User's Manual

iBaby Monitor User Manual
2.2 Interface of the camera
Figure 2
1） Power Input Socket: Connect Power adaptor, the adaptor‘s output is 5V 1.5A.
2） RESET Button: Press the RESET button and hold on more than 10 seconds, the
camera will restart and recover to the factory default settings.
3） WIFI Antenna Connector: Install the WIFI antenna.
4） RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust.
5） Audio Input Socket: Audio input socket is designed for connecting external
microphone. The built-in microphone will be invalidation when the external
microphone plug in.
6） Audio Output Socket: Audio output socket is for line-out audio player, such as
headphone, speaker, etc.
7） Alarm Output Socket
8） Alarming Input Pin
3 Visit Camera from Local Area Network
3.1 Local Area Network connection
Figure 3
7