Network Router User Manual

Shutting down your Enterprise Scanner
You can shut down Enterprise Scanner from the Proventia Manager. The shut
down option also turns off the appliance.
Before you begin
If you have an agent with an early BIOS, the shut down command may not turn
off the appliance.
About this task
Use this option if you need to turn off the appliance temporarily, but plan to
continue using the agent with the same instance of SiteProtector. If you want to
shut down the agent so that you can register it with a different instance of
SiteProtector, see “Removing an agent from SiteProtector” on page 143.
In the SiteProtector Console, the agent continues to appear online for a couple of
hours. If you do not restart the appliance within a couple of hours, the status of
the agent becomes inactive. The agent goes through the normal statuses when you
restart the appliance.
Procedure
1. Log on to the Proventia Manager for the Enterprise Scanner agent.
2. Click Configuration → Registration in the navigation pane.
Note: It might take some time for Java
™
to initialize the first time you do this.
3. Click System → Tools in the navigation pane.
4. Click SHUT DOWN. The application shuts down and the appliance is turned
off.
142 Enterprise Scanner: User Guide