Datasheet
IBM United States Hardware Announcement 113-198 IBM is a registered trademark of International Business Machines Corporation
27
Management processor Standard
Ethernet controller Not integrated (standard mezz card)
Front access connectors
KVM connector 1
3
USB connector 1
Note: The model "x" designation is geography dependent and is spelled out
explicitly in the Product number section.
1
Total system memory capacity is based on using 32 GB memory DIMMs.
2
Capacities are based on installation of two 1 TB drives.
3
Use of the IBM Flex System Console Breakout Cable provided with each chassis and sold
separately allows connection of standard KVM options.
4
One IBM Flex System CN4022 2-port 10Gb Converged Adapter is installed in this model.
For latest information on supported HDD options, visit
http://www.ibm.com/servers/eserver/serverproven/compat/us/
IBM Flex System x240 Compute Node specifications
Video subsystem
• 128 MB DDR3
• Integrated on the IMM2
Supported IBM Flex System x240 Compute Node video resolutions
Maximum Refresh
Resolution Rate Supported Bpp
640 x 400 60, 72, 75, 85 8, 16, 24
800 x 600 60, 72, 75, 85 8, 16, 24
1024 x 768 60, 72, 75, 85 8, 16, 24
1280 x 1024 60, 75 8, 16, 24
1440 x 900 60, 60 RB 8, 16, 24
1600 x 1200 60, 75 8, 16, 24
1680 x 1050 60, 60 RB 8, 16, 24
Notes:
• 24 Bpp (16.7 million colors) aligned on a 32-bit boundary for performance.
• Each resolution supports both CRT and Flat Panel monitors. For CRT monitors,
each resolution complies with CRT ISO 9241.3.
– 1440 x 900 and 1680 x 1050 are typically wide screen flat panel (non CRT)
settings so they are only available at 60 Hz.
– 1440 x 900 and 1680 x 1050 are available at 60 Hz with support for 60 Hz
Reduced Blanking Mode.
– For the resolutions supported by different operating systems, refer the
operating system documentation.
Dimensions - IBM Flex System x240 Compute Node
• Height: 55.5 mm (2.19 in.)
• Depth: 492.24 mm (19.38 in.)
• Width: 217.35 mm (8.56 in.)
• Maximum weight: 7.1 kg (15.6 lb.) (depending on the configuration when
options are added)