Datasheet

8068ch03-Sys Manage.fm Draft Document for Review January 29, 2013 12:52 pm
120 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Horizontal menu
The horizontal menu is divided in 5 pull down menus, which we will cover in this section.
Home menu is divided in to 3 groups:
򐂰 Dashboard takes you back to the main page.
򐂰 Getting started gives you shortcuts to initial setup off the FSM and quick start guides in
Info Center.
򐂰 Summary pages gives you shortcuts to Storage control, Network control and service &
support pages in IBM Flex System Manager.
Figure 3-51 shows the Home menu.
Figure 3-51 IBM FSM Explorer - Home menu
Systems menu is divided in to 3 groups:
򐂰 Systems gives you shortcuts to all groups defined, the OS group and Power systems
management. Power systems management shows all power systems recourses.
򐂰 Configuration takes you to configuration patterns.
򐂰 Firmware takes you to update manager in IBM Flex System Manager.
Figure 3-52 shows the Systems menu.
Figure 3-52 IBM FSM Explorer - Systems menu
Monitor menu is divided in to 5 groups:
򐂰 Status gives you shortcut to Active Status page, showing open alerts, Event log page and
Service problems page.
IBM FSM Explorer - Important information: If you choose a task from the chassis
hardware map, or any other menu than the horizontal menu, you will not be informed if it is
opened in IBM FSM Explorer or in IBM Flex System Manager.