IBM Bluetooth PC Card from IBM Installation and User’s Guide 19K4260
Note: Before using this information and the product it supports, read Appendix E, “Product warranties and notices” on page E-1. First Edition (August 2000) © Copyright International Business Machines Corporation 2000. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents About this book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Installation guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 User’s guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1 Appendix A. Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv Bluetooth PC Card from IBM: Installation and User’s Guide
About this book This manual contains instructions for installing and using the Bluetooth™ PC Card from IBM®. The manual is divided into three parts: • Installation guide The Installation guide contains the product description and quick installation instructions. • User’s guide The User’s guide provides instructions on operating the Bluetooth Software Suite. • Appendixes The appendixes contain reference tables, regulatory information, help and service information, the product warranties, and notices.
vi Bluetooth PC Card from IBM: Installation and User’s Guide
Installation guide 1. This section contains quick instructions for installing and operating the Bluetooth™ PC Card from IBM® and the Bluetooth Software Suite. For more detailed instructions, refer to the User’s guide on page 2-1. Note: The documents supporting the Bluetooth software suite are also provided in PDF format. To view these documents, you must have Adobe® Acrobat® Reader.
Before you begin Before you begin installing and using your Bluetooth PC Card, review the following terms that will be used throughout the manual. • Authentication: A security mechanism that prevents access to critical data and makes it impossible to falsify the origin of a message. • Device address: The unique address of a Bluetooth device. • Device discovery: Before a link can be established, a Bluetooth device needs to "discover", or find, the other Bluetooth devices that are active and in range.
b. Click the icon that corresponds with your CD-ROM drive. c. Select Setup, then click OK. The Run windows opens. d. Click OK. 2. Click Yes to restart your computer. 3. Select Yes, I want to restart my computer now, then click Finish. Your computer will restart. 4. The Choose Setup Language window opens. Click the file of the language you want. 5. Follow the instructions on your screen. At the end of the process, indicate that you want to restart your computer again. The software installation is complete.
5. Double-click the Win9x folder, then select dgahci.vxd. 6. Click OK. 7. Click OK. 8. Click Next, then click Finish. Note: If the Version Conflict window appears, continue with steps 9 and 10. Otherwise, the device driver installation is complete. 9. Click Yes. 10. Click No. The device driver installation is complete. Windows 98, Windows 98 SE, or Windows Me 1. Insert the PC Card into either of the PC Card slots (PCMCIA slots) on your computer. The Insert Disk window will appear.
After your computer restarts, the device driver installation is complete Creating network profiles During the installation of the application software, the Network Manager Wizard creates two network profiles on your computer. One of these profiles saves your current network settings; the other is used for Bluetooth ad hoc networking. For more information on Bluetooth networking, refer to the User’s guide on page 2-1.
1-6 Bluetooth PC Card from IBM: Installation and User’s Guide
1. ® Bluetooth TM IBM PC Bluetooth Software Suite !"# $ %& ' ( ) * 2-1 + ,-./ 01" ! Note: Bluetooth 23 456 7 89: PDF ;< =>?"@ ! @# AB9:-./ C Adobe® Acrobat® Reader D EF !Adobe Acrobat Reader DG HI J "@ K LM NO PQ CD-ROM R# S ! 1. [ J ] TJ -UVWU ! 2. [ 3X Y-Z[ \] ] -UVWU 3. X:^Acrobat^ar405eng.exe _` a b9c ! 4.
