Datasheet

IBM Flex System Fabric CN4093 10Gb Converged Scalable Switch 2
Part number information
The CN4093 switch is initially licensed for fourteen 10 GbE internal ports, two external 10 GbE SFP+
ports, and six external Omni Ports enabled. Further ports can be enabled, including fourteen additional
internal ports and two external 40 GbE QSFP+ uplink ports with Upgrade 1, and fourteen additional
internal ports and six additional external Omni Ports with the Upgrade 2 license options. Upgrade 1 and
Upgrade 2 can be applied on the switch independently from each other or in combination for full feature
capability. Table 1 shows the part numbers for ordering the switches and the upgrades.
Table 1. Part numbers and feature codes for ordering
Description
Part
number
Feature code
(x-config / e-config)
Switch module
IBM Flex System Fabric CN4093 10Gb Converged Scalable Switch 00D5823 A3HH / ESW2
Features on Demand upgrades
IBM Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 1) 00D5845 A3HL / ESU1
IBM Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 2) 00D5847 A3HM / ESU2
The part number for the switch includes the following items:
One IBM Flex System Fabric CN4093 10Gb Converged Scalable Switch

Important Notices Flyer

Warranty Flyer

Technical Update Flyer

Documentation CD-ROM

Note: Neither QSFP+ nor SFP+ transceivers or cables are included with the switch. They must be
ordered separately (See Table 3).
The switch does not include a serial management cable. However, IBM Flex System Management Serial
Access Cable, 90Y9338, is supported and contains two cables, a mini-USB-to-RJ45 serial cable and a
mini-USB-to-DB9 serial cable, either of which can be used to connect to the switch locally for
configuration tasks and firmware updates.
The part numbers for the upgrades, 00D5845 and 00D5847, include the following items:
Feature on Demand Activation Flyer

Upgrade activation key
