Network Router User Manual

Option Description
Metric If you configure more than one route to the
same segment for one perspective, a number
that indicates the preferred route. The closer
to 1, the more preferred the route.
Note: The numbers you use do not have to
be consecutive.
5. Click OK.
Notification policy
Use the Notification policy to configure responses sent from the Enterprise Scanner
appliance to the SiteProtector Console.
Event notification settings for Enterprise Scanner
Use the Event Notification tab in the Notification policy on the SiteProtector
Console to Enterprise Scanner enable the agent to send system events to the
SiteProtector Console.
About this task
You can configure three types of system events:
v System error events
v System warning events
v System informative events
Procedure
1. From the SiteProtector Console, create a tab to display agent policies.
2. In the navigation pane, select a group, and then open the Notification policy
for that group.
3. Click the Event Notification tab.
4. Select the check boxes for each type of event to enable:
v Alert Logging for System Error Events
v Alert Logging for System Warning Events
v Alert Logging for System Informative Events
5. Select the Enable Event Delivery to SiteProtector Console check box for each
type of event to enable:
v System error notification
v System warning notification
v System informative event notification
38 Enterprise Scanner: User Guide