Installation manual

A Guide To IBM System x Power Distribution Units (PDU) - International

P a g e | 8 © IBM Corporation 2012

IBM Front End PDU

Input Line Cords By PDU Model – Line cord comes with the PDU

39Y8934 – IBM DPI IEC 309 P+N+G (2.5m) line cord

32A / 220-240VAC Single Phase

39Y8935 – IBM DPI IEC 309 P+N+G (2.5m) line cord

63A 220V-240VAC Single Phase

FC: A11V = 39Y8934

FC: A11W = 39Y8935

39Y8936 – IBM DPI KSC 8305 30A (2.5m) line cord

30A 230VAC Single Phase

39Y8937 – IBM DPI AS/NZS 3112 32A (2.5m) line cord

32A 220VAC Single Phase

FC: A11Y = 39Y8936

FC: A11X = 39Y8937

Monitorable: No

Switched Outlets: No

Ground Screw: No

See the Front End PDU Mounting Options section on page 35 for

mounting option details.

Accessory Kit

(1) Large vertical-mounting plate

(1) One country or region-specific power cord

Miscellaneous hardware kit (for attaching the Front-end PDU to

a mounting plate and installing the Front-end PDU in a rack

cabinet) and cable straps

For an overview of IBM Basic PDUs, go back to the beginning of this section IBM Basic PDUs on page 6.

39Y8934, 39Y8935, 39Y8938, 39Y8937

Front Panel

Back Panel

C19

16A

20A

Outlet

Amperage

Outlet Type

Internal Circuit Layout

Fuse

Amperage