@# êDé @ K LMëì CLM íîï ðñò01 " ! Bluetooth PC 8-óÕCô õö÷I6 8"@ CNO 8ø-ð¨Â01" ! • ÂÓÖFp J× 6UÈ -ØÙ |{ |ÚWÈ ÂÓ Þ-z CÈÉIVlÊÌ! • pu 6 k Bluetooth pu &÷ k • pu ùúV U-¨© Cô Bluetooth pu ûü pu ùú ý 6UlÊb Ko C»å Bluetooth þ-%ùú* KÔ Âà CEFD{ ! • pu YBluetooth þ D´ Y » pu ÂÓ pu Y C S 8"@ ! • ö J pu xy- ó Cpu !xy Piconet pu a3ÊWU-G n ! • Park ` K J u % b *!Park k k b pu pu Piconet f 6UlÊb K{ ÀÁD
Bluetooth Software Suite NO Zg ho ð8 G HI Jf ç+k Bluetooth Software Suite - ! lÊ ¤ l¥8 Windows 95 OSR/2 1. Bluetooth 23 456 CD-ROM - CD-ROM a b _ ! µ 23 456 K0 - ó ! D ó"@K LM NO Zg ho 01" ! a. [ J ] -UVWU [ 3X Y-Z[ \] ] -UVW U "# [ ./ ] -UVWU ! b. ð8 CD-ROM a b C6 G -UVWU ! c. [Setup] -!" [OK] -UVWU ![ \] ] 4Ê 4D S ! d. [OK] -UVWU ! 2. [ ] -UVWU G HI J-#$ 3. [ G HI J-#$ J-#$ #$ !G HI JD#$ ! 4.
Bluetooth NO Zg ho ð8 G HI Jf ç+k lÊ ¤ l¥8 Bluetooth pu a u- ! Note: BlueTooth pu a u- Software Suite - ! Cô BlueTooth Note: BlueTooth pu a u- Cô £ -.23 456-6 CR ä 01" ! -.23 456-G HI Jf / 0EFDCLM pu a u 0 -.23 45 6 1 q-./ 01" ! Windows 95 OSR/2 1. PC -G HI J PC nW (PCMCIA nW ) t #R _ ![ pÊ U pÊ U _ ] 4Ê 4D S ! 2. Bluetooth CD-ROM - CD-ROM a b _ [OK] -UVWU ! 3. [ .
4. a u D;Ô{ |# [ %& ] -UVWU 5. [ ] -UVWU G HI J-#$ ! G HI JD#$ |# pu a u ! ! @ %& Windows 2000 1. PC -G HI J PC nW (PCMCIA nW ) ÈW 01" ![ pÊ U _ ] 4Ê 4D S ! Note: Windows 4 < =Ko|pu a u- ! a u L5-Z[ C 6Õ#@|LM CD-ROM a bf 78K bpÊkU V-!" ! a u b pÊkU V /DRIVERS pÊkU V 9: ! 2. [Found New Hardware Wizard] 4Ê 4D Bluetooth PC "@ !def Zg ho 01" ! 3. [Found New Hardware Wizard] 4Ê 4D Bluetooth qJ8 ,g"@ !def Zg h ! 8 ,g sW 63 4.
&!'( ) *# +,& & pu a u ¯ qn a¥ G HI Jf 9: C CAu ,è Bluetooth 23 456 B !Au ,è Bluetooth Software Suite DG HI J "@ CLM C 6qVw ¤è 23 456 -%& Cô Au ,è -6 K¿@DK{ ÀÁ!A u ,è 23 456 P = =6 S ! &!'( ) *# +,& -.& NO PQ Au ,è Bluetooth 23 456 ! 1. 6 åE-!" -!" ! 2. £ qn a¥-FG C -P 6 6Õ#@|# P6 ! 3. [ J ] → [ qn qn a¥ ] → [Bluetooth Software Suite v...] -UVWU ! 4.
User’s guide 2. This User’s guide provides product and software descriptions, installation instructions, and user’s information for the Bluetooth™ Software Suite. If you need basic information on Bluetooth wireless technology, see the Installation guide on page 11. Both the Installation guide and this User’s guide are included on the Bluetooth Software Suite CD. These two documents are available from the Windows Start menu when you have the Bluetooth Software Suite.
The Bluetooth Neighborhood window To open the Bluetooth Neighborhood, double-click the shortcut placed on your desktop during installation. The Bluetooth Neighborhood window displays the following: 1. Menu bar: Contains standard Microsoft Windows® pull-down menus and a Bluetooth menu. From the menu bar, you can access the Bluetooth Software Suite online help. 2. Tool bar: Contains standard Windows tools like Back, Forward, View, etc.
