Network Router User Manual

If you want to... Then...
Search the Alert log file by filtering
options
1. Select Auto Off from the Refresh Data
list.
2. Select an option from the Filter Options
list.
Search value fields appropriate to the
option are displayed later in this section
in the Filter Options list.
3. Specify a search value for the chosen
filtering option:
v Select: No filter is selected.
v Risk Level: Select a risk level from the
list:
– High
– Medium
– Low
v Alert Name: Type any valid alert
name in the box.
Note: You can use an asterisk (*)
wildcard character for this option.
v Alert Type: Choose one of the
following alert types from the list:
– Enterprise Scanner
– All Update
– Update Package
– Update Install
– Update Error
– System
v Date and Time: Type the start and end
dates. Use the following format:
mm/dd/yyyy hh:mm:ss
v Source IP: Type the IP address of the
source of the alert.
Note: You can use an asterisk (*)
wildcard character for this option.
v Destination IP: Type the IP address of
the destination of the alert.
Note: You can use an asterisk (*)
wildcard character for this option.
v Source and Destination IP: Type the
IP address of the source of the alert
and the IP address of the destination
for the alert.
v Multiple Values: Specify the filter
values you want to use based on the
descriptions above.
4. Click Go.
5. If you want to refresh the view, select a
refresh option from the Refresh Data list.
The log data is refreshed at the selected
interval.
130 Enterprise Scanner: User Guide