Datasheet

Chapter 12. Host Configuration 495
Draft Document for Review January 29, 2013 12:52 pm 8068ch12-Host Config.fm
Figure 12-32 FCoE drivers are installed
5. On the Windows 2008 R2 server install appropriate multipathing software. Multipathing
software for FCoE is the same as for Fibre Channel (FC) attached hosts and is called
Subsystem Device Driver Device Specific Module (SDDDSM). SDDDSM software can be
downloaded from:
https://www.ibm.com/storage/support
6. On the Windows 2008 R2 server you may optionally install the Emulex OneCommand
Manager which provides detailed information about the configured FCoE ports and their
status. Emulex OneCommand Manager can be downloaded from:
http://www.emulex.com/downloads/ibm/lightpulse-fc-hba-drivers.html
Figure 12-33 on page 496 shows an example of how Emulex OneCommand Manager
display the FCoE ports and the volumes it sees when IBM Flex System V7000 Storage
Node volumes are mapped to the Windows 2008 R2 server.