4. View details: Displays various information on the items in the list-view. For more information, see “View details” on page 2-12. 5. Local Profiles/Local Services bar: Shows the local profiles or the local services that your Bluetooth device supports. For more information, see “Profiles and services”. 6. Status bar: Provides information on the item currently selected in the Bluetooth Neighborhood. 7. List-view: Displays the contents of the folder, remote device, etc.
Although the function of the Local Profiles bar is to display the profiles your device supports, the Local Services bar shows what you will actually use when operating the Bluetooth Neighborhood. Facilitated by a profile, each of the services represents a specific operation that your device can carry out. An example of a service is audio, or sound transfer, which is facilitated by the Generic Audio profile.
List-view The list-view in the main window contains three elements: My Inbox, My Shared Files, and a list of discovered remote devices. When an item is selected in the Bluetooth Neighborhood, such as My Inbox or a remote device, the list-view displays the contents of that item. My Inbox This is where your device receives objects like electronic business cards, messages, and notes. My Inbox is a folder of files like any other Windows folder, and its contents can be copied, renamed, and dragged and dropped.
Desktop computer Server-class computer Note: The list-view does not show your local device, only remote ones. When service discovery has been carried out on a remote device, the list-view will change to show the services facilitated by the remote device in question. Each service is represented by an icon. The icons will also indicate whether the devices are “linked," “bonded," or both. Linked Bonded Both The icons also indicate whether a remote device is in range or out of range.
Appendix B, “List view icons” on page B-1 contains a complete list of the various remote device and service icons. The list-view settings can be changed as in other Windows list-view settings; you can for instance change the size of the icons or have the elements displayed as a list. For Bluetooth Software Suite settings information, see “View details” on page 2-12.
3. In the Bluetooth Device Name field, type the name you want your device to present when detected by devices; then click OK. Other Bluetooth devices that detect your device now see it as the name you have set. Device discovery Before your local device can communicate with a remote Bluetooth device, it must discover the remote devices that are available and within range. This is called device discovery. To perform device discovery, do the following: 1. Click Bluetooth, then click Device Discovery.
2. When device discovery is finished, the list-view displays the remote devices within range that are currently available. You can also see previously discovered devices that are no longer available. Note: The main window list-view does not show your local device, only the discovered remote ones. There are alternative ways of performing device discovery: • When the main window list-view (with discovered devices) is displayed, press F5. This updates the list-view.
When the service discovery has been performed, the list-view displays the services that the remote device supports. In some situations, it might not be possible to carry out service discovery. There could be a number of reasons for this. For example, the remote user might have set up his device to reject link establishment attempts (see “The Trust tab” on page 2-51). If service discovery (or any other activity) is not carried out successfully, a window opens explaining what went wrong.
In some situations, it might not be possible to carry out link establishment. There could be a number of reasons for this. For example, the remote user might have set up his device to reject link establishment attempts (see “The Trust tab” on page 2-51). If link establishment (or any other activity) is not carried out successfully, a window opens explaining what went wrong. Disconnecting a link establishment To disconnect an established link to a remote device, do the following: 1.
View details In the Bluetooth window, you can change the settings of the list-view. For example, you can change the settings to view details. To view details, do the following: 1. On the menu bar, click View. 2. Click Details. You can also click the View icon on the tool bar the appropriate number of times until the details are displayed. The type of details displayed depends on the contents of the list-view: remote devices, remote services, or the contents of My Inbox or My Shared Files.
Remote device details In the main window, the list-view can display information on each of the remote devices discovered: • Name: The name the remote user has chosen for the device to present when discovered by other devices. • Class: The type of the remote device (device class), such as a desktop computer, a notebook computer, or a mobile phone. • Status: Whether the remote device is within range. • Bonding: Whether your local device and the remote one have bonded.
