Datasheet

10Gb Ethernet Pass-Thru Module for IBM BladeCenter 8
Network cabling requirements
The following network cables are required for the 10Gb Ethernet Pass-Thru Module:
10GBASE-SR for 10Gb ports: 850 Nm wavelength, multimode fiber, 50 µ or 62.5 µ (300 meters

maximum), with LC duplex connector
Related publications
For more information, see the following documents:
10Gb Ethernet Pass-Thru Module Installation Guide

http://ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5080966
IBM Redpaper, IBM Converged Switch B32 , REDP-4588-00

http://www.redbooks.ibm.com/abstracts/redp4588.html
IBM US Announcement Letter

http://ibm.com/common/ssi/cgi-bin/ssialias?infotype=dd&subtype=ca&&htmlfid=897/ENUS109-288
IBM BladeCenter Interoperability Guide

http://www.redbooks.ibm.com/big
IBM Redbooks publication IBM BladeCenter Products and Technology , SG24-7523

http://www.redbooks.ibm.com/abstracts/sg247523.html