Manual

30
Erasing Caller ID Records
In order to delete a specific Caller ID record in the log:
1. Using the [<] or [>] key, find the particular record you would like to delete..
2. Press the [ERASE] key. The LCD display will indicate that the record has been deleted.
3. You may erase all caller information records simultaneously by pressing [ERASE] from the sum-
mary Call ID display.
Returning a Call on the Caller’s List
When reviewing Caller ID entries, you may decide to return a particular call immediately. To do this:
1. Press either the [<] or [>] key to find the particular call you would like to return.
2. Press the [SHIFT] key.
3. Press the [DIAL] key. The number will be automatically dialed and displayed.
4. If the phone number to be called is long distance (10 digits), a1 must be added to the front of
the number to be dialed. To do this, after locating the number in the Caller ID log, go off-hook
(pick up the handset or press [SPKR]), dial a “1”, then press [SHIFT] followed by [DIAL].
Saving a Caller’s Number to a Speed Dial Key
When reviewing your Caller ID records, you can save the number to a Speed Dial key.
1. Locate the Caller ID record to be stored.
2. Press the [STORE] key.
3. Press the [<] key. The number selected during step 1 will appear.
4. Press the speed dial key selected for this entry.
5. You will hear a short confirmation tone indicating you have successfully stored the phone number
to the Speed Dial key.
6. If the phone number to be called is long distance (10 digits), a1 must be added to the front of
the number. To do this, repeat steps 1 and 2 above, press “1” on the dial pad, then resume step 3
above.