• • • • Name: The name given to the object or file when it was saved. Size: The size of the object or folder. Type: The type of the object or folder, for instance “vCard File". Modified: The date when the object or file was last saved. Device folders In the Bluetooth Neighborhood main list-view, you can create device folders, which are folders containing a number of remote devices. You can communicate with a device folder the same way you can communicate with any single remote device.
You can create as many device folders as you like, and you can include as many devices in each folder as you like. Communicating with a device folder is done in exactly the same way as with a single remote device. Online help You can open the Bluetooth Software Suite online help by clicking the Help in the menu bar, or by pressing F1. Help provides you with links to the online version of this User’s guide. The design of the Help function is similar to the Windows Help.
Each tab helps you locate information in a different way. To locate topics, click the Contents tab; to look up keywords, click the Index tab; and to search for text, click the Search tab. Local services This section provides information on the local services you can use with Bluetooth wireless technology. Object transfer In the Bluetooth Neighborhood, you can transfer such objects as business cards, email messages, and notes.
2. Arrange the Bluetooth Neighborhood and Microsoft Outlook Contacts windows so that both are visible on the screen. 3. Drag the item containing your own contact information into the Local Services bar.
A new icon on the Local Services bar shows that your default business card is now available for transfer to remote devices. Exchanging business cards from the Object Editor: If your computer does not have Microsoft Outlook, you can exchange business cards from the Object Editor. To exchange from the Object Editor, do the following: 1. On the Bluetooth menu, point to Profile Properties, and then click OBEX Object Push. The OBEX Object Push Properties window opens.
2. At the top of the window, click the Object Push Settings tab. 3. In the Default Business Card field, click Create New. The Object Editor opens.
4. In the Object Editor, type the information you want to include in your default business card. You can include information about your name and one or more e-mail addresses, telephone numbers, and addresses. 5. To save the business card, click File, then click Save. 6. Click OK to exit the Object Editor. The OBEX Object Push Properties window opens. Here you will see the name of your default business card, which is the same as the name typed in the Object Editor.
7. Click OK to complete the creation of the new default business card. A new icon on the Local Services bar shows that your default business card is now available for transfer to remote devices. To edit an existing business card, click Edit rather than Create New in step 3. Business card transfer: Before your default business card can be transferred to remote devices, you must make it available among your local services as described in “Making default business cards available” on page 2-16.
From the Business Card sub-menu, you can select from the following: • • • Push business card: To transfer your business card Pull business card: To transfer a business card from a remote device Exchange business cards: To exchange business cards with a remote user Sending business cards directly from Microsoft Outlook Microsoft Outlook users can send objects (like messages or notes) directly from Microsoft Outlook.
Receiving objects When your local Bluetooth device receives an object (such as a default business card, message, or note) from a remote device, the object is placed in My Inbox. • If you have Microsoft Outlook, the object opens in Microsoft Outlook when you double-click it. • If you do not have Microsoft Outlook, the object opens in the Object Editor when you double-click it. You can open a received object directly from My Inbox, or you can drag the object to wherever you want to store it.
The Object Editor window opens. To create an object in the Object Editor, do the following: 1. Click File, then click New.
2. Click the object you want to create, such as a VMessage, VCard, or VNote. Cards are created in the Object Editor itself (by typing the information you want to include); messages and notes are created in a new window, as shown in the following illustration. 3. Type the information you want to be included in the object. 4. Save the object. • If the object is a message or a note, click File, then click Save As in the window where you typed the message or note.
5. Select the location and name of the new file. 6. Click Save. When you have saved the file, you can transfer it as you would any other file using the Bluetooth Neighborhood. For more information, see “File transfer”. File transfer File transfer is a way of sharing files with others. In the Bluetooth Neighborhood, you can make a file available to a remote user by placing it in the folder My Shared Files.
Sending a file to a remote device If you want to transfer a file to the Shared Files folder of a remote device, you can do so in a number of ways: • Drag the file from where it is stored to the remote device (or device folder). • Perform service discovery on the remote device; then drag the file from where it is stored into the remote Shared Files folder. • Perform service discovery on the remote device; then open the remote Shared Files folder.
