Installation manual

A Guide To IBM System x Power Distribution Units (PDU) - International

P a g e | 14 © IBM Corporation 2012

IBM 1U Higher Voltage DC PDU

Input Line Cords

Attached 90A DC line cord

90A@240-380VDC (4.3m) line cord hardwired (i.e. no plug)

FC: A580 = 44T0966

Monitorable: No

Switched Outlets: No

Ground Screw: Yes – On Back Panel

See the Enterprise Deep PDU Mounting Options section on page 41 for

mounting option details.

Accessory Kit

(2) Vertical mounting brackets (for all rack cabinets)

(2) Horizontal mounting brackets

(1) 1U blank filler panel

(2) Adjustable mounting rails (for horizontal mounting in all rack

cabinet)

Miscellaneous hardware kit (for attaching the mounting

brackets to the PDU and installing in a rack cabinet) and cable

straps

For an overview of IBM Basic PDUs, go back to the beginning of this section IBM Basic PDUs on page 6.

44T0966

Front Panel

Back Panel

Internal Circuit Layout

Outlet Type

Outlet

Amperage

Breaker

Amperage

RF-203P

15A

Outlet

Number

Note: RF-203P outlet refers to Rong Feng RF-203P DC outlet.