Datasheet

Chapter 12. Host Configuration 487
Draft Document for Review January 29, 2013 12:52 pm 8068ch12-Host Config.fm
8. Select the Enable Multipath check box and click OK. The second port now appears as
Connected (Figure 12-20).
Figure 12-20 Second target port connected
Repeat this step for each IBM Flex System V7000 Storage Node port you want to use for
iSCSI traffic. It is possible to have up to four port paths to the system.
9. Open the Windows Disk Management window (Figure 12-21 on page 488) by clicking
Start  Run, typing diskmgmt.msc or simply open it from the Server Manager - click OK.