User's Manual

IM-301
InteliMeter
™
Lighting Power-Pack
Ibis Networks ∙ 841 Bishop Street Suite 1601 ∙ Honolulu, HI 96813 ∙ www.ibisnetworks.com 2
06/21/17
COMPLIANCE
Agency File
UL916 – Energy Management Equipment E470522
ZigBee Profile (Plover) 0x114B
FCC 2AECN300
ENVIRONMENTAL
Parameter Symbol Min Typ Max Units
Operating Temperature T
O
0 25 40 C
Storage Temperature T
S
-40 100 C
Relative Humidity RH 0 95 %
PUSHBUTTON / LED
Action Result
Press (no hold) Toggle outlet state (on/off).
Pressed while plugging in Ignored.
Press and hold 3+ seconds Soft reset. Re-start socket. Similar to plugging in.
Press and hold 8+ seconds Hard reset. All conditions are set to default. Normally this sets
socket back to FACTORY channel and hive. However, if socket
has been deployed on CUSTOMER channel and hive, a hard reset
will then toggle between FACTORY and CUSTOMER settings. This
is a useful feature to correct a socket that has been accidentally
reset to FACTORY. It also provides a quick method to perform a
manual self-heal. If on FACTORY, LED will be red, CUSTOMER
green.
Color Meaning
Black Socket has no power.
Yellow Boot-up sequence in effect. Typically ½ second duration.
Flashing Red or Green Socket is attempting to join mesh network.
Red Outlet is off.
Green Outlet is on.