Datasheet

IBM�Japan�Hardware�Announcement IBM�is�a�registered�trademark�of�International�Business�Machines�Corporation

• Approximate�height:�26.1�mm�(1.03�in.)

• Approximate�width:�101.6�mm�(4.00�in.)

• Approximate�depth:�147�mm�(5.79�in.)

• Approximate�weight:�610�g�(1.34�lb)�-�2�TB,�720�g�(1.59�lb)�-�3�TB,�680�g�(1.50

lb)�-�4�TB,�700�g�(1.54�lb)�-�5�TB,�780�g�(1.72�lb)�-�6�TB

Shipping�dimensions

• Approximate�height:�95.3�mm�(3.75�in.)

• Approximate�width:�194�mm�(7.64�in.)

• Approximate�depth:�257�mm�(10.12�in.)

• Approximate�weight:�1780�g�(3.92�lb)�-�2�TB,�1890�g�(4.16�lb)�-�3�TB,�1850�g�(4.07

lb)�-�4�TB,�1870�g�(4.12�lb)-�5�TB,�1950�g�(4.30�lb)�-�6�TB

Hardware�requirements

The�HDDs�must�be�installed�in�selected�System�x�servers.

Note:�Some�OS�limitations�have�been�found�to�exist�when�using�drives�with�capacities

greater�than�2.2�TB�in�JBOD�configurations�on�6�Gbps�controllers.�With�earlier

release�versions�of�some�OSs,�the�boot�drive�must�be�2�TB�or�smaller.�However,�those

used�as�data�drives�may�utilize�the�2�TB,�3�TB,�4�TB,�5�TB,�and�6�TB�capacities.

Standards

None

Operating�environment

• Temperature:�5°�to�55°C�(41°�to�131°F)�at�-300�m�to�3,048�m�(-1000�ft�to

10,000�ft)

• Relative�humidity:�5%�to�90%�(noncondensing)

• Maximum�altitude:�3,048�m�(10,000�ft)

Japan�Energy�Saving�Standard

2�TB�and�3�TB�3.5-inch�7,200�rpm�NL�SATA�HDDs

• JEL�Product�Category�(2011):�B

• Energy�efficiency�:�<0.0022�W/GB

4�TB,�5�TB,�and�6�TB�3.5-inch�7,200�rpm�NL�SATA�HDDs

• JEL�Product�Category�(2011):�C

• Energy�efficiency�:�<0.0022�W/GB

Homologation

This�product�is�not�certified�for�direct�connection�by�any�means�whatsoever�to

interfaces�of�public�telecommunications�networks.�Certification�may�be�required�by

law�prior�to�making�any�such�connection.�Contact�an�IBM�representative�or�reseller

for�any�questions.

Hardware�requirements

None

Software�requirements

The�new�IBM�7,200�rpm�NL�SATA�3.5-inch�512e�HDDs�work�with�most�operating�systems.