User's Manual

iBaby Monitor User Manual
with the equipment, if not, we would suggest you to disable this function and do the
port-forwarding manually.
5.1.5 DDNS Setting
Please refer to the content in 4.3.
5.1.6 MSN Setting
Figure 18
User needs to apply for a MSN account for this device first, for example:
[e-mail]
. Please put this MSN account and its password as above Figure 18.
Then put your MSN account, for example: [e-mail]
, into the ‘MSN Friends
List. Then on your [e-mail]
MSN list, you can see [e-mail] is
online. You just send “url?” to [e-mail]
and you will get the WAN ip address of
this ip camera. But please make sure [e-mail]
and [e-mail]
should be MSN friends before you do the settings.
5.2 Alarm Settings
5.2.1 Alarm Setting
1） Alarm Detect
User can select the motion detection. If there is any motion, it will detect the motion and
trigger the alarm. In the motion detect sensibility, the more the figure, and the more
sensitive.
As showed in Figure 19, if any external alarm detector is connected, user will be able to
tick “Alarm Input Armed”. If the external alarm detector is an always on switch alarm,
please choose “open”. If the external alarm detector is always off switch alarm, please
choose “close”.
17