User's Manual

iBaby MonitorUser Manual
20
Answer: Red indicates that iBaby is not connected to your WI-FI. Please try the following steps:
1) The device is powered up and restarted to see if the LED light turns green.
2) The router is heavily loaded at the time, and the router is powered on and restarted.
3) iBaby is too far away from WI-FI, or there are too many middle partition walls. It is
recommended to try it near the WI-FI signal.
4) The router should be cool and not too old.
5) If it is always red, the router's WI-FI password may have been changed and the device needs
to be reinstalled.
Question 3When watching at home, the screen is black, but when you hear the sound, you
can control the rotation of the device (the LED status light behind iBaby is green)
Answer: Green indicates that iBaby is connected to your WI-FI, but the network bandwidth is
not enough. The reasons and solutions are as follows:
1) The router is heavily loaded at the time, and the router is powered on and restarted.
2) The device is powered on and restarted.
3) The APP is closed from the background of the mobile phone.
4) WI-FI is too far away from iBaby, or the nearby WI-FI is seriously interfered. If the router is
2.4G, log in to the router to optimize WI-FI. Take TP-Link router as an example: Band
bandwidth is 20M (NETGEAR) Router: Enable 20/40MHz coexistence).
5) The router should be cool and not too old.
Question 4 Watching normal at home, watching 4G outside, comparing cards, slower.
Answer: Looking at the device screen, the requirements for network bandwidth are the same as
watching video movies. The network where the device is located and the network speed of the