Installation manual

A Guide To IBM System x Power Distribution Units (PDU) - International

P a g e | 29 © IBM Corporation 2012

40K9612 - IBM DPI 32A Cord (IEC 309 P+N+G)

IEC 309 P+N+G (4.3m) - 32A / 220-240VAC Single Phase

Only a receptacle or a connector is needed to mate with the plug on the PDU input line cord. See section “IEC 309 Pin &

Sleeve Plug Decode” on page 60 in this document for further details on IEC309.

Matching receptacle listing 332R6W IP-67 HUBBELL, Hubbell receptacle P/N HBL332R6W

Matching connector listing 332C6W IP-67 HUBBELL, Hubbell connector P/N HBL332C6W

Used with:

46M4002 – 1U 9 C19 / 3 C13 Switched and Monitored

46M4004 – 1U 12 C13 Switched and Monitored

71762MX – DPI Ultra Density Enterprise PDU+

71762NX – DPI Ultra Density Enterprise PDU

39M2816 – DPI Enterprise PDU+ (C13)

39Y8941 – DPI Enterprise PDU (C13)

39Y8948 – DPI Enterprise PDU (C19)

40K9613 – IBM DPI 63A Cord (IEC 309 P+N+G)

IEC 309 P+N+G (4.3m) - 63A / 220-240VAC Single Phase

Only a receptacle or a connector is needed to mate with the plug on the PDU input line cord. See section “IEC 309 Pin &

Sleeve Plug Decode” on page 60 in this document for further details on IEC309.

Matching receptacle listing 363R6W IP-67 HUBBELL, Hubbell receptacle P/N HBL363R6W

Matching connector listing 363C6W IP-67 HUBBELL, Hubbell connector P/N HBL363C6W