User's Manual

Baby Monitor User Manual
6
will restart and recover to the factory default settings.
3） WIFI Antenna Connector: Install the WIFI antenna.
4） RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust.
5） PWR: Power Indicator
6） NET: Network indicator
7） USB: Connect with IOS
3 Visit Camera from Network
3.1 Local Area Network connection
Figure 4
1.Verify iOS device is connected to a Wi-Fi network
2.Connect antenna to back of camera
3.Connect power adapter to back of camera and
plug into power outlet
4.Connect USB cable from mobile device to camera
3.2 Download and install App
Prior to using you must first install the Baby Monitor App from the App Store. THIS IS A FREE
DOWNLOAD. Please confirm the iOS is V4.0 or later. If not, update your iOS before using this
product.
If you have not install that, please launch the App Store, and search using the keyword “Baby
Monitor”, be sure your web function is enabled.
After downloading, a icon should be appeared like this: .
Launch the Baby Monitor App, it will automatically search the camera in your local area network,
and follow the instruction on the App, you can set up the camera easily.