Installation manual

A Guide To IBM System x Power Distribution Units (PDU) - International
P a g e | 39 © IBM Corporation 2012
Enterprise Shallow PDU Mount Options
Hardware is included for EIA (U space) mounting, side of rack, and side pocket mounting. Only sided of rack and side pocket
mounting installation is approved for reconfigured shipment in an IBM rack.
Horizontal installation of a PDU is not supported during relocation or shipping of a rack cabinet. You must remove any
horizontally mounted PDUs from the EIA mounting space before you relocate the rack cabinet.
Supported with:
39Y8941 – DPI Enterprise PDU (C13)
39Y8948 – Enterprise PDU (C19)
Mounting In the Side of a Rack
The vertical mounting brackets, which ships
with the IBM Enterprise PDUs, will need to be
used for this installation option.
Mounting In IBM Enterprise Rack (9308 & 1410) & IBM Enterprise V2 Rack (9363) Rear Zero Pocket
The horizontal mounting brackets, which ships
with the IBM Enterprise PDUs, will need to be
used for this installation option.