Datasheet

Electrical specifications
Low-voltage models
• 110
—
127 V ac at 50 to 60 +/-3 Hz, nominal
• 99
—
137 V ac, limits of operating range
High-voltage models
• 220
—
240 V ac at 50/60 +/-3 Hz (not available in all
countries)
• 198
—
259 V ac, limits of operating range
Power consumption
All
Printing states models
- Off 0 W
- Continuous Printing 520 W
- Ready Mode 12 W
- Sleep/Power Saver Mode 10 W
Maximum Current while printing
120 Volts 9.1 A
230 Volts 4.0 A
Average Current while printing
120 Volts 6.0 A
230 Volts 3.1 A
Notes
• Using a 220 VAC to 110 VAC power converter with the
low voltage model is not recommended.
• All models are ENERGY STAR compliant.
Acoustics
Infoprint 1622
Declared A-Weighted
Declared A-Weighted Sound Pressure Level
Sound Power LpAm (dB) Bystander
Mode Level LWAd (B) Position
Printing 6.6 52
Printing Quiet 6.1 47
Idle 3.1 18
Infoprint 1612
Declared A-Weighted
Declared A-Weighted Sound Pressure Level
Sound Power LpAm (dB) Bystander
Mode Level LWAd (B) Position
Printing 6.6 52
Printing Quiet 6.2 48
Idle 3.3 17
Notes
1. LWAd is the statistical upper-limit A-weighted sound
power level (rounded to the nearest 0.1 B);
2. LpAm is the mean A-weighted emission sound
pressure level measured at the 1-meter bystander
positions (rounded to the nearest dB);
3. All measurements made in conformance with ISO
7779 and declared in conformance with ISO 9296.
Planning information
Customer responsibilities: These printers are designed
as a Customer Setup Unit (CSU). The customer is
responsible for:
• Adequate site, system, and other vendor preparation
• Receipt at the customer location and placement of the
printer
• Installation and configuration of the printer and
features by following the installation instructions,
including:
− Installing and maintaining cables
− Loading print media and clearing jams
− Performing low-level problem determination
− Ordering and installing supplies and consumables
• Working with IBM Technical Support to complete
low-level problem determination including:
− Downloading and installing microcode updates as
directed by the IBM Technical Support Center
− Replacing defective features that were installed as
part of the customer setup process
It is the customer′s responsibility to order and maintain
an adequate inventory of toner cartridges and
maintenance supplies.
Cable orders: Attachment cables are not provided with
the printer and must be provided or purchased by the
customer. They are the responsibility of the customer
and are not covered by product warranty or post-warranty
services.
The Parallel printer cable features are recommended
when attaching the printer to a Parallel port.
The Universal Serial Bus (USB) cable feature is
recommended when attaching the printer to a USB port.
Packaging: Contents may vary by country.
Number
Product Description of boxes
Infoprint 1622
Printer Low-volt printer with 64 MB memory, 1
(Models 501, x51) 10/100BaseTX, 6.0K print cartridge,
Drivers, Utilities, and
Publications CD,
Setup sheet, Safety notices sheet,
Supplies program flyer,
Warranty sheet, power cord
Printer High-volt printer with 64 MB memory, 1
(Models 502, x52) 10/100BaseTX, 6.0K print cartridge,
Drivers, Utilities, and
Publications CD,
Setup sheet, Safety notices sheet,
Supplies program flyer,
Warranty sheet, power cord
Supplies: The Infoprint 1622 is shipped with a
6,000-impressions (1) print cartridge. Replacement
6,000-, and 11,000-impressions (1) print cartridges are
available.
It is the customer′s responsibility to order and maintain
an adequate inventory of toner cartridges and
maintenance supplies.
Consumables: The following replacement supplies are
available for Infoprint 1622:
Part
Description Model number Apx. avg. yield (1)
6.0K Toner Cartridge All 39V1639 6,000 impressions
Return Program 6.0K All 39V1640 6,000 impressions
Toner Cartridge
11.0K Toner Cartridge All 39V1643 11,000 impressions
Return Program 11.0K All 39V1644 11,000 impressions
Toner Cartridge
AG06-0786 -2-