User's Manual

ManualsBrandsIbis Networks ManualsElectronicsRF Engine Module

IM-301

InteliMeter

™

Lighting Power-Pack

Ibis Networks

∙

841 Bishop Street Suite 1601

∙

Honolulu, HI 96813

∙

www.ibisnetworks.com 1

06/21/17

FEATURES

• 85V-305V 20A

• ZigBee Pro

• 128 bit AES Security

• 13dBm RF Power

• RoHS Compliant

• Hard-Wired

• Plenum Rated

DESCRIPTION

The IM-301 Power-Pack monitors and controls energy usage for lighting or other electrical

systems. It works with InteliSockets

to form a secure wireless mesh network for control and

reporting of data. Each network is anchored by an InteliGateway

base station providing

connectivity to the InteliNetwork

, a cloud-based data collection and analysis application. The

IM-301 provides a low voltage 24Vdc supply for motion detectors and ambient light sensors,

which can then control the operating state of the meter in either occupancy or vacancy mode

(meeting Title24 requirements). A wide input voltage range accommodates 120V, 240V, and

277V lighting systems.

PERFORMANCE

Parameter Symbol Min Typ Max Units

Input Voltage (RMS) V

85 305 V

Input Frequency 47 60 63 Hz

Output Current (RMS) I

OUT

20 A

Power Consumption 1.5 W

Reporting Interval 1 15 255 s

Accuracy (Energy) 0.5 %

Accuracy (Voltage) 1 %

Accuracy (Interval) 1 ms

Resolution 1 W-s

RF Range 50 m

RF Transmit Power -4 12 dBm

ZigBee Channels 11 26

Size 3.5 x 3.5 x 1.5 inches

Summary of content (7 pages)

PAGE 1
IM-301 ™ InteliMeter Lighting Power-Pack FEATURES • • • • • • • 85V-305V 20A ZigBee Pro 128 bit AES Security 13dBm RF Power RoHS Compliant Hard-Wired Plenum Rated DESCRIPTION The IM-301 Power-Pack monitors and controls energy usage for lighting or other electrical systems. It works with InteliSocketsTM to form a secure wireless mesh network for control and reporting of data.
PAGE 2
IM-301 ™ InteliMeter Lighting Power-Pack COMPLIANCE Agency UL916 – Energy Management Equipment ZigBee Profile (Plover) FCC File E470522 0x114B 2AECN300 ENVIRONMENTAL Parameter Operating Temperature Storage Temperature Relative Humidity Symbol TO TS RH Min 0 -40 0 Typ 25 Max 40 100 95 Units C C % PUSHBUTTON / LED Action Press (no hold) Pressed while plugging in Press and hold 3+ seconds Press and hold 8+ seconds Result Toggle outlet state (on/off). Ignored. Soft reset. Re-start socket.
PAGE 3
IM-301 ™ InteliMeter Lighting Power-Pack USAGE The IM-301 is a direct replacement for your existing power-packs, offering a quick low-cost upgrade for your lighting system. You can now monitor exact power consumption for each bank of lighting. Each InteliMeter is another wireless node on your Ibis mesh along with InteliSockets. Set lighting schedules, or use the motion detector input to trigger control of other sockets.
PAGE 4
IM-301 ™ InteliMeter Lighting Power-Pack FCC This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 5
IM-303 Inline InteliMeter™ FEATURES • • • • • • 85V-265V 30A ZigBee Pro 128 bit AES Security 13dBm RF Power Surge Protected Hard-Wired DESCRIPTION The IM-303 InteliMeter measures and controls energy consumption. It works with other InteliSocketsTM and InteliMetersTM to form a secure wireless mesh network for control and reporting of data. Each network has an InteliGatewayTM base station providing connectivity to the InteliNetworkTM, a cloud-based data collection and analysis application.
PAGE 6
IM-303 Inline InteliMeter™ COMPLIANCE Agency UL916 – Energy Management Equipment ZigBee Profile (Plover) FCC File E470522 0x114B 2AECN300 ENVIRONMENTAL Parameter Operating Temperature Storage Temperature Relative Humidity Symbol TO TS RH Min 0 -40 0 Typ 25 Max 40 100 95 Units C C % PUSHBUTTON / LED Action Press (no hold) Pressed while plugging in Press and hold 3+ seconds Press and hold 8+ seconds Result Toggle outlet state (on/off). Ignored. Soft reset. Re-start socket. Similar to plugging in.
PAGE 7
IM-303 Inline InteliMeter™ WIRING The IM-303 is designed to be hard-wired between the power feed and a standard 240V 30A hot water heater. #10 wires connect to screw terminals, designated at RED (neutral), BLACK (hot) and bare or GREEN (earth). FCC This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.