Actions  Add or Remove a chassis, as shown in Figure 4-4 on
page 157 (B).
– Select the chassis you want to manage
– Click Manage. The Management Domain page displays.
– Click Manage.
– Enter the user ID and password for the CMM of the chassis that you want to manage.
– Wait while the status is processed. After the status is processed, the status changes to
Success, and the message changes to Managed.
– Click Done.