Datasheet

Chapter 12. Host Configuration 489
Draft Document for Review January 29, 2013 12:52 pm 8068ch12-Host Config.fm
Verifying Microsoft iSCSI SW initiator setup
From the Windows server iSCSI Initiator Applet menu Figure 12-23 shows the IBM Flex
System V7000 Storage Node canister IQNs defined.
Figure 12-23 Canister IQN define in iSCSI initiator
From this window click on the ‘Properties’ box with the mouse for node1 highlighted as shown
in Figure 12-23. Figure 12-24 will show both canister IP addresses for node1 from the ‘Portal
Groups’ tab.
Figure 12-24 Portal Groups tab shows both IP addresses of canister
The ‘Discovery’ tab in the ‘Properties’ as shown in Figure 12-25 on page 490 shows all the
portal target IP addresses of the iSCSI configuration.