Network Router User Manual

Defining ports or assets to exclude from a scan
Use the Scan Exclusion policy type on the Policy Management page to define
specific ports or assets to exclude from a scan of a group of assets.
Procedure
1. Click Scan → Policy Management in the navigation pane.
2. Select Scan Exclusion from the Policy Types list, and then click Add.
3. Type a name for the scan policy.
4. Choose an option:
If you want to... Then...
Exclude ports Use a combination of typing the ports to
exclude and choosing the ports:
v Type the ports to exclude, separated by
commas, in the Excluded Ports box.
v Click Well Known Ports, and then select
the ports to exclude.
Exclude assets Type the IP addresses (in dotted-decimal or
CIDR notation) of the hosts to exclude in the
Excluded Hosts box:
v Type an IP address, and then press ENTER.
v Type a range of IP addresses, and then
press ENTER.
Example: 172.1.1.100-172.1.1.200
v Type a combination of both choices above,
and then press ENTER.
Note: A red box is displayed around the
Excluded Hosts box until the data is
validated.
Chapter 1. Ad hoc scanning in the Proventia Manager 19