Datasheet

Solid State Drives for IBM BladeCenter and System x servers 7
Specifications
Table 7 presents technical specifications for the drives.
Table 7. Specifications
Specification IBM 50GB
SATA
2.5" SFF
Slim-HS
High IOPS
SSD
IBM 50GB
SATA
2.5" SFF HS
High IOPS
SSD
IBM 50GB
SATA
2.5" SFF
NHS
High IOPS
SSD
IBM 50GB
SATA
1.8" SSD
IBM 50GB
SATA
1.8" MLC
SSD
IBM 200GB
SATA
1.8" MLC SSD
Part number 43W7714 43W7722 43W7706 43W7734 43W7726 43W7746
Interface SATA I SATA I SATA I SATA I SATA II SATA II
Hot-swap drive Yes Yes Yes Yes Yes Yes
Form factor 2.5" SFF 2.5" SFF 2.5" SFF 1.8" SFF 1.8" SFF 1.8" SFF
Capacity 50 GB 50 GB 50 GB 50 GB 50 GB 200 GB
IOPS read* 4000 4000 4000 4000 20,000 20,000
IOPS write* 1600 1600 1600 1600 3000 3000
Sequential read
rate
80 MBps 80 MBps 80 MBps 80 MBps 140 MBps 150 MBps
Sequential write
rate
50 MBps 50 MBps 50 MBps 50 MBps 18 MBps 35 MBps
Shock, operating 2 ms: 60 Gs 2 ms: 60 Gs 2 ms: 60 Gs 2 ms: 60 Gs 1 ms: 1500
Gs
1 ms: 1500 Gs
Shock,
nonoperating
2 ms: 300 Gs 2 ms: 300 Gs 2 ms: 300
Gs
2 ms: 300 Gs 1 ms: 1500
Gs
1 ms: 1500 Gs
Temperature,
operating
0 - 70°C 0 - 70°C 0 - 70°C 0 - 70°C 0 - 70°C 0 - 70°C
Temperature,
nonoperating
–
40 - 70°C
–
40 - 70°C
–
40 - 70°C
–
40 - 70°C
–
40 - 90°C
–
40 - 90°C
Power operating 2.1 W 2.1 W 2.1 W 2.1 W 1 W 1 W
Power idle .5 W .5 W .5 W .5 W 0.8 W 0.8 W
* Results with 4 KB block transfers
Warranty
There is a 1-year, customer-replaceable unit (CRU), limited warranty.