Installation manual

A Guide To IBM System x Power Distribution Units (PDU) - International
P a g e | 35 © IBM Corporation 2012
Front End PDU Mount Options
Units come with side wall mounting hardware only; however, Front End PDUs can be mounted in the EIA (U) space using the rack
PDU hardware. Front End PDUs only support reconfigured shipment in side panel. Hardware is included for both EIA mounting
and side of rack mounting.
You must remove any horizontally-mounted Front End PDUs from the EIA mounting space before you relocate your rack
cabinet. Horizontal installation of Front End PDUs is not supported during relocation or shipping of a rack cabinet.
Supported with:
39Y8934 – Front End PDU
39Y8935 – Front End PDU
39Y8936 – Front End PDU
39Y8937 – Front End PDU
Mounting In Side of Rack
The large vertical-mounting plate, which ships
with the IBM Front End PDU, will need to be
used for this installation option.