Datasheet

ServeRAID-BR10il SAS/SATA Controller v2 for IBM System x 1
򔻐򗗠򙳰 ®
ServeRAID-BR10il SAS/SATA Controller v2 for IBM
System x
IBM System x at-a-glance guide
The ServeRAID-BR10il SAS/SATA Controller v2 is an ideal solution for servers that need high-speed data
transfer in disk connectivity for data backup and mission-critical applications. The controller is a low-cost
PCI Express x4 adapter with support for RAID 0, 1, and 1E. It provides the flexibility to use both SAS and
SATA hard drives. The ServeRAID-BR10il SAS/SATA Controller v2 comes in a standard form factor and
is ideal for supporting HDDs in a space-constrained server configuration.
Figure 1 shows the ServeRAID BR10il SAS/SATA Controller v2.
Figure 1. ServeRAID-BR10il SAS/SATA Controller v2
Did you know?
When used in servers such as the x3200 M3 and x3250 M3, the ServeRAID-BR10il SAS/SATA Controller
v2 is installed in a dedicated PCI Express slot on the system board. This means that the standard PCI
Express slots are available for other adapter cards.
The ServeRAID-BR10il SAS/SATA Controller v2 is an inexpensive way to implement RAID functionality
and supports RAID arrays comprised of SAS drives or SATA drives.

Summary of content (8 pages)