User's Manual

iBaby Monitor User Manual
5.4.3 Firmware upgrade
The device runs 2 kinds of programmer, one is system firmware, the other is application
firmware. They could be upgraded separately.
Figure 30
5.4.4 Restore Factory Default
Click “Restore Factory Default”, it will pop up a dialogue to confirm if you really want to
restore the factory default. After confirmation, the system will restore the factory default
and reboot.
5.4.5 User browsing Log
After enter the log interface, you could view who and when the device is visited.
Figure 31
6 Centralization Control
This is a free software offered by factory, several devices on LAN and WAN can be
browsed at the same time. The software also supports snap, video record, alarm and so
on. The below Figure 32 is the interface.
24