Datasheet

175
The application solution designed for AFP/IPDS or
SCS printing over TCP/IP to Lexmark network laser
multifunction devices and printers.
MEMORY REQUIREMENTS
6MB minimum
DIRECT TWINAXIAL ATTACHMENT(1)
• PSF/VSE V2.2.1, 2.2.0
Any application or host software that generates the data
stream for one of the emulated printers such as:
•
PSF/MVS V2.2 or V3.1 or later
•
ES/9000 Work Station Subsystem Controller Software
•
IBM 3174 Control Unit
•
GDDM V2.3 with APAR
•
RSCS V3.2 or later
•
VTAM Printer Support R70 or later (VPS, VPS/IPDS Levi, Ray
and Shoup software)
•
PSF/VM V2.1.1, 2.1.0 (with maintenance)
Hardware
DIRECT COAXIAL ATTACHMENT(1)
• 5494 or 5394 Remote Control Unit
•
AS/400 SSP Release 7.1(2)
•
AS/400 OS/400 V3R6 with System Support Program (SSP)
Release 7.5
(2)
•
AS/400 OS/400 V3R1 to V5R2
•
AS/400 PSF/400 V3R1 to V5R2
•
IBM iSeries or AS/400e servers, e-systems or Twinaxial
Workstation Controllers
Hardware
Software
NETWORK ATTACHMENT
• MarkNet N2000, N2100, N8000 series of network print servers
• IBM iSeries or AS/400 for TN5250E SCS LU1 printing as an IBM
3812-01 printer: IBM iSeries or AS/400 OS/400 V3R7 or later
with all PTFs applied
• Using Cisco 7500 Series Routers
•
TCP/IP for VSE/ESA V1 R3 or later using General Print Server
Feature
• TCP/IP for VM/ESA Version 2 Release 4 or later (function level
310 or later)
• TCP/IP for MVS Version 3 Release 2 or later
• IBM Mainframe for TN3270E SCS (LU1) printing as an IBM 3287
printer: IBM Communications Server (CS) for OS/390 Version 2
Release 5 or later on ESA systems
•
PSF for AIX (PSF/6000) 2.1 or later
•
PSF for OS/2 (PSF/2) 2.0
•
IBM iSeries or AS/400 OS/400 V3R1, V3R2, V3R6, V3R7,
V4R1, V4R2, V4R3, V4R4, V5R1, V5R2 or later through PSF
•
PSF/VM Version 2.1 with APAR PQ39895 (PTF UQ45995)
•
PSF/VSE Version 2.2 with APAR/PTF: DY45247/UD51162
•
PSF/MVS V3.1 or later
•
TCP/IP PSF/MVS V2.2 or later
Software for AFP/IPDS Printing over
Software for SCS LU1 Printing over TCP/IP
Software for SCS LU1 Printing using a Gateway and TCP/IP
•
MarkNet X2000 (AFP/IPDS only)
• Standard Ethernet (100BaseTX/10BaseT)
Hardware
If TN3270E or TN5250 capable SNA gateway software supports
the TN3270E or TN5250 protocol according to RFC 2355, then
a TN3270E or TN5250 session can be used to print SCS jobs
directly from a mainframe or AS/400 TN3270E or TN5250 session
can be used to print SCS jobs directly from a mainframe or
AS/400
• Network printer port
CONNECTIVITY - APPLICATIONS SOLUTIONS
CURRENT
ORDERING INFORMATION
SUPPORTED
Lexmark T430 0026H0396
Lexmark T64x 0020G0738
Lexmark X644e, X646e, X646dte 0022G0351
Lexmark W840 0025A0032
Lexmark W812 0014K0071
Lexmark C76x 0016N3202
Lexmark X912e 0012N1729
Lexmark C920 0013N1341
Lexmark T63x, X63x MFP 0010G0147
Lexmark W820, X820e, X83xe 0019E0122
Lexmark X85xe 0015R0092
Lexmark C77x 0020B3202
Lexmark C78x 0010Z0401
Lexmark X782e 0021J0579
Lexmark X94x 0021Z0368
Lexmark C935 0021Z0364
CURRENT SUPPORTED
COAX/TWINAX ADAPTER
Lexmark C912
Lexmark W820, X820e, X83xe
Lexmark T63x, X63x MFP
0014S0240
0014S0240
0014S0240
0014S0240
0014S0240
Lexmark X912e
0014S0240Lexmark W840
Lexmark W812
0014S0240Lexmark T64x
Lexmark X85xe, X64x 0014S0240
0014S0240Lexmark X94x
0014S0240Lexmark C78x
Lexmark C935 0014S0240