No matter which way you choose to transfer a file to a remote device, the user of that device receives the file in the Shared Files folder. Receiving files When your local Bluetooth device receives a file sent from a remote device, the file is placed in your My Shared Files folder. You can then open the received file directly from My Shared Files, or you can drag the file to wherever you want to store it.
• Using your computer as a Bluetooth Speaker Phone: Connect to a Bluetoothenabled modem and make telephone calls, using the built-in microphone and speaker of the computer for the conversation. Link establishment There are two ways of establishing an audio link: • Drag the local service Audio to a remote device (or device folder). • Perform service discovery first, then drag the local service Audio to the remote service Audio.
2. Click enable or disable. When the speaker is enabled, you can make use of the speaker phone feature. For more information on audio settings, see “Audio settings” on page 2-43. Bluetooth COM ports Physical communications (COM) ports are used when two serial devices are connected by means of a cable. A Bluetooth COM port, however, is a virtual COM port providing a wireless alternative to a physical one.
The same profile must be associated with the local Bluetooth COM port and the remote one you want to connect to. Therefore, before you can establish a serial Bluetooth COM port link to a remote device, you must associate the Serial Port Profile with a Bluetooth COM port, and then add the Bluetooth COM port to your computer. For link establishment to be possible, the remote device must also have a Bluetooth COM port with the Serial Port associated with it.
2. Select the Bluetooth COM port you want to add and the profile you want to associate with it. Note: Some programs (like HyperTerminal) cannot detect COM ports higher than 4. You can add only Bluetooth COM ports that are not already in use. Only available Bluetooth COM ports are displayed on the list. 3. To confirm the settings, click Add. The new Bluetooth COM port is now included on the Bluetooth Neighborhood Local Services bar.
2. Click Remove. A window opens prompting you to confirm the port deletion. 3. To confirm that you want to delete the Bluetooth COM port, click Yes. The Bluetooth COM port is now removed from the Local Services bar. Associating and removing profiles from existing Bluetooth COM ports In the Bluetooth Configuration Tool window, you can see which profiles are associated with which Bluetooth COM ports. You change these settings to associate the profiles you need with an existing Bluetooth COM port.
Bluetooth COM port link establishment When you have added a Bluetooth COM port to the Local Services bar, you can establish a link to a remote device. To establish a link to a remote device, drag the Bluetooth COM port icon to the remote device (or device folder). You can also perform service discovery; then drag the local Bluetooth COM port icon to a remote Bluetooth COM port icon. The link established between your local device and the remote one can now be used exactly as if it were a wired link.
The LAN service provides a serial Bluetooth COM port connection for your convenience. This means that you can choose to use it for accessing a LAN, but you could use any other Bluetooth COM port as well. Note: To set up the LAN service, refer to the Windows user’s manual for instructions. Links can be established by dragging and dropping in the Bluetooth Neighborhood.
Note: To set up the DUN service, refer to the Windows user’s manual for instructions. Links can be established by dragging and dropping in the Bluetooth Neighborhood. Drag the DUN icon from the Local Services bar to one of the following in the list-view: • • The remote device (or device folder) The remote DUN service For information on how to set up the program to dial up automatically when a DUN link is established, see “Dial-up networking settings” on page 2-48.
Note: The FAX Profile requires a Bluetooth COM port. By default, the profile is associated with Bluetooth COM port 7. For more information, see “Bluetooth COM ports” on page 2-30. Setting up Bluetooth networks During the installation of the Bluetooth Software Suite, the Network Manager Wizard created two network profiles on your computer: one saving your current network settings and one to be used for Bluetooth piconet networking.
The Network Manager window opens, and you can view or change the network settings. The settings are used when you establish a network link as described in “Network link establishment”. Network link establishment Establishing a Bluetooth piconet link is done in the same way as you establish other Bluetooth links: In the Bluetooth Neighborhood main window, drag the local service Network to the remote device, device folder, or service.
You can now use the Bluetooth network in the same way as a wired network. Local device settings The Bluetooth Software Suite provides you with general information on the profiles that your device supports. For each profile, you can see the following: • • • • The profile version A description (e.g., the name of the profile) The company name The copyright holder This information is included in the Profile Properties window.
The Properties window for the selected profile opens, as shown below. Enabling and disabling a profile You can enable or disable each of the profiles that your device supports. If you enable a profile, remote users will be able to access the services associated with the profile. If you disable a profile, remote users will not be able to access the services associated with the profile. To enable or disable a profile, do the following: 1. Click Bluetooth, and then click Profile Properties. 2.
Object transfer settings The OBEX Object Push profile is used for transferring objects such as messages, notes, and cards. In the Object Push Settings window, you can view or edit the location of the physical Inbox folder and the default business card. You can also make decisions concerning the security aspects of receiving objects from remote devices. To open the Object Push Settings window, do the following: 1. Click Bluetooth, and then click Profile Properties. 2. Select OBEX Object Push. 3.
card. Click Edit if you want to edit an existing business card. For more information, see “Making default business cards available” on page 2-16.
In the File Transfer Settings tab, you can view the following: • Shared Files Folder: By default, this folder is placed in My Documents in a folder named Bluetooth. However, you can move it to any location you want. To browse for a different location, click ....
• The Bluetooth speaker phone feature, using the computer speaker and microphone like a phone, with the audio coming from an ordinary sound card. For information on how to establish and use audio links, see “Audio settings” on page 2-43. By default, your computer is set up as a Bluetooth speaker phone. If you want to change this default setting, do the following: 1. Click Bluetooth, then click Profile Properties, and then click Generic Audio. 2.
speaker phone feature. This is done by the Bluetooth Speaker Phone Setup Wizard. However, as computers are very different, in some cases it is necessary to adjust the settings manually to get the best possible sound quality. You can do this from the Audio Speaker Phone window in the Bluetooth Configuration Tool, or from the Bluetooth Speaker Phone Setup Wizard. Adjusting the speaker phone settings from the Audio Speaker Phone window: To view or edit the Bluetooth speaker phone settings, do the following: 1.
You can configure your Bluetooth speaker phone in one of three ways: • To have the Bluetooth Speaker Phone Setup Wizard automatically configure you computer, click: • To configure your computer manually, click: • To use the Bluetooth default settings, click: 2-46 Bluetooth PC Card from IBM: Installation and User’s Guide
Follow the on-screen instructions to complete the configuration of your copmuter for the best sound performance of the Bluetooth phone feature. LAN access settings In connection with LAN link establishment, the Bluetooth Software Suite can establish a dial-up connection automatically. To set this up, do the following: 1. Click Bluetooth, then click Profile Properties, and then click LAN Access. 2. In the LAN Access Properties window, click the LAN Access Settings tab. 3.
When you establish a LAN link as described in “LAN service” on page 2-34, the Bluetooth Software Suite automatically establishes a dial-up connection. Dial-up networking settings In connection with DUN link establishment, the Bluetooth Software Suite can establish a dial-up connection automatically. To set up your Bluetooth Software to establish a dial-up network automatically, do the following: 1. Click Bluetooth, then click Profile Properties, and then click Dial-up Networking. 2.
Bluetooth neighborhood properties The Bluetooth Software Suite provides information on the properties of the Bluetooth Neighborhood. To access this information, click Bluetooth → Bluetooth Neighborhood Properties. The Bluetooth Neighborhood Properties window opens.
Displayed at the top of the window is the name of your local device. (For information on how to name your local device, see “Naming your local device” on page 2-7.) The window also contains the following: • General Information shows the identity information that, in addition to the name of your device, is sent to remote devices performing device discovery or service discovery on your device.
certain intervals. If you choose for device discovery to take place automatically, you can set the duration of the interval between device discovery sessions. Device Discovery Length In Device Discovery Length you can set the number of seconds that you want device discovery to last. The default setting is 10 seconds. However, if for some reason it is difficult for two devices to discover each other, you can increase the duration.
• • Prompt you before accepting link establishment Accept link establishment automatically To have the default trust relationship settings applied to all existing discovered devices, click Apply to all devices. Note: If you want to make trust relationship settings for a particular remote device, rather than for all remote devices, you can do so from the Trust tab of the Remote Device Properties window.
relationship you want for the device. The new settings are now applied to the remote device the next time it attempts to connect to your local device. The Security tab In the Security tab, you can make a number of decisions concerning the security of your local device. Security Mode Security Mode can be set to either No Security or Link level security. If a device has selected link level security, no remote device can connect to it without bonding (see “The Bonding tab” on page 2-54).
Discoverability Mode Discoverability Mode refers to whether other devices can discover your device. In other words, selecting non-discoverable mode is a way to prevent remote devices from discovering your device. The Bonding tab Bonding refers to the creation of a link key – a bond – between two devices. Bonding is used when a device requires link level security (see “The Security tab” on page 2-53 for more information).
the duration of a bond between your device and a particular remote device, see “The Trust tab” on page 2-51. Bluetooth unit settings The settings of the Bluetooth unit are controlled from the Bluetooth Control Center. From this application, you can enable or disable the Bluetooth unit. Also, the Bluetooth Control Center icon indicates the state of the Bluetooth unit. Enabling or disabling the Bluetooth unit From the Bluetooth Control Center, you can enable or disable the Bluetooth unit.
Remote device settings For information on the properties of a remote device, do the following: 1. Right-click the remote device. 2. Click Properties. The Remote Device Properties window opens.
• The name of the remote device • General information: Provides the identity information of the remote device. • Historical Information: Provides information on when the remote device was last seen by your device, and when it was last linked to it. • Services used: Provides information on which services of the remote device are currently connected to your local device, if any. You can also see what role the remote device plays in the piconet, that is, if it is a master device or a slave device.
The Trust tab In the Trust tab of the Remote Devices Properties window, you can make settings for the individual remote device concerning: • Trust relationship: The way your local device reacts if the remote device attempts to establish a link to it.
Note: You can make similar settings in the Trust tab and the Bonding tab of the Bluetooth Neighborhood Properties window (see “Bluetooth neighborhood properties” on page 2-49). However, the settings made in those windows are applied to all remote devices discovered; the settings in the Trust tab of the Remote Device Properties window apply only to a particular remote device.
4. Under the Loop Mode heading, select Single Loop (to run the test once) or Infinite Loops (to run the test multiple times). 5. To start the test, click Run. Note: If you selected Infinite Loops, the test runs until you click Stop. In Loop Count you can see the number of loops tested. The number of Errors should always be zero. If the test shows one or more errors, your hardware has probably not been installed correctly. Do the following: • Be sure that the hardware is installed correctly.
Appendix A. Profiles The following table shows the profiles that the Bluetooth Software Suite currently supports and what role each profile plays.
A-2 Bluetooth PC Card from IBM: Installation and User’s Guide
Appendix B. List view icons In the Bluetooth Neighborhood list view, the following icons are used to represent remote devices and services. Remote device Icon Desktop computer Laptop computer Server-class computer Handheld PC/PDA Palm-sized PC or PDA Cellular phone Cordless phone © Copyright IBM Corp.
Remote device Icon Smart phone Voice gateway LAN access point Unclassified audio Audio headset Unclassified Remote service Icon Audio service Bluetooth COM port B-2 Bluetooth PC Card from IBM: Installation and User’s Guide
Remote service Icon LAN service DUN service FAX service Business card Network service Appendix B.
B-4 Bluetooth PC Card from IBM: Installation and User’s Guide
Appendix C. Regulatory information This product complies with any mandatory product specification in any country where the product is sold. In addition, the product complies with the following. European Union (EU) This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly. Note that the radio frequency band used by this equipment has not been harmonized in all of the EU.
!" #$%& '! () *+ ,$-.
Appendix D. Help and service information This section contains information on how to obtain online and telephone technical support. Online technical support Online technical support is available during the life of your product. Online assistance can be obtained through the Personal Computing Support Web site and the IBM Automated Fax System. Online technical support IBM Personal Computing Support Web site http://www.ibm.com/pc/support IBM Automated Fax System 1-800-426-3395 (U.S.
are also available by clicking HelpCenter phone list on the IBM support Web page at http://www.ibm.com/pc/support If the number is not provided, contact your IBM reseller or IBM marketing representative. Response time may vary depending on the number and nature of the calls received. Support 24 hours a day, 7 days a week Canada (Toronto only) 416-383-3344 Canada (all other) 1-800-565-3344 U.S.A.
Appendix E. Product warranties and notices The following section provides product warranty information and legal notices. Warranty Statements The warranty statements consist of two parts: Part 1 and Part 2. Part 1 varies by country. Part 2 is the same for both statements. Be sure to read both the Part 1 that applies to your country and Part 2.
During the warranty period IBM or your reseller, if approved by IBM to provide warranty service, will provide repair and exchange service for the Machine, without charge, under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine.
When warranty service involves the exchange of a Machine or part, the item IBM or your reseller replaces becomes its property and the replacement becomes yours. You represent that all removed items are genuine and unaltered. The replacement may not be new, but will be in good working order and at least functionally equivalent to the item replaced. The replacement assumes the warranty service status of the replaced item.
1. damages for bodily injury (including death) and damage to real property and tangible personal property; and 2. the amount of any other actual direct damages, up to the greater of U.S. $100,000 (or equivalent in local currency) or the charges (if recurring, 12 months’ charges apply) for the Machine that is the subject of the claim. This limit also applies to IBM’s suppliers and your reseller. It is the maximum for which IBM, its suppliers, and your reseller are collectively responsible.
out charge, under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine. If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase and your money will be refunded. The replacement may not be new, but will be in good working order.
replacement may not be new, but will be in good working order and at least functionally equivalent to the item replaced. The replacement assumes the warranty service status of the replaced item. Any feature, conversion, or upgrade IBM or your reseller services must be installed on a Machine which is 1) for certain Machines, the designated, serialnumbered Machine and 2) at an engineering-change level compatible with the feature, conversion, or upgrade.
2. the amount of any other actual direct damages, up to the greater of U.S. $100,000 (or equivalent in local currency) or the charges (if recurring, 12 months’ charges apply) for the Machine that is the subject of the claim. This limit also applies to IBM’s suppliers and your reseller. It is the maximum for which IBM, its suppliers, and your reseller are collectively responsible.
ment of Warranty, IBM’s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim. NEW ZEALAND: The IBM Warranty for Machines: The following paragraph is added to this Section: The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited.
FRANCE: Limitation of Liability: The following replaces the second sentence of the first paragraph of this Section: In such instances, regardless of the basis on which you are entitled to claim damages from IBM, IBM is liable for no more than: (items 1 and 2 unchanged).
The following paragraph is added at the end of this Section: IBM’s entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be limited to damages.
UNITED STATES OF AMERICA: Warranty Service: The following is added to this section: To obtain warranty service from IBM, call 1-800-772-2227. Notices This publication was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area.
Bluetooth is a trademark owned by Telefonaktiebolaget L. M. Ericsson, Sweden, and licensed to IBM. Microsoft, NetMeeting, Outlook, and Windows are trademarks of the Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others.
Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Avis de conformité à la réglementation d’Industrie Canada Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.
E-14 Bluetooth PC Card from IBM: Installation and User’s Guide
E-16 Bluetooth PC Card from IBM: Installation and User’s Guide
IBM Part Number: File Number: 19K4260 0419K4260 (1P) P/N:19K4260 Printed in the United States of America on recycled paper containing 10& recovered post-consumer